SET: WoodRat WR 900 incl. Cutter Set No. 1

Developed for cutting classic joints in solid wood, such as dovetail and finger joints, mortises and tenons, housing joints, lap joints, tongue and groove joints, as well as for profiling, cutting grooves and rabbets, and much more.When spacing fingers and tenons you are completely free and independent of templates. You work like a classic joiner by first cutting the positive part and then using it as a template for the counterpart. Instead of sawing and chiselling, you cut with the power router based on markings.The WoodRat channel is made of solid, anodised aluminium, with a sliding bar at the front that is moved horizontally without backlash by means of a steel cable. There are two clamping systems on the sliding bar. You clamp the workpiece extremely tight so that you can climb-cut tenons, tongues and raised panels without risk. In the left clamping system, you position the model and transfer the cut outline directly to the workpiece.
Above the channel is the base plate on which glides the router plate, which is guided either with two guide rails or with the centre plate. The router is screwed to the router plate. These are ideal conditions for safely working solid wood in a variety of ways - as precisely as with a router on a cross-table, but much more flexible!Additional benefits:

• Compatible with almost all known power routers
• Can work wood between 5 and 50 mm thick
• No expensive precision bits required
• Maximum clamping width up to 750 mm
• Additional applications possible with self-made accessories
• Safe climb-cutting without breakout
• High repeat accuracy
• Cutting based on markings
• All router settings are comfortable to use
• Simple, safe, maintenance-free mechanics