Woodraphic Mitre Guide 90°/45°

Magnetic saw guide for making square cuts or 45° mitres. The contact surface has a smaller cross-section compared to other saw guides. This has the great advantage that back saws such as precision or dovetail saws with a smaller saw blade width do not lose too much cutting depth. The blade width of the back saw minus 25 mm cross-section of the saw guide gives the maximum cutting depth in the workpiece. If greater cutting depths are required, the saw guide is removed when the maximum cutting depth is reached, and the saw blade is guided in the kerf.

• For sawing 90° cuts or 45° mitres
• Magnet with sliding sheet pulls the saw blade to the stop
• The magnet’s sliding sheet minimises friction and prevents wear

The sliding sheets are available separately as an accessory:

• No. 714726 for saw guide 90°
• No. 714727 for saw guide 45°