Barbour Wax Thornproof Dressing, 200 ml

0.2 litre (89,50 € / 1 litre)
17,90 €
Skladem, dodací lhůta cca 2-4 pracovní dny
zapamatovat
Číslo výrobku 825797
Značka Barbour
With the »Wax Thornproof Dressing« you can re-wax your waxed jackets, especially Barbour waxed...
With the »Wax Thornproof Dressing« you can re-wax your waxed jackets, especially Barbour waxed jackets, and maintain their water-repellent and particularly hard-wearing surface. Suitable for all types of Barbour waxed cotton, the application of Barbour wax dressing allows you to keep your waxed jackets and other waxed products in top condition.
Here are the steps for applying it properly:
1. Required utensils:You require a pan of hot water and a lint-free cotton cloth or sponge.
2. Preparation: Make sure that your jacket has been thoroughly cleaned beforehand. You can do this with a cloth and some natural soap. Be sure never to use hot water, cleaning agents, solvents, or detergent. Dry cleaning or machine washing are also not recommended.
3. Removing soap residue: If you use soap, make sure that all soap residue has been thoroughly removed afterwards with clear, lukewarm water.
4. Softening the wax: Place the wax tin in hot water to soften the wax.
5. Warming the jacket: The wax is best applied when the temperature difference between the jacket and the wax is as low as possible. It is therefore advisable to warm up the jacket slightly, for example by using a hairdryer.
6. Applying the wax: Thoroughly apply the wax to the garment using a cotton cloth or sponge. Particular attention should be paid to seams, creases and dry patches. Apply the wax as thinly as possible.
7. Massaging in the wax: Rub the wax in well instead of just painting it on.
8. Avoid overdosing: Be careful to not use too much wax dressing.
9. Even heating: For an even result, after applying the wax heat the garment evenly with a hairdryer.
10. Drying and wiping off: Hang the garment in a warm place so that it can dry overnight. After about 24 hours you can gently remove any excess wax residue with a lint-free cotton cloth.
One can of »Wax Thornproof Dressing« is usually sufficient to re-wax about one jacket. However, if your jacket has not been waxed for a long time or is particularly dry, you may need up to two cans.
    Atributy
    • Content 200 ml
    • Category Unisex
     
    více
    méně
    Zde najdete další podrobné údaje o výrobci

    Barbour

    Historie značky Barbour sahá až do roku 1894, kdy John Barbour otevřel svůj první obchod na Market Place v South Shields. Společnost se v tomto rozvíjejícím se přístavním městě na severovýchodě Anglie prosadila výrobou oděvů odolných proti povětrnostním vlivům, včetně olejových kůží, pro námořníky, rybáře a přístavní dělníky. Základy úspěchu společnosti položil John Barbour, skotský podnikatel z Galloway. S prvním katalogem výrobků v roce 1908 společnost rozšířila svou celosvětovou zákaznickou základnu a získala objednávky ze zemí, jako je Chile a Hongkong. Během světových válek vyráběla společnost oděvy odolné proti povětrnostním vlivům pro britskou armádu, včetně slavného obleku Ursula Suit, který se stal standardním oděvem pro posádky britských ponorek během druhé světové války. V roce 1936 vyvinula společnost Barbour motocyklový oblek International, který se později stal stejnojmennou bundou. Tuto bundu nosilo od 50. do 70. let 20. století mnoho motocyklistů, včetně amerického herce Steva McQueena. Postupem času Barbour rozšířil své kolekce pro lov a jezdecký sport a v roce 1974 se poprvé stal královským dodavatelem pro dvůr. V 80. letech 20. století navrhla Dame Margaret Barbour, generální ředitelka společnosti, tři legendární voskové bundy - Bedale, Beaufort a Border Jacket. Tyto bundy, které se od té doby staly ikonami značky Barbour, nadále vyrábí 120 zaměstnanců ve vlastním výrobním závodě v Anglii. Dnes rodinný podnik vede již pátá generace a stále sídlí v severovýchodní Anglii.

    Zde najdete další atributy
    • Content 200 ml
    • Category Unisex