Herdim
产品来自 Herdim
在 DICTUM 在线购买 Herdim 的产品。
Herdim System Peg Shaper, Violin, Viola
Anodized aluminium body. Brass adjustment screws. Extra hard tool steel blade (62 HRC), honed edge. Nominal Ø (final diameter at the peg collar) 7.5 mm.
Herdim Peg Shaper and Reamer, 22-Piece Set
22-piece set of tools for fitting pegs of all sizes from 1/16 violin - 4/4 cello, as well as for making peghole bushings. Peg shapers (one of each) No. 730101 , -102, -201, -202, -203; 8 repl. blades No. 730100 , 6 replacement blades No....
Herdim System Peg Reamers with 1/4 Hexagonal Shaft
The Herdim peghole reamers for violin and cello pegs can be used with the beautiful wooden handles in spindle shape or drive them with a cordless power drill. In this case the cutting action is especially smooth and effortless. Spiral...
Herdim System Smoothing Reamer with 1/4 Hexagonal Shaft
The cutting edges of the regular Herdim reamers are bevel ground to a sharp edge, resulting in an aggressive cutting action. This smoothing reamer however has cutting edges which are on one side slightly rounded, according to the radius...
Herdim System Calibrated Stop Rings for Peg Reamers
Using the calibrated stop rings on Herdim reamers enables you to trim the pegholes to a definite diameter matching precisely the final diameter of the Herdim standardized pegs. The same applies to the conical holes of endbuttons and...
Herdim Taper Pins
For setting ring-shaped peghole bushings and for smoothing the sur-faces of the holes. Made of tool steel, precision-ground conical pin, without cutting edges.
Herdim Multi Peg Shapers
The most versatile peg shaper available for professional restoration work. The Herdim Multi is variable in diameter and taper, allowing pegs to be shaped to the exact dimensions of the existing pegholes. This saves time and preserves the...
Herdim Violin, Viola Assembly Clamps, 32-Piece Set
Polyurethane clamping pads with brass-reinforced bushings. Gunmetal-finished spindles with quick-acting brass thumbscrews for easy adjustment.
Herdim Violin, Viola Assembly Clamps
Polyurethane clamping pads with brass-reinforced bushings. Gunmetal-finished spindles with quick-acting brass thumbscrews for easy adjustment.
Herdim Lateral Clamp Spindle
The ideal device for applying lateral pressure to the rib area, e.g. for leveling and properly aligning cracked ribs. Designed to be used in conjunction with Herdim violin or cello assembly clamps. Spindle with adjustable clamping pad...
Herdim Rib Corner Clamps
For regluing rib corners. After attaching the clamp to the rib corner area, pressure can be applied directly to both sides of the rib corner using the small perpendicular spindles.
Herdim Cello Assembly Clamps, 42-Piece Set
The fiber-reinforced plastic clamping pads yield a lightweight yet nevertheless very sturdy clamp. The pads feature additional flexible polyurethane inserts to prevent marking of the wood surface and varnish coat. The spindle is...
Herdim Cello Assembly Clamps
The fiber-reinforced plastic clamping pads yield a low weight yet nevertheless very sturdy clamp. The pads feature additional flexible polyurethane inserts to prevent marking of the wood surface and varnish coat. The spindle is partially...
Herdim Hand-Forged Repair Clamps
These traditional clamps, designed for the repair of musical instruments, are excellently suited to the construction of models thanks to their compact size. The two larger versions have a wide grip, and are therefore also used by...
Herdim Lower Block Clamps
For gluing the ribs to the lower block without disassembling the instrument. Once inserted into the instrument, the steel pivot automatically flips into the cross position as the screw is turned. Hardwood body lined with cork.
Herdim Aluminium Crack Clamps
The Herdim aluminium crack clamps are not only extremely low weight, they also show twisting clamping jaws which are flexible and perfectly accommodate to the contours of the instrument. The risk of chipping the edges when repairing a...
Herdim Aluminium Crack Clamps
The Herdim aluminium crack clamps are not only extremely low weight, they also show twisting clamping jaws which are flexible and perfectly accommodate to the contours of the instrument. So the risk of chipping the edges when repairing a...
Herdim U-Shaped Crack Clamps
The 4-screw system can be adjusted to any geometry of any crack. Even cracks which are significantly deformed can be brought back together by this versatile tool. Rubber padded plates and silicone pads (No. 820068 not included) enable...
Herdim Classic Soundpost Setter, Violin
Hand-forged, patterned after an old English design. Rounded edges, finest workmanship, superb balance, gunmetal finish.
Herdim Profile Patterns, 6-Piece Set
Precision patterns for shaping bridges and fingerboards. The tapered spurs at the base of the bridge patterns are for gauging the string height. 6-piece set for violin, viola and cello made of stainless steel. Sizes according to Hans...
Herdim String Lifter
Practical tools for exchanging, adjusting and fitting bridges. Designed to lift the tensioned strings of the existing bridge, allowing work to be done without risk of dropping the soundpost. The string lifter simultaneously marks the...
Herdim Drilling Template for Double Bass Necks, 2-Piece Set
Drilling of the peg holes for machine heads is made easy using the Herdim drilling templates. The drill is guided through an 10 mm drilling bushing, which controls the squaring of the drilling axis against the peg box flanks. Fits all...
Herdim Scraper Blades
Very even metal structure for a fine burr that is achieved by a special hot rolling process with simultaneous hardening treatment. Hot-rolled - the entire material is elastic and has an even structure Made of spring steel with a small...
Herdim Scraper Blades, Stainless Steel
Thanks to the use of stainless steel, this scraper blade is permanently protected against patches of rust caused by hand perspiration. It is also three times more durable than spring steel scrapers. Hot-rolled - the entire material is...
Herdim Over the Rib Repair Clamps
Some repairs as soundpost patch, opened seam and crack repair must be done on the back plate over the ribs. Clamping the cleats and patches is then, due to the rib height quite a tricky task. Using these over the rib steel clamps is an...
Herdim Neck Drilling Jig
A peghole bore either in a new violin or in one after bushing must be perfectly perpendicular to the longitudinal axis of the instrument. The drilling jig adopts both an instrument or single neck and ensures a perfect perpendicular...
Herdim精密锉刀，柜式，带桦树皮手柄。
704722 号多功能精密锉刀，采用柜式设计，可进行精细切割，包括一个随时安装的桦树皮手柄。桦树皮具有抑制真菌和细菌的作用，防水、防潮，即使在潮湿的情况下，也有很好的抓地力。即使有手汗，手柄也是手感防滑。装在棉布袋里。
Herdim Contour Line Arching Templates
Contour line back and top arching templates derived digitally from respected instrument patterns. The contour lines start from the 5 mm line, leaving the edgework around the outline on the intent and imagination of the maker. The...
