Herdim Fretboard Guards, Guitar, 3-Piece Set
Supposed to be placed over fret which is being shaped, to work without worry of fretboard damage. The rubber band holds the guard in position, the rubber band being placed in the way, it does not interfere with the tools in use. Set of 3...
Herdim Understring Radius Gauges, Guitar, 8-Piece Set
Indispensable when setting and adjusting the magnets of the pickups. The gauge, only 3 mm high at the measuring base, can be slipped under the strings without their removal. The spokes have identical radius on the top and bottom, so the...
Herdim Radius Gauges, Notched, Guitar, 4-Piece Set
The gauge tailored for quick and accurate measurement of the fretboard base radius, without necessary removal of the strings. Laser cut from 1 mm stainless steel, the set of 4 gauges can measure radii 7.25", 9.5", 10", 12", 14", 15", 16"...
Herdim Radius Gauges, Guitar, 2-Piece Set
Traditional templates for measuring of the curvature of the fretboard. Set of two covers radii 7.25", 9.5", 10", 12", 14", 15", 16" and 20". Laser cut from 1 mm stainless steel.
Sintoms Fret Bender
Precisely pre-bent frets ease fretting and re-fretting, and help to maintain the job with an unmatchable accuracy. Heavy duty device, adjustable bending radius. Can be mounted on the workbench.
€ 129.00
商品编号 707030
Fretting Rulers, Guitar
Precise rulers for marking of fret positions on a guitar fretboard. After cutting a groove for the nut fret, the ruler is secured in the position and marks for frets are made in the precisely cut notches on both sides of the ruler....
Diamond Honing Plates
Double-sided mini diamond plates for whetting, polishing and honing. Compact, light and flexible. For chamfering fret ends and levelling frets, especially on small plucked instruments, such as mandolins and ukuleles. 100 x 30 x 1 mm
Fretboard Straight Edge, Notched, Guitar
Steel ruler with precisely milled and sanded notched ruler edge for guitar fretboard straightness detection. Long and short scale notch pattern covers majority of fretting patterns.
Fretboard Straight Edge, Guitar
Steel ruler with precisely milled and sanded ruler edge for guitar fret and fretboard straightness detection.
Hosco Diamond Fret and Leveling Files
Diamond files for levelling frets and fret files, equipped with two profiles for re-profiling fret crowns after the frets have been levelled.
Ibex Splint Former
This tool should be used together with the Ibex Splint Cutter No. 717178 to precisely form a tapered splint for inserting into splint groove in the guitar top. Brass body, hex wrench included.
Ibex Splint Cutter
Most common repair of a crack of a guitar top is by inserting a tapered splint. The Ibex splint cutter executes an angled cut to form a tapered groove for a splint. Brass body, steel blade.