Filos de recambio »Standard« para OrbiCut 40, 2 unidades

Filos de recambio »Standard« para OrbiCut 40, 2 unidades
La pequeña proyección del filo de corte de 0,1 mm permite un trabajo suave y controlado. Radio de 18,55 mm.
Kirjes Sanding System
Perfect finish to any shape in wood
The quality and perception of any piece of work is largely influenced by its finish. Flat surfaces can easily be finished with a smoothing plane or sandpaper. However, concave or convex shapes, inner surfaces of rectangles and irregular shapes are much more difficult. So far, a machine finish was not possible while a hand surface was extremely time-consuming. This gap has been closed by the Swedish manufacturer Kirjes with its integrated sanding and polish system: it enables a great leap in quality and facilitates working. A sleeve of highly flexible abrasive cloth is fitted on a cylindrical or dome-shaped rubber bulb which is then inflated with a special hand pump through an air valve on the shaft. Such pneumatic drum sanders are very elastic, perfectly conforming to any shape. In addition to sanding sleeves, brush sleeves for polishing are also supplied. They will give your workpiece a polished surface. All inflatable drum sanders are fixed to the drill chuck of a 130 cm flexible shaft. The perfect tool for inner surfaces of carved and turned objects, for hard-to-reach areas, spoons, musical instruments, sculptures, ornaments, wooden toys, jewellery, knife handles etc.
     
    más
    menos
    Más informaciónes sobre el fabricante
    • Apto para Producto No. 707547
    Referencia 707549
    Marca Kirjes
    Disponible para envío inmediato, entrega en aprox. 2-4 días laborables
    19,90 € por set
    Marcar
    Muchos más modelos
    Typ Precio Cantidad
    Filos de recambio »Standard« para OrbiCut 20, 2 unidades
    Filos de recambio »Standard« para OrbiCut 20, 2 unidades
    Perfect finish to any shape in wood
    La pequeña proyección del filo de corte de 0,1 mm permite un trabajo suave y controlado. Radio 9,55 mm.

    Referencia 707548
      16,90 €
     
    Filos de recambio »Standard« para OrbiCut 40, 2 unidades
    Filos de recambio »Standard« para OrbiCut 40, 2 unidades
    Perfect finish to any shape in wood
    La pequeña proyección del filo de corte de 0,1 mm permite un trabajo suave y controlado. Radio de 18,55 mm.

    Referencia 707549
      19,90 €
     
    Passend für

    Adecuado para

    Kirjes OrbiCut 40

    Kirjes OrbiCut 40

    Para uso en ejes flexibles, taladros y destornilladores inalámbricos. Diseñadas para una eliminación rápida y eficiente del material, las dos cuchillas HSS intercambiables producen superficies muy lisas que requieren un mínimo...
    95,90 €

    incl. IVA más gastos de envío

    Referencia 707547