Un tubo de torneado de proyectiles desarrollado por David Ellsworth. De aplicación universal para...
Nuestros hierros de torneado Crown M2-HSS están disponibles en tres calidades de agarre :
Madera de haya (con borde listo para usar)li>li>li>Haya teñida (con borde de fábrica)ul>.
Un tubo de torneado de proyectiles desarrollado por David Ellsworth. De aplicación universal para el mecanizado interior y exterior, grueso y fino. Rectificado especial Ellsworth (rectificado listo para usar).
Crown Woodturning Tools - Available versions:
M2-HSS woodturning tools with factory grind
Crown standard version, the blade material used is an extremely sturdy M2-HSS. Stained beech handle. Approx. 62 HRC.
M2-HSS woodturning tools with ready-to-use bevel
The blade material used is an extremely sturdy M2-HSS. The version with ash handle manufactured exclusively for DICTUM is additionally provided with a ready-to-use bevel. Approx. 62 HRC.
M2-HSS Cryogenic woodturning tools
Improved edge life and sharpness without compromising on sharpening: Cryogenic hardening is a technically elaborate process, in which the steel is cooled down, computer-controlled, to -185 °C after hardening. After this treatment, the steel has finer carbides that cannot develop during the usual hardening process. This results in excellent properties such as a longer service life than with conventional hardening, a fine cutting edge with reduced burr formation and easier sharpening. Come with ready-to-use bevel and black stained ash handles. Approx. 62 HRC.
M42-HSS Cryogenic Turning Tools - made of an extra-hard HSS-cobalt alloy
Extremely long service life and razor-sharp cutting edges: Originally developed to meet the requirements of metal processing, M42 Steel cuts even exotic hardwood or composite materials effortlessly. The steel provides an exceptionally long service life thanks to the addition of 10% cobalt as well as the cryogenic treatment it undergoes at -185°C during the tempering process. This causes fine carbides to form, which help increase the service life and sharpenability of the steel long-term. Come with ready-to-use bevel and black stained ash handles. Approx. 65 HRC.
PRO-PM woodturning tools - made of ultra hard sintered steel
The ultimate turning tools: PRO-PM gouges are the top of the line for exotic hardwoods, laminates or wood with mineral inclusions. The alloying of steels has its limits due to their different melting points. During sintering, a new type of steel is created from powder steel under the influence of high temperature and pressure, which would not be miscible in the liquid state. The very high percentage of cobalt (8 %) and tungsten (10.5 %) make them highly durable. The tools hold their edge at least five times longer than conventional HSS tools. Come with ready-to-use bevel and black stained ash handles. Approx. 62 HRC.
- Ancho de hoja 16 mm
- Longitud total 690 mm
- Material de tirador Haya teñida
- Material de hoja Rectificado especial HSS/Ellsworth
Disponible para envío inmediato, entrega en aprox. 2-3 días laborables
109,00 € por piece(s)
Gubia de cuencos Crown Ellsworth, ancho de hoja 16 mm
Gubia de cuencos Crown Ellsworth, PRO-PM, ancho de hoja 16 mm