Tormek Multi Base MB-102
Base for sharpening on the side of diamond wheels No. 716078 , 716079 and 716080 for completely flat cutting-tool edges without hollow grind. The multi-holder is fully adjustable and allows optimal setting for each tool and each jig. The...
€79.00
incl. VAT plus shipping costs
Article No. 716081
Tormek Drill Bit Sharpening Attachment DBS-22
Sharpening the complex tip geometry of a drill by hand requires plenty of practice. Using the Tormek drill bit sharpener attachment, you can now sharpen a 4-facet drill bit with the usual wet working sharpening method on your drill for...
€224.00
incl. VAT plus shipping costs
Article No. 705231
€179.00
incl. VAT plus shipping costs
Article No. 705207
Tormek Turning Tool Setter TTS-100
For adjusting bevel angles of turning tools and chisels, independently of wheel diameter. Used in combination with jigs (SVD-186 R and SVS-50).
€27.40
incl. VAT plus shipping costs
Article No. 705237
Tormek Multi Jig SVS-50
Universal jig for turning tools and carving gouges with straight and curved cutting edges and for skew and straight chisels.
€54.00
incl. VAT plus shipping costs
Article No. 705229
Tormek Short Tool Jig SVS-38
For short gouges and V-blades. Blade length min. 45 mm, blade width max. 38 mm.
€23.80
incl. VAT plus shipping costs
Article No. 705239
Tormek Moulding Knife Jig SVP-80
Sharpens all makes and shapes of profile knifes. Also for profiled paint removal blades suitable for Tormek T-8, T-7, T-4, T-3 and old series models. For profile knifes with 24, 30 or 38 mm distance between guide holes. Not suitable for...
€172.30
incl. VAT plus shipping costs
Article No. 705238
€28.50
incl. VAT plus shipping costs
Article No. 705226
Tormek Universal Support US-103 for T-3 and T-4 Original
With fine adjustment suitable for Tormek T-3, T-4 Original and old series models.
€43.70
incl. VAT plus shipping costs
Article No. 705202
Tormek Universal Support US-105 for T-7
With fine adjustment suitable for Tormek T-7, T-8 and old series models.
€40.60
incl. VAT plus shipping costs
Article No. 705206
Tormek Pro Angle Master WM-200
For setting the grinding angle and checking the bevel geometry. Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.
€28.50
incl. VAT plus shipping costs
Article No. 705240
Tormek Sharpening Station (TS-740)
This robust sharpening station offers not just a sharpening table but also storage space for the Tormek sharpening jigs and accessories. You can adjust the working height to fit your exact size. This allows full control over sharpening,...
€779.00
incl. VAT plus shipping costs
Article No. 705233