Crown Pen Turning Tools, Ash Handle, 3-Piece Set

M2-HSS tools for pen turning. Gouge, 9 mm; oval skew chisel, 13 mm; parting tool, 3 mm.
M2-HSS woodturning tools - exclusively available with ash handle. All woodturning tool sets come with factory ground bevel.
M2-HSS tools for pen turning. Gouge, 9 mm; oval skew chisel, 13 mm; parting tool, 3 mm.
Crown Woodturning Tools - Available versions:
M2-HSS woodturning tools with factory grind
Crown standard version, the blade material used is an extremely sturdy M2-HSS. Stained beech handle. Approx. 62 HRC.
M2-HSS woodturning tools with ready-to-use bevel
The blade material used is an extremely sturdy M2-HSS. The version with ash handle manufactured exclusively for DICTUM is additionally provided with a ready-to-use bevel. Approx. 62 HRC.
M2-HSS Cryogenic woodturning tools
Improved edge life and sharpness without compromising on sharpening: Cryogenic hardening is a technically elaborate process, in which the steel is cooled down, computer-controlled, to -185 °C after hardening. After this treatment, the steel has finer carbides that cannot develop during the usual hardening process. This results in excellent properties such as a longer service life than with conventional hardening, a fine cutting edge with reduced burr formation and easier sharpening. Come with ready-to-use bevel and black stained ash handles. Approx. 62 HRC.
M42-HSS Cryogenic Turning Tools - made of an extra-hard HSS-cobalt alloy
Extremely long service life and razor-sharp cutting edges: Originally developed to meet the requirements of metal processing, M42 Steel cuts even exotic hardwood or composite materials effortlessly. The steel provides an exceptionally long service life thanks to the addition of 10% cobalt as well as the cryogenic treatment it undergoes at -185°C during the tempering process. This causes fine carbides to form, which help increase the service life and sharpenability of the steel long-term. Come with ready-to-use bevel and black stained ash handles. Approx. 65 HRC.

PRO-PM woodturning tools - made of ultra hard sintered steel
The ultimate turning tools: PRO-PM gouges are the top of the line for exotic hardwoods, laminates or wood with mineral inclusions. The alloying of steels has its limits due to their different melting points. During sintering, a new type of steel is created from powder steel under the influence of high temperature and pressure, which would not be miscible in the liquid state. The very high percentage of cobalt (8 %) and tungsten (10.5 %) make them highly durable. The tools hold their edge at least five times longer than conventional HSS tools. Come with ready-to-use bevel and black stained ash handles. Approx. 62 HRC.
     
    more
    less
    Further details on the manufacturer

    Crown

    Crown

    Hand-forging and high-grade steels make Crown Tools one of the leading manufacturers of turning tools worldwide. All of their tools are made in Sheffield, England, following a long tradition. The blades are made of ultra-edge-retaining M2-HSS as well as M42-HSS and PRO-PM steel for heavy-duty use and ultimate edge life.

    • Overall length 230 mm
    • Handle length 140 mm
    • Model Ash handle, factory grind
    Article no. 701988
    Brand Crown
    €99.90 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Including sharpening pass, two free sharpenings.
    Remember
    Many other models
    Plenty of accessories and spare parts

    Accessories

    Wall-mounted Holder for Woodturning Tools, 3 compartments

    Wall-mounted Holder for Woodturning Tools, 3 compartments

    Practical holder for your woodturning tools. Always ready to hand on the wall. The distance between the lower and upper part can be selected according to the length of the tools to be stored. For tools of different lengths, you can use a...
    variants
    €39.00

    incl. VAT plus shipping costs

    Article No. 711681