Jimmy Clewes Hollowing Tool Mate #1
Designed by Jimmy Clewes
Cutter diameter 6 mm, angle 22°.
Tool cross-section 15 x 9 mm
Tang 9 x 9 mm
Tool cross-section 15 x 9 mm
Tang 9 x 9 mm
The ideal tool for beginners and for turning bowls and jars.
- li>Replacement cutter included
Jimmy Clewes Hollowing Tools
Professional woodturner Jimmy Clewes, who is internationally renowned by woodturners all over the world, runs a woodturning school in Las Vegas. The turning tools he develops there are user-friendly and simple to use. They are extremely versatile, easy to control and ideal for beginners. High-quality materials ensure the highest efficiency and a long service life. Made in U.S.
Jimmy Clewes Mate
User-friendly multi-purpose hollowing tool with replaceable carbide cutter. These tools do not scrape, they cut! Easy to control and less aggressive thanks to the angled cutter. The probe is attached just below the surface of the tool to prevent damage. Chip-thickness limit for safe working due to short depth of cut.
Cuts wet and dry wood, spindle and faceplate wood with ease.
The ultra-sharp blades with extra-long edge life are rotated until all edges are blunt. Once all edges are used up, you replace the carbide cutter.
Advantages:
Cuts wet and dry wood, spindle and faceplate wood with ease.
The ultra-sharp blades with extra-long edge life are rotated until all edges are blunt. Once all edges are used up, you replace the carbide cutter.
Advantages:
- No resharpening of tools
- New cutters are sharp and ready for use
- 25 to 30 times longer life time than HSS
- Aluminium-coated shaft against oxidation
- Made in U.S.
- Replacement cutter included
Jimmy Clewes
- Overall length 215 mm
| Article no. | 720026 |
| Brand | Jimmy Clewes |
Accessories
Jimmy Clewes Tool Holder, Standard, Ø 12.7 mm
Fits Jimmy Clewes Hollowing Tools Mate (No. 720026 , No. 720027 ) and all steels with tang diameter 9 x 9 mm or 12.7 mm. The turning tools are fixed securely and without vibration in the anodised aluminium tool holder with two screws....
€44.90
incl. VAT plus shipping costs
Article No. 720031
Jimmy Clewes Tool Holder, Quick Release, Ø 15.9 mm
Fits Jimmy Clewes Hollowing Tools (No. 720048 ) and all steels with Ø 15.9 mm (⅝ inch) tang. The turning tools are fixed quickly, easily and securely in the anodised aluminium tool holder by the Quick Release fastener. Optionally, the...
€57.80
incl. VAT plus shipping costs
Article No. 720047
Jimmy Clewes Adapter Ø 12.7 mm for Tool Holder No. 720047
Fits tool holder no. 720047 . Reduces the shank diameter from 15.9 mm to 12.7 mm.
€26.50
incl. VAT plus shipping costs
Article No. 720049
Replacement parts
€19.90
incl. VAT plus shipping costs
Article No. 720028