Prices with or without VAT?
This setting applies to all prices but may be changed at any time.
 

Veritas Plane Body for Smooth Plane No. 4 with PM-V11 Steel Blade

This product is no longer available.
For general smoothing, finish work and trimming parts Provides a smooth cut without being...
Incl. PM-V11 Steel Blade
  • For general smoothing, finish work and trimming parts
  • Provides a smooth cut without being tiring to use
Custom Bench Planes
All the plane bodies are fully stress-relieved ductile cast iron. The soles are machined flat and square to the sides, and they have extra-large side wings for stable shooting. The planes all have a stainless-steel Norris-type combined feed and lateral adjustment mechanism for easy and accurate blade setting. Two set screws register the blade in the throat. The movable toe plate allows quick mouth adjustments - loosening the front knob lets you close the mouth to a narrow slit for fine shavings and minimum tear-out, or open it for heavier cuts. A stop-screw in the throat retains mouth settings and prevents accidental contact with the blade.
The cap iron registers on a low-profile blade carrier attached to the blade, which allows fast removal of the cap iron for blade sharpening. It also lets you restore the cap iron without losing its position relative to the cutting edge. Die Klappe zur Fixierung des Hobelmessers ist schnell abnehmbar und ermöglicht ein einfaches Entnehmen und Nachschärfen des Hobeleisens. Beim erneuten Aufsetzen der Klappe ist kein Nachstellen nötig. Zwei Gewindebohrungen auf beiden Seiten erlauben die Montage eines optional erhältlichen Seitenanschlages (patentiert).
     
    more
    less
    Hier finden Sie weitere Details zum Hersteller

    Veritas

    • Blade material PM-V11™
    • Blade width 51 mm
    • Overall length 240 mm
    • Weight 1.88 kg
    Article no. 702441
    Brand Veritas
    €223.00 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Including sharpening pass, two free sharpenings.
    Remember
    Many other models
    Type Price Quantity
    Veritas Plane Body for Smooth Plane No. 4 with PM-V11 Steel Blade
    Veritas Plane Body for Smooth Plane No. 4 with PM-V11 Steel Blade

    Incl. PM-V11 Steel Blade

    Article number 702441
      €223.00
     

     
     
    Plenty of accessories and spare parts

    Accessories

    Veritas Frog 51 mm, 40°

    Veritas® Frog 51 mm

    Fits No. 702410 and 702412 . Cutting angle 40°: Suitable for end-grain fibers Cutting angle 55°: Suitable for dealing with tear-out in difficult grain and figured wood
    €51.00

    incl. VAT plus shipping costs

    Article No. 702419

    Veritas Traditional Tote, Large

    Veritas® Traditional Tote

    More pronounced forward angle lean and more curved than the Veritas tote More comfortable to use on low surfaces Allows you to apply more downward force to the plane Based on historical plane handle design Sizing Information:...
    €21.00

    incl. VAT plus shipping costs

    Article No. 702433

     

    Replacement parts

    Veritas PM-V11 Plane Blade, 51 mm

    Veritas PM-V11 Plane Blade, 51 mm

    Fits No. 702410 and 702412 .
     
    €45.00

    incl. VAT plus shipping costs

    Article No. 702416

     
    Viewed