Designed by Woodworkers.
Developed for cutting classic joints in solid wood, such as dovetail and finger joints, mortises and tenons, housing joints, lap joints, tongue and groove joints, as well as for profiling, cutting grooves and rabbets, and much more.
When spacing fingers and tenons you are completely free and independent of templates. You work like a classic joiner by first cutting the positive part and then using it as a template for the counterpart. Instead of sawing and chiselling, you cut with the power router based on markings.
The WoodRat channel is made of solid, anodised aluminium, with a sliding bar at the front that is moved horizontally without backlash by means of a steel cable. There is a clamping systems on the sliding bar. You clamp the workpiece extremely tight so that you can climb-cut tenons, tongues and raised panels without risk. In the left clamping system, you position the model and transfer the cut outline directly to the workpiece.
- Number of Fences2
- Workpiece Width max.750 mm
- Dimensions960 mm
Prices incl. VAT
SET: WoodRat WR900, Cutter Set 1, PlungeBar C/F, Bosch Router GOF 1600 CE
Article number 717652
SET: WoodRat WR900, Cutter Set 2, PlungeBar C/F, Bosch Router GOF 1600 CE
Article number 717658