Dedicated Plunge Bar for e.g. MAFELL LO 65 Ec, Bosch GOF2000/1600, Dewalt 626 6182, Fein RT-1800, Makita 3621, Trend T9
Delivery without router.
Designed by Woodworkers.
Developed for cutting classic joints in solid wood, such as dovetail and finger joints, mortises and tenons, housing joints, lap joints, tongue and groove joints, as well as for profiling, cutting grooves and rabbets, and much more.
When spacing fingers and tenons you are completely free and independent of templates. You work like a classic joiner by first cutting the positive part and then using it as a template for the counterpart. Instead of sawing and chiselling, you cut with the power router based on markings.
The WoodRat channel is made of solid, anodised aluminium, with a sliding bar at the front that is moved horizontally without backlash by means of a steel cable. There is a clamping systems on the sliding bar. You clamp the workpiece extremely tight so that you can climb-cut tenons, tongues and raised panels without risk. In the left clamping system, you position the model and transfer the cut outline directly to the workpiece.
Prices incl. VAT