Prices with or without VAT?
This setting applies to all prices but may be changed at any time.
 

WoodRat WR900

WoodRat - probably the most versatile system for your power router.

Developed for cutting classic joints in solid wood, such as dovetail and finger joints, mortises...
Developed for cutting classic joints in solid wood, such as dovetail and finger joints, mortises and tenons, housing joints, lap joints, tongue and groove joints, as well as for profiling, cutting grooves and rabbets, and much more.
When spacing fingers and tenons you are completely free and independent of templates. You work like a classic joiner by first cutting the positive part and then using it as a template for the counterpart. Instead of sawing and chiselling, you cut with the power router based on markings.
The WoodRat channel is made of solid, anodised aluminium, with a sliding bar at the front that is moved horizontally without backlash by means of a steel cable. There are two clamping systems on the sliding bar (or only one on the WoodRat 600). You clamp the workpiece extremely tight so that you can climb-cut tenons, tongues and raised panels without risk. In the left clamping system, you position the model and transfer the cut outline directly to the workpiece.
Above the channel is the base plate on which glides the router plate, which is guided either with two guide rails or with the centre plate. The router is screwed to the router plate. These are ideal conditions for safely working solid wood in a variety of ways - as precisely as with a router on a cross-table, but much more flexible!
Additional benefits:
  • Compatible with almost all known power routers
  • Can work wood between 5 and 50 mm thick
  • No expensive precision bits required
  • Maximum clamping width up to 750 mm
  • Additional applications possible with self-made accessories
  • Safe climb-cutting without breakout
  • High repeat accuracy
  • Cutting based on markings
  • All router settings are comfortable to use
  • Simple, safe, maintenance-free mechanics

    Scope of delivery

    • WR 900 with fitted sliding bar
    • 2 guide rails
    • 2 aluminium fences
    • 2 cam locks
    • base plate
    • router plate
    • centre plate
    • clear centre liner
    • dust chute
    • cutter block
    • parallelogram
    • raising plate
    • aluminium stop
    • 2 stops
    • spare-parts pack
    • 2 acrylic slats
    • measuring rod and cursor
    • adhesive tape
    • NEW:Detailed and revised German manual (English on demand)
    • Includes voucher for a one day course Making Classic Wood Joints with the WoodRat.
    • Power router not included!
     
    more
    less
    Hier finden Sie weitere Details zum Hersteller

    WoodRat®
    Designed by Woodworkers.
    Developed for cutting classic joints in solid wood, such as dovetail and finger joints, mortises and tenons, housing joints, lap joints, tongue and groove joints, as well as for profiling, cutting grooves and rabbets, and much more.

    When spacing fingers and tenons you are completely free and independent of templates. You work like a classic joiner by first cutting the positive part and then using it as a template for the counterpart. Instead of sawing and chiselling, you cut with the power router based on markings.

    The WoodRat channel is made of solid, anodised aluminium, with a sliding bar at the front that is moved horizontally without backlash by means of a steel cable. There is a clamping systems on the sliding bar. You clamp the workpiece extremely tight so that you can climb-cut tenons, tongues and raised panels without risk. In the left clamping system, you position the model and transfer the cut outline directly to the workpiece.

    Additional links

    Related Links

    Woodrat
     

    Further information

    Our Services Tips & Tricks Workshops
    • Number of Fences2
    • Workpiece Width max.750 mm
    • Dimensions960 mm
    Article no. 717600
    Brand WoodRat
    Ready to ship today, Delivery time 1-3 workdays within Germany
    €629.00 per piece

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Type Price Quantity
    a:3:{s:2:"DE";s:13:"WoodRat WR900";s:2:"EN";s:13:"WoodRat WR900";s:2:"FR";s:13:"WoodRat WR900";}
    WoodRat WR900

    Article number 717600
      €629.00
     

     
     
    Plenty of accessories and spare parts

    Accessories

    WoodRat Cutter Set No. 1
    WoodRat® Cutter Set No. 1
    A specially chosen range of cutters for dovetailing, morticing and tenoning on the WoodRat. It's the perfect way to get started using a 1/4" or 8 mm router. Includes: WR-8-7-12-6 Dovetail bit for small drawers and boxes (shank...
    €124.00

    incl. VAT plus shipping costs

    Article No. 717601

    WoodRat Cutter Set No. 2
    WoodRat® Cutter Set No. 2
    A specially chosen range of cutters for dovetailing, morticing and tenoning on the WoodRat. Its the perfect way to get started using a 1/2" router. This set also contains extra-long conversion sleeves for use with the supplied 8 mm...
    €209.00

    incl. VAT plus shipping costs

    Article No. 717602

    WoodRat Cutter Set No. 3
    WoodRat® Cutter Set No. 3
    The Fill-in Set transforms Set No. 1 or No. 2 into a finely graded dovetail cutter collection. Now youll always have the perfect cutter to match your wood thickness, even down to 8 mm! Includes: WR-8-7-14-7 (shank 8 mm, dovetail...
    €75.00

    incl. VAT plus shipping costs

    Article No. 717603

    WoodRat Classic Drawer-Front Dovetail, 4-Piece Set
    WoodRat® Classic Drawer-Front Dovetail, 4-Piece Set
    Unique to WoodRat, these 1:9 slope, classic drawer-front dovetail cutters are the finest available anywhere. Create those fine pins that are the hallmark of the very best cabinetwork. Note: These cutters are sold in pairs in recognition...
    €69.00

    incl. VAT plus shipping costs

    Article No. 717604

    WoodRat Plunge Bar A
    WoodRat® Plunge Bar A
    The WoodRat PlungeBar dramatically improves the action of depthing a router. It consists of two or three bars that attach in place of, or above, the existing handles. Depthing and fine adjustment are now smooth, fingertip actions thanks...
    €40.20

    incl. VAT plus shipping costs

    Article No. 717622

    WoodRat Plunge Bar B
    WoodRat® Plunge Bar B
    The WoodRat PlungeBar dramatically improves the action of depthing a router. It consists of two or three bars that attach in place of, or above, the existing handles. Depthing and fine adjustment are now smooth, fingertip actions thanks...
    €40.20

    incl. VAT plus shipping costs

    Article No. 717623

    WoodRat Plunge Bar C / F
    WoodRat® Plunge Bar C / F
    The WoodRat PlungeBar dramatically improves the action of depthing a router. It consists of two or three bars that attach in place of, or above, the existing handles. Depthing and fine adjustment are now smooth, fingertip actions thanks...
    €40.20

    incl. VAT plus shipping costs

    Article No. 717624

    WoodRat Plunge Bar D
    WoodRat® Plunge Bar D
    The WoodRat PlungeBar dramatically improves the action of depthing a router. It consists of two or three bars that attach in place of, or above, the existing handles. Depthing and fine adjustment are now smooth, fingertip actions thanks...
    €40.20

    incl. VAT plus shipping costs

    Article No. 717625

    WoodRat Mitre Box MB3
    WoodRat® Spannlade für Gehrungen
    The Mitre Box fits firmly into the cam clamp and holds work at any angle to the cutter. You can use it to make mitred (secret) dovetails, mitred laps or even hold table-legs horizontal to cut sliding dovetails. The Mitre Box is also used...
    €66.00

    incl. VAT plus shipping costs

    Article No. 717627

    WoodRat CamLock
    WoodRat® CamLock
    Complete CamLock (sliding part).
    €15.90

    incl. VAT plus shipping costs

    Article No. 717628

    WoodRat Parallelogram
    WoodRat® Parallelogram
    Replacement Parallelogram kit.
    €8.40

    incl. VAT plus shipping costs

    Article No. 717629

    WoodRat Star Knob
    WoodRat® Star Knob
    Replacement Star Knob.
    €2.20

    incl. VAT plus shipping costs

    Article No. 717630

    WoodRat Centre Plate
    WoodRat® Centre Plate
    Complete Centre Plate with Button.
    €7.60

    incl. VAT plus shipping costs

    Article No. 717631

    WoodRat Centre Liner
    WoodRat® Centre Liner
    Replacement Clear Centre Liner.
    €1.50

    incl. VAT plus shipping costs

    Article No. 717632

    WoodRat Reducing Sleeve DR-H-SLV-8 (½" > 8 mm)
    8 mm)"> WoodRat® Reducing Sleeve DR-H-SLV-8 (½" > 8 mm)
    Reducing sleeve designed especially for use in the Muscle Chuck. Also works perfectly in a standard collet. Features a rounded end for easy insertion and an integral collar to prevent the sleeve from disappearing into the chuck.
    €16.20

    incl. VAT plus shipping costs

    Article No. 717633

    WoodRat Alu Stopper
    WoodRat® Alu Stopper
    Additional stop with thumb screw to be mounted into the grooves of the WoodRat channel. For limiting milling travels, e.g. when grooving, tenoning, making sliding dovetails and finger joints.
    €12.10

    incl. VAT plus shipping costs

    Article No. 717635

    MR4 Mortise / Tenon device for WoodRat WR900
    MR4 Mortise / Tenon device for WoodRat WR900
    The MR4 is an exact solid aluminum U-rail to fix square timbers and wood strips. With the MR4 milling of tenons, cross grooves and slots on square timbers (such as table legs) with the WoodRat are precise, fast and versatile. The...
    €199.00

    incl. VAT plus shipping costs

    Article No. 717636

    MAFELL Hand Router LO 65 Ec MaxiMAX in T-MAX
    MAFELL Hand Router LO 65 Ec
    Sheer power and high torque take on a whole new meaning with the high-output CUprex motor. It offers performance-optimized digital electronics and newly developed control technology. Its speed is continuously variable according to the...
    €875.00

    incl. VAT plus shipping costs

    Article No. 704060

    Bosch Plunge Router GOF 1250 LCE Professional in L-BOXX
    Bosch Plunge Router GOF 1250 LCE Professional in L-BOXX
    Your benefits: Ergonomic handle design for different grip positions to suit the job at hand Patented routing depth fine adjustment in 1/10-mm steps when plunge function is locked, with digital display New patented spindle lock...
    €419.00

    incl. VAT plus shipping costs

    Article No. 704171

    Bosch Plunge Router GOF 1600 CE Professional carton boxed
    Bosch Plunge Router GOF 1600 CE
    Accurate working thanks to precise fine-adjustment and optimum visibility of the workpiece. With its transparent slide plate and 2-LED illumination, the GOF 1600 CE allows optimum control of the routing operation. The routing depth can...
    €399.00

    incl. VAT plus shipping costs

    Article No. 704109

    Festool Router OF 1010 EBQ-Set
    Festool Router OF 1010 EBQ-Set
    Profiling, grooving, rebating, and routing dovetails – these are just some of the applications of the OF 1010. It has a wide range of technical solutions at the ready for these tasks and more. Your benefits: Light weight and...
    €479.00

    incl. VAT plus shipping costs

    Article No. 706655

    Festool Router OF 1400 EBQ-Plus
    Festool Router OF 1400 EBQ-Plus
    The 70 mm routing stroke and extensive range of accessories for the OF 1400 leave nothing to be desired. For perfect routing results and easy handling. Your benefits: Routing depth adjustment to 1/10 mm Torsionally rigid base plate...
    €599.00

    incl. VAT plus shipping costs

    Article No. 706656

     

    Customers also viewed

    Green Wood Turning
    €255.00

    incl. VAT Workshop No. KU1301702

    Viewed