SPECIAL OFFER: ERIKA 85 Ec + Extension/ Routertable, 2 Rails, 2 extra saw blades

This set transforms the MAFELL ERIKA 85 Ec into a multifunctional woodworking centre. Profiling and trimming battens, cutting mortises and tenons, rebating and mitering frames… all with the ERIKA!The extension and router table is mounted to the right or left of the machine table using the two support rails. This more than doubles the support rews and inserts (included in router adapter kit No. 704046K), you can mount your MAFELL hand router LO 50 E/LO 65 Ec quickly and easily under the extension and router table. An adapter for third-party devices is also available as an extra. This converts your hand router into a practical table router. And best of all: Therwidth, so that workpieces up to 1.30 m wide sit firmly, allowing rip cuts up to 980mm wide using the parallel fence. To extend the machine table on both sides, the 1m-long support and mounting rails even accommodate a second extension and router table (No. 704064K, 704023K). With only two sce are two possible ways of mounting the router table: 1. with the dovetail profile and router fence on the left (the connection for the dust extraction faces towards the machine table) - ideal for cutting battens and small workpieces. The circular saw can still be used.
Or 2. You mount the router unit with the profile and router fence on the right (the connection for the dust extraction faces away from the machine table) and plunge the circular saw blade completely into the housing. This way you can use the whole machine table for support, for example to rebate complete wardrobe doors or to profile large workpieces.