MAFELL Cross-Cutting System KSS 400 in Carrying Case and Guide Rail F 160

Forget everything you know about portable circular saws!The MAFELL KSS 400 Cross-Cutting System is completely different. Its novel feature is the unique guide track that not only guides the portable circular saw, but is also connected to it to form a single unit: the KSS 400 Cross-Cutting System. Its clearly a cut above the rest. The KSS 400 Cross-Cutting System enables you to saw in a standing position and without a rest, with angular precision and with only one hand on the machine. Its handling is unbeatable: thanks to magnesium die-cast components, the entire system weighs only 5.2 kg.Once the cut has been executed, the saw automatically returns to the starting position. The maximum cutting length, exploiting the full cutting depth, is 400 mm.The pivot point of the KSS 400 is directly aligned with the rubber lip, so that only one marking pointer is required irrespective of the angle setting, with or without a rail. The rubber lip is embedded in the rail profile and can be changed quickly and simply as required. Application:

• Cross cuts with guide
• Rip cuts and cross-cutting
• Plunge cuts and recesses
• Compatible materials include e.g. board materials, doors, worktops, parquet and laminate flooring, cladding