Get some oddments of solid acacia and walnut boards with a thickness of about 30 mm. The size depends on the size of your project. We recommend that you print out the templates and take them as a sample while searching for the right piece of wood. If you choose more complex shapes which can only be created using a fretsaw, we recommend to choose relatively thin softwood and not to drill the holes for the tea lights until the bottom.
As a second step you need the right saw. If you have a keyhole saw, you can use this saw or a good hand saw, e. g. Kataba Universal or Akagashi Hardwood 210, which is especially designed for sawing hardwood. For more complex shapes we recommend to use the precision fretsaw TN-03.
Draw the outlines on your piece of wood according to the cut out template. To saw the wood, fix it in a vice or use a clamp. Finally, finish the surface and edges with sandpaper.
Drilling the candle holder
Drill the holes using the appropriate Forstner bit into the wood. You can either lower the tea lights into the wood or let them project.
If you wish, you can further decorate your candle holder, for example by applying glitter stars that you can fix using spray-on glue. You can also treat the surface using linseed oil or our DICK wood balm.
For more information, our experts are at your service
Should you have any difficulties when realizing our projects, please do not hesitate to contact us, we will be at your disposal.
You can reach our experts at the following hotline: +49 (0) 991 9109 922.