Prices with or without VAT?
This setting applies to all prices but may be changed at any time.
 

In a piece of furniture, it's not just the quality of the material but also the workmanship that's important. What mostly catches the eye is the design.

We often notice specific details only subconsciously, and yet it's these details that bring a piece to life or make it a flop.

Today's tip shows you how to give a box a natural impression.

Made from one piece of wood

Let's assume you're making a jewellery box out of solid wood. As a general rule, you should use a single piece of wood for an object of this size. Different boards, even when cut from the same trunk, may vary considerably in shade.

The common method

If you use a long board and separate it at the required points, the woodgrain only matches on three sides. Where the ends of the board meet, the grain doesn't merge seamlessly. This is because the grain is hardly ever straight but usually has a structure which reflects the vitality of the wood.

This is how you achieve a continuous smooth grain

The trick is to cut the individual pieces differently. To achieve a continuous smooth grain, you need a board that's at least twice as thick, which you mark as follows:

Step-by-step explanation:

  1. Marking the front

    First you mark the short piece on the front left. The rest of the front will be the long part of your box.

    Graphics: Marking the front
  2. Marking the back mirror-inverted

    On the back you mark the other two pieces in mirror inversion. If both parts are the same length, you will need to mark them so you can tell them apart later. The procedure is the same.

    Graphics: Marking the back mirror-inverted
  3. Marking the pieces

    Before you cut the pieces, we advise you to mark them with a triangle to avoid mixing them up. At the end there is only one possible way of assembling the pieces so that you see the whole triangle.

    The open sides of the triangle must always face inwards.

    Graphics: Marking the pieces
  4. Assembly

    If you now cut and assemble the pieces, you will have a continuous grain on all sides.

    Graphics: Assembly

For more information, our experts are at your service

Should you have any difficulties when realizing our projects, please do not hesitate to contact us, we will be at your disposal.

You can reach our experts at the following hotline: +49 (0) 991 9109 922.

Viewed