Riveting Hammer, Upper Part, 50 x 50 mm, Ash Handle
Straight riveting hammer for forging attachments such as knife tangs. The riveting hammer enables very precise work. Depending on the shape of the riveting hammer face and its lower part, different workpiece shapes can be achieved....
€89.00
incl. VAT plus shipping costs
Article No. 745236
Planishing Hammer, Upper Part, 70 x 70 mm, Ash Handle
In blacksmithing or art forging, the original rough shape of the workpiece is often subsequently reworked in a red-hot state to eliminate unwanted structural irregularities. The planishing hammer is used to smooth the forged surfaces and...
€89.90
incl. VAT plus shipping costs
Article No. 745234
Blacksmith's Tong, Flat Jaws
Blacksmith's tong with flat jaws for flat workpieces. Forged from C-35 or C-45 carbon steel Black paint prevents corrosion Long shanks allow for high leverage Lap-joint ensures the stable connection of both shanks
€19.90
incl. VAT plus shipping costs
Article No. 727845
Pick Up Tongs
Blacksmith's tong with curved flat jaws. Forged from C-35 or C-45 carbon steel Black paint prevents corrosion Long shanks allow for high leverage Lap-joint ensures the stable connection of both shanks
€20.90
incl. VAT plus shipping costs
Article No. 727846
Stahlamboss mit zwei Hörnern, norddeutsche Form
Forging anvil made of alloyed tool steel, with two horns, hardened, ground face and pritchel hole. Hardy hole serves as holder for anvil tools.
€864.00
incl. VAT plus shipping costs
Article No. 714214
Schmiedeamboss mit zwei Hörnern, süddeutsche Form, mit Voramboss
Anvil made of high quality tool steel, with two tapering horns, hardened, ground face and pritchel hole. Hardy hole serves as holder for anvil tools. Also suitable for shoeing and for use in schools.
€1,099.00
incl. VAT plus shipping costs
Article No. 714216
Schmiedeamboss mit zwei Hörnern, süddeutsche Form, ohne Voramboss
Anvil made of high quality tool steel, with two tapering horns, hardened, ground face and pritchel hole. Hardy hole serves as holder for anvil tools. Also suitable for shoeing and for use in schools.
€945.00
incl. VAT plus shipping costs
Article No. 714219
Anvil Hardy
The hardy is used to remove excess material from the red-hot workpiece. For use with a standard anvil with square hardy hole 25 x 25 mm. Edge width: 50 mm; Total height: 150 mm.
€49.90
incl. VAT plus shipping costs
Article No. 745233
Anvil Horn
Anvil horn for use with a standard anvil with square hardy hole 25 x 25 mm. The anvil horn is used to make eyelets, eyes, rings, bends and various flourishes. Diameter at the bottom of the horn: 50 mm; Height of the conical horn: 150 mm;...
€49.90
incl. VAT plus shipping costs
Article No. 745232
Planishing Hammer, Lower Part, 70 x 70 mm
In blacksmithing or art forging, the original rough shape of the workpiece is often subsequently reworked in a red-hot state to eliminate unwanted structural irregularities. The planishing hammer is used to smooth the forged surfaces and...
€69.90
incl. VAT plus shipping costs
Article No. 745235
Riveting Hammer, Lower Part, 50 x 50 mm
Straight anvil insert for forging attachments such as knife tangs. The lower part of the riveting hammer enables very precise work. Depending on the shape of the riveting hammer surface, different workpiece shapes can be achieved. The...
€59.00
incl. VAT plus shipping costs
Article No. 745237
Pen Splitter for Sorby Peter Child Pyrography Tool
The splitter saves time and allows a quick and safe change between the holders. Parallel heating of two holders, which can be easily and conveniently placed in the integrated supports and switched on and off separately, allowing two...
€45.30
€39.00
incl. VAT plus shipping costs
Article No. 701734
Hacksaw
Universal use for cutting metal and plastics. You can tension the blade quickly and easily thanks to a spring-loaded tensioning mechanism integrated in the handle. Aluminium frame for maximum rigidity Eight cutting positions in 45°...
€54.90
incl. VAT plus shipping costs
Article No. 712019
Replacement Blades for Hacksaw
Japanese top quality, long edge life and sharpness. HSS steel. 2-Piece Set.
€9.90
incl. VAT plus shipping costs
Article No. 703919
One-hand Yarri-Kanna
For fine sculpting work, instrument making and restoration. Core made of White Paper Steel, handle made of Japanese red oak.
€89.00
incl. VAT plus shipping costs
Article No. 710096
Two-hand Yarri-Kanna
For planing large wooden surfaces in carpentry and sculpting. Core made of Blue Paper Steel, handle made of Japanese red oak.
€287.00
incl. VAT plus shipping costs
Article No. 710095
Punches, 3-Piece Set
These punches are excellent for texturing the background of relief carvings, for adding decorative patterns to woodturned items or for giving strikingly realistic metal look surfaces to wooden workpieces using the airbrush technique....
€62.10
incl. VAT plus shipping costs
Article No. 708440
Special Offer: Mini-Turbo Arbortech plus 2 Replacement Cutters...
A real revolution in wood sculpting: The milling disc can be used either directly on the Arbortech Mini-Carver (No. 728870 , 715608 ) or with a standard angle grinder with 14 mm spindle (100 mm and 115 mm disc diameter), fitted via the...
€116.00
incl. VAT plus shipping costs
Article No. 715284
Special Offer: Arbortech TurboShaft plus 2 Replacement Cutters...
Router bit designed for free-hand shaping and routing. Fits to any 100/115 mm standard angle grinder. It is perfect for detailed free-hand sculpting and combines efficiency and exceptional control. It can be led free-hand easily and...
€109.00
incl. VAT plus shipping costs
Article No. 715262
Special Offer: Arbortech Industrial PRO Set plus 3 Replacement...
Blade with three replaceable tungsten carbide teeth and guard for Power Carving Unit (No. 728870 ) or 100 / 115 mm angle grinders. Adjustable guard can be used as a depth gauge or guide for straight cutting. Comes with German-language...
€119.00
incl. VAT plus shipping costs
Article No. 715232
Offer: Arbortech Industrial PRO Woodcarving Blade plus 3...
Ø 100 mm blade with three replaceable tungsten carbide teeth for 100 and 115 mm angle grinders. The blade should only be used with the Arbortech guard. Comes with German-language instruction manual compiled by DICTUM.
€109.00
incl. VAT plus shipping costs
Article No. 715233
King Arthur's Tools Merlin2, Set B
The Merlin2 offers new possibilities for wood shaping. It enables excellent control and light stock removal when shaping wood sculptures, finishing turned wooden bowls, carving small hollows or texturing surfaces. The slim gearbox neck...
€256.90
incl. VAT plus shipping costs
Article No. 715409
King Arthur's Tools Merlin2 Complete Surface Set, Nick Agar...
The perfect selection of abrasive, grinding, and polishing discs for woodturners, wood sculptors, metalworkers, model makers, and surface technicians. The comprehensive accessory set enlarges the areas in which long neck angle grinder...
€569.00
incl. VAT plus shipping costs
Article No. 715408
Foredom Mill Motor with Flexible Shaft, Complete Set
Popular hang-up motor for universal use with clockwise and anti-clockwise rotation and up to 18 000 rpm. The powerful and highly flexible shaft measuring 95 cm in length allows for a wide range of movement and access to tight spaces. The...
€493.00
incl. VAT plus shipping costs
Article No. 711157
Foredom Carver with Shaft and Handpiece
Low-speed hang-up motor with high torque for woodcarving. The powerful, ultra-flexible, 90 cm long shaft allows a large range of movement and access to tight spaces. The manual switch allows you to set the infinitely adjustable speed (up...
€529.00
incl. VAT plus shipping costs
Article No. 711136
Moviluty MOVIX Milling Motor
Powerful motor for flexible shafts. The 900 W motor and an electronic speed controller in the foot switch offer optimum results even under continuous load in wood, metal, stone, plastic or glass, for engraving, brushing, grinding,...
€579.00
incl. VAT plus shipping costs
Article No. 727580
Sorby Peter Child Pyrography Tool
The compact pyrography tool from Sorby is very popular especially amongst woodturners. Thanks to the particularly light and well-balanced burner tip, it is very easy to decorate detailed objects. The loop tips heat up to maximum...
€159.90
incl. VAT plus shipping costs
Article No. 720449
Burnmaster Hawk Pyrography Tool, Set
In contrast to the Eagle, the Burnmaster Hawk has only one pen, but in terms of performance and handling the two are identical. Thanks to the high 130 W power, the tips heat up to maximum temperature within just a few seconds. Whether...
€289.00
incl. VAT plus shipping costs
Article No. 715425
Burnmaster Eagle Woodburner Set, incl. 15 Tips
This set has everything you need for quality woodburning with maximum convenience. Thanks to the high 130 W power, the tips heat up to maximum temperature within just a few seconds. Whether light shading or deep burning, the continuously...
€414.00
incl. VAT plus shipping costs
Article No. 715300
Replacement Tungsten Carbide Blades for Arbortech Industrial...
3 x K40 tungsten carbide teeth and 3 x M3 Torx screws.
€38.50
incl. VAT plus shipping costs
Article No. 715234
Arbortech Pro-Guard Polycarbonate Guard
For fitting on 100 and 115 mm angle grinders. Adjustable, can be used as a depth gauge or guide for straight cutting. Comes with German and English instructions.
€36.90
incl. VAT plus shipping costs
Article No. 715235
Arbortech TurboPlane
Universal wood-shaping blade with three teeth for individual woodworking. For creating large even surfaces that require minimal sanding and for free-formed convex and concave shapes. Excellent control and balance in free-hand sculpting,...
€119.00
incl. VAT plus shipping costs
Article No. 715247
Auriou Rasp Blades, Hand-Cut
Machine-supported rasping allows fast and effective removal of material, creating fine surfaces when working along or across the grain as well as on end grain. Whether concave or convex shapes, edges, profiles or chair seats, the...
€89.90
€79.00
incl. VAT plus shipping costs
Article No. 704544
Typhoon Carbide Rotary Rasp Cutters, Coarse
Cutter bits with edge-retaining metal needles of tungsten carbide for modelling and smoothing softwood and hardwood, rubber, plastics, fibreglass and soft stone. The highly concentric cutters allow gentle, efficient and controlled...
€29.90
incl. VAT plus shipping costs
Article No. 711149
Typhoon Carbide Rotary Rasp Cutters, Fine
Cutter bits with edge-retaining metal needles of tungsten carbide for modelling and smoothing softwood and hardwood, rubber, plastics, fibreglass and soft stone. The highly concentric cutters allow gentle, efficient and controlled...
€32.80
incl. VAT plus shipping costs
Article No. 711151
Burnmaster Extra Pen
This Burnmaster pen is also suitable for woodburners and tips from other manufacturers. The ergonomic profile of the handpiece allows a constant, self-adjusting working position. Comes with adapter for woodburning stations from other...
€53.90
incl. VAT plus shipping costs
Article No. 715304
Burnmaster Wire
Used with contact tips No. 715305 , the wire allows you to make your own tips. Wire length 460 mm.
€15.90
incl. VAT plus shipping costs
Article No. 715306
King Arthur's Tools Galahad CG Discs
Versatile tungsten carbide disc for hobbyists. For shaping wood parts, cutting bevels, curves or hollowing. Also ideal for trueing and smoothing uneven surfaces. The rasp discs feature patented durable and sharp tungsten carbide grits...
€59.00
incl. VAT plus shipping costs
Article No. 715346
Replacement Cutters for Arbortech Mini-Turbo and TurboShaft
Fits Arbortech Mini-Turbo No. 715284 , Arbortech TurboShaft No. 715262 and Arbortech Mini Pro No. 728983 .
€26.90
incl. VAT plus shipping costs
Article No. 715261
King Arthur's Tools Carbide Abrasive Disc, Flat Face
This flat disc is only 3 mm thick and is used to mill fine grooves, make fine cuts, letterings and decorative grooves, e.g. on turning items. The small rasp disc allows for fast and effective removal of material, creating fine surfaces...
€53.20
incl. VAT plus shipping costs
Article No. 715354
King Arthur's Tools Carbide Abrasive Disc, Flat Profile
The small rasp disc allows for the fast and effective removal of material, creating fine surfaces when working along or across the grain as well as on end grain. For concave or convex shapes, profiles or deep hollows and vessels.
€47.80
incl. VAT plus shipping costs
Article No. 715353
King Arthur's Tools Holey Galahad Carbide Disc Round
Windows in the disc allow you to see the workpiece surface behind the disc while youre working, making work easier and allowing constant control of the surface quality and shape of the workpiece. From bowls to sculptures to log cabins...
€99.90
incl. VAT plus shipping costs
Article No. 715345
King Arthur's Tools Holey Galahad Carbide Disc, Flat
Holes in the disc allow you to see the workpiece surface behind the disc while you are working, making work easier and allowing constant control of the surface quality and shape of the workpiece. From bowls to sculptures to log cabins...
€99.90
incl. VAT plus shipping costs
Article No. 715344
King Arthur's Tools Merlin2 Surface Set, Nick Agar Signature...
The perfect selection of abrasive, grinding, and polishing discs for turners, wood sculptors, metalworkers, model makers, and surface technicians. The comprehensive accessory set enlarges the areas in which long neck angle grinder...
€369.00
€319.00
incl. VAT plus shipping costs
Article No. 715381
King Arthur's Tools Merlin2 Flat Carbide Abrasive Disc Sets
The flat abrasive disc is studded with sharp tungsten carbide teeth on the front, the edge, and on the back. They guarantee effortless material removal, even against the grain. The disc cuts in all directions and facilitates the milling...
€59.90
incl. VAT plus shipping costs
Article No. 715386
Merlin2 Quick-change Backing Pad Ø 50 mm
For screwing on polishing pads, bristle discs, or sanding discs with a quick-change attachment. The practical quick-change mechanism allows the tools to be switched rapidly. Made of robust rubber with an aluminium core. With hexagonal...
€34.80
incl. VAT plus shipping costs
Article No. 715371
Merlin2 Cleaning Discs 3 Pieces
Removes all coats of paint and light oxidation residue. For use with a wide range of metal surfaces. Fits quick-change backing pad No. 715371 .
€8.40
€6.90
incl. VAT plus shipping costs
Article No. 715373
Merlin2 Soft Pad
For use on the Merlin2 quick-change backing pad No. 715371 . Fits all Ø 50-56 mm Velcro grinding discs.
€24.70
incl. VAT plus shipping costs
Article No. 715378