Riveting Hammer, Upper Part, 50 x 50 mm, Ash Handle
Straight riveting hammer for forging attachments such as knife tangs. The riveting hammer enables very precise work. Depending on the shape of the riveting hammer face and its lower part, different workpiece shapes can be achieved....
€89.00
incl. VAT plus shipping costs
Article No. 745236
Planishing Hammer, Upper Part, 70 x 70 mm, Ash Handle
In blacksmithing or art forging, the original rough shape of the workpiece is often subsequently reworked in a red-hot state to eliminate unwanted structural irregularities. The planishing hammer is used to smooth the forged surfaces and...
€89.90
incl. VAT plus shipping costs
Article No. 745234
Blacksmith's Tong, Flat Jaws
Blacksmith's tong with flat jaws for flat workpieces. Forged from C-35 or C-45 carbon steel Black paint prevents corrosion Long shanks allow for high leverage Lap-joint ensures the stable connection of both shanks
€19.90
incl. VAT plus shipping costs
Article No. 727845
Pick Up Tongs
Blacksmith's tong with curved flat jaws. Forged from C-35 or C-45 carbon steel Black paint prevents corrosion Long shanks allow for high leverage Lap-joint ensures the stable connection of both shanks
€20.90
incl. VAT plus shipping costs
Article No. 727846
Stahlamboss mit zwei Hörnern, norddeutsche Form
Forging anvil made of alloyed tool steel, with two horns, hardened, ground face and pritchel hole. Hardy hole serves as holder for anvil tools.
€864.00
incl. VAT plus shipping costs
Article No. 714214
Schmiedeamboss mit zwei Hörnern, süddeutsche Form, mit Voramboss
Anvil made of high quality tool steel, with two tapering horns, hardened, ground face and pritchel hole. Hardy hole serves as holder for anvil tools. Also suitable for shoeing and for use in schools.
€1,099.00
incl. VAT plus shipping costs
Article No. 714216
Schmiedeamboss mit zwei Hörnern, süddeutsche Form, ohne Voramboss
Anvil made of high quality tool steel, with two tapering horns, hardened, ground face and pritchel hole. Hardy hole serves as holder for anvil tools. Also suitable for shoeing and for use in schools.
€945.00
incl. VAT plus shipping costs
Article No. 714219
Anvil Hardy
The hardy is used to remove excess material from the red-hot workpiece. For use with a standard anvil with square hardy hole 25 x 25 mm. Edge width: 50 mm; Total height: 150 mm.
€49.90
incl. VAT plus shipping costs
Article No. 745233
Anvil Horn
Anvil horn for use with a standard anvil with square hardy hole 25 x 25 mm. The anvil horn is used to make eyelets, eyes, rings, bends and various flourishes. Diameter at the bottom of the horn: 50 mm; Height of the conical horn: 150 mm;...
€49.90
incl. VAT plus shipping costs
Article No. 745232
Planishing Hammer, Lower Part, 70 x 70 mm
In blacksmithing or art forging, the original rough shape of the workpiece is often subsequently reworked in a red-hot state to eliminate unwanted structural irregularities. The planishing hammer is used to smooth the forged surfaces and...
€69.90
incl. VAT plus shipping costs
Article No. 745235
Riveting Hammer, Lower Part, 50 x 50 mm
Straight anvil insert for forging attachments such as knife tangs. The lower part of the riveting hammer enables very precise work. Depending on the shape of the riveting hammer surface, different workpiece shapes can be achieved. The...
€59.00
incl. VAT plus shipping costs
Article No. 745237
Pen Splitter for Sorby Peter Child Pyrography Tool
The splitter saves time and allows a quick and safe change between the holders. Parallel heating of two holders, which can be easily and conveniently placed in the integrated supports and switched on and off separately, allowing two...
€45.30
€39.00
incl. VAT plus shipping costs
Article No. 701734