Power Tools and Accessories

Festool Cordless mobile dust extractor CLEANTEC CTMC MIDI I-Plus

Festool Cordless mobile dust extractor CLEANTEC CTMC MIDI I-Plus

Goodbye dust. And hello good health - even without an electrical outlet module. The CTLC MIDI cordless compact dust extractor loves dust and is perfectly coordinated to your Festool cordless tools. Whether for mobile sawing, sanding or...
€1,199.00 €1,099.00

incl. VAT plus shipping costs

Article No. 721344

Festool Akku-Deltaschleifer DTSC 400 3,1 I-Plus

Festool Akku-Deltaschleifer DTSC 400 3,1 I-Plus

Für einzigartige Mobilität und Bewegungsfreiheit beim Arbeiten sorgen die neuen Akku-Kompaktschleifer RTSC 400, DTSC 400, ETSC 125. Der starke 18 V Bluetooth Ergo-Akkupack mit 3,1 Ah garantiert Leistung wie aus der Steckdose. Und ist der...
€557.00 €539.00

incl. VAT plus shipping costs

Article No. 729790

Festool Compressed air eccentric sander LEX 3 150/7

Festool Compressed air eccentric sander LEX 3 150/7

Stops vibrations, increases efficiency. With a 7 mm sanding stroke, the LEX 3 150/7 compressed air eccentric sander guarantees high material removal in a very short space of time, e.g. when coarse sanding flat surfaces and repair...
€629.00 €609.00

incl. VAT plus shipping costs

Article No. 729368

DICTUM HW Cutter Bit TiAlN, Shank Ø 8 mm, Taper Radius End, 10 x 20 mm

DICTUM HW Cutter Bit TiAlN, Shank Ø 6 mm

The cutter is suitable for processing wood, plastics, aluminium, brass, copper, zinc, etc. It allows freehand milling of narrow contours and details and is therefore also ideal for sculptural work with e.g. flexible shafts. In metal...
variants
€24.90 €19.90

incl. VAT plus shipping costs

Article No. 704496

DICTUM HW Cutter Bit TiAlN, Shank Ø 8 mm, Pointed Cone, 10 x 20 mm

DICTUM HW Cutter Bit TiAlN, Shank Ø 6 mm

The cutter is suitable for processing wood, plastics, aluminium, brass, copper, zinc, etc. It allows freehand milling of narrow contours and details and is therefore also ideal for sculptural work with e.g. flexible shafts. In metal...
variants
€32.90 €25.90

incl. VAT plus shipping costs

Article No. 704497

UJK Locking C Clamp, 75 mm

UJK Locking C Clamps

The one-handed operation leaves the second hand free, e.g. to position the workpiece. The contact pressure can be adjusted by a knurled screw. Two large, movable pressure plates (Ø 45 mm) spread the clamp pressure evenly, therefore it is...
€37.90 €32.90

incl. VAT plus shipping costs

Article No. 720959

T-Track Set with Workpiece Clamps, 380 mm

T-Track Set with Workpiece Clamps

Set of 2 T-tracks with matching rail ferrules (2 pieces). Ideal for mounting fixtures, e.g. clamping and routing jigs. The shallow rail cross-section permits mounting even in weak sheet material. Maximum clamping height 50 mm, radius 16...
variants
€42.50 €35.90

incl. VAT plus shipping costs

Article No. 727360

T-Track Set with Workpiece Clamps, 760 mm

T-Track Set with Workpiece Clamps

Set of 2 T-tracks with matching rail ferrules (2 pieces). Ideal for mounting fixtures, e.g. clamping and routing jigs. The shallow rail cross-section permits mounting even in weak sheet material. Maximum clamping height 50 mm, radius 16...
variants
€49.50 €41.90

incl. VAT plus shipping costs

Article No. 727361

Festool Sanding disc STF DELTA/7 P120 GR/100 Granat, 100 Pieces

Festool Sanding disc STF DELTA/7 P120 GR/100 Granat

Main areas of application: Processing modern paint systems. Recommended for VOC clear coats. Processing hard sublayers. Processing plastics, mineral materials, acrylic, repair compounds, fillers
variants
€45.90 €39.90

incl. VAT plus shipping costs

Article No. 720197

Festool Sanding disc STF DELTA/7 P240 GR/100 Granat, 100 Pieces

Festool Sanding disc STF DELTA/7 P240 GR/100 Granat

Main areas of application: Processing modern paint systems. Recommended for VOC clear coats. Processing hard sublayers. Processing plastics, mineral materials, acrylic, repair compounds, fillers
variants
€45.90 €39.90

incl. VAT plus shipping costs

Article No. 720199

Festool Compound mitre saw SYMMETRIC SYM 70 RE

Festool Compound mitre saw SYMMETRIC SYM 70 RE

Measure the angle, calculate the bisecting angle, carefully adjust the cutting angle on the cross-cut saw and begin sawing: a laborious task indeed. Not with the SYMMETRIC by Festool, however. All kinds of strip material can now be cut...
€995.00 €899.00

incl. VAT plus shipping costs

Article No. 706859

Festool Sanding disc STF DELTA/7 P120 GR/10 Granat, 10 Pieces

Festool Sanding disc STF DELTA/7 P120 GR/10 Granat

Main areas of application: Processing modern paint systems. Recommended for VOC clear coats. Processing hard sublayers. Processing plastics, mineral materials, acrylic, repair compounds, fillers
€7.70 €6.00

incl. VAT plus shipping costs

Article No. 706889

Festool Special saw blade 210x2,4x30 TF60

Festool Special saw blade 210x2,4x30 TF60

Main areas of application: For work on laminate flooring and compound materials
variants
€141.10 €129.00

incl. VAT plus shipping costs

Article No. 706631

Festool Flute cutter HW S8 D25,5/R6,35 KL

Festool Flute cutter HW S8 D25,5/R6,35 KL

Main areas of application: For every flute cutter, Festool offers a roundover cutter with the same radius (except for R 20). Flute cutters and radius routers can be ideally combined, e.g., for profiles and counter profiles
variants
€48.20 €44.90

incl. VAT plus shipping costs

Article No. 706684

Systainer T-LOC, Light Grey

Systainer T-LOC, Light Grey

The T-LOC system is extremely easy to handle, provides ingenious functionality and is compatible with the proven Systainer Classic Line. The T-LOC can be operated with one hand, which saves time and makes the craftsman’s life so much...
€79.90 €67.90

incl. VAT plus shipping costs

Article No. 718815