Festool Compressed air eccentric sander LEX 3 150/7
Stops vibrations, increases efficiency. With a 7 mm sanding stroke, the LEX 3 150/7 compressed air eccentric sander guarantees high material removal in a very short space of time, e.g. when coarse sanding flat surfaces and repair...
€629.00
€609.00
incl. VAT plus shipping costs
Article No. 729368
DICTUM HW Cutter Bit TiAlN, Shank Ø 6 mm
The cutter is suitable for processing wood, plastics, aluminium, brass, copper, zinc, etc. It allows freehand milling of narrow contours and details and is therefore also ideal for sculptural work with e.g. flexible shafts. In metal...
€32.90
€25.90
incl. VAT plus shipping costs
Article No. 704497
T-Track Set with Workpiece Clamps
Set of 2 T-tracks with matching rail ferrules (2 pieces). Ideal for mounting fixtures, e.g. clamping and routing jigs. The shallow rail cross-section permits mounting even in weak sheet material. Maximum clamping height 50 mm, radius 16...
€42.50
€35.90
incl. VAT plus shipping costs
Article No. 727360
T-Track Set with Workpiece Clamps
Set of 2 T-tracks with matching rail ferrules (2 pieces). Ideal for mounting fixtures, e.g. clamping and routing jigs. The shallow rail cross-section permits mounting even in weak sheet material. Maximum clamping height 50 mm, radius 16...
€49.50
€41.90
incl. VAT plus shipping costs
Article No. 727361
Festool Sanding disc STF DELTA/7 P120 GR/100 Granat
Main areas of application: Processing modern paint systems. Recommended for VOC clear coats. Processing hard sublayers. Processing plastics, mineral materials, acrylic, repair compounds, fillers
€45.90
€39.90
incl. VAT plus shipping costs
Article No. 720197
Festool Sanding disc STF DELTA/7 P240 GR/100 Granat
Main areas of application: Processing modern paint systems. Recommended for VOC clear coats. Processing hard sublayers. Processing plastics, mineral materials, acrylic, repair compounds, fillers
€45.90
€39.90
incl. VAT plus shipping costs
Article No. 720199
Festool Compound mitre saw SYMMETRIC SYM 70 RE
Measure the angle, calculate the bisecting angle, carefully adjust the cutting angle on the cross-cut saw and begin sawing: a laborious task indeed. Not with the SYMMETRIC by Festool, however. All kinds of strip material can now be cut...
€995.00
€899.00
incl. VAT plus shipping costs
Article No. 706859
Festool Sanding disc STF DELTA/7 P120 GR/10 Granat
Main areas of application: Processing modern paint systems. Recommended for VOC clear coats. Processing hard sublayers. Processing plastics, mineral materials, acrylic, repair compounds, fillers
€7.70
€6.00
incl. VAT plus shipping costs
Article No. 706889
Festool Special saw blade 210x2,4x30 TF60
Main areas of application: For work on laminate flooring and compound materials
€141.10
€129.00
incl. VAT plus shipping costs
Article No. 706631
Festool Pendulum Jigsaw CARVEX PS 420 EBQ-Plus
The CARVEX PS 420 is a lightweight, handy assembly jigsaw with a powerful pulling force and unrivalled profile-cutting capacity. Your benefits: Excellent behaviour in curves thanks to threefold saw blade guide and rigid lifter rod...
€479.00
€449.00
incl. VAT plus shipping costs
Article No. 706636
Festool Flute cutter HW S8 D25,5/R6,35 KL
Main areas of application: For every flute cutter, Festool offers a roundover cutter with the same radius (except for R 20). Flute cutters and radius routers can be ideally combined, e.g., for profiles and counter profiles
€48.20
€44.90
incl. VAT plus shipping costs
Article No. 706684
UJK Pocket Hole Clamp
Especially developed for the UJK Pocket Hole Jig, this clamp exactly aligns the pocket joint for screwing. The pin is put into one of the drilled pocket holes and clamped. Once the joint is aligned, further drilled pocket holes can be...
€49.00
€43.90
incl. VAT plus shipping costs
Article No. 704132