Tormek T-8 Original

Free workshop voucher included!

»Tormek Original« sharpening wheel (SG-250), aluminium oxide, Ø 250 x 50 mm, grit 220; leather...
TORMEK T-8 Original takes precision and stability to a completely new level. The new design integrates the previously mounted sleeves for the vertical and horizontal support into the revolutionary fully cast top and frame. The enhanced stability optimizes jig guidance and thus the sharpening accuracy.
»Tormek Original« sharpening wheel (SG-250), aluminium oxide, Ø 250 x 50 mm, grit 220; leather honing wheel, Ø 215 x 30 mm; universal support, finely adjustable (can be used horizontally or vertically). 230 V, 200 W, 90 rpm, torque 14.7 Nm, 14.8 kg.
Includes:
  • Square Edge Jig (SE-77)
  • Adjustable Trueing Tool (TT-50)
  • Stone Grader (SP-650)
  • Pro Angle Master (WM-200)
  • Honing Compound (PA-70)
  • Handbook (HB-10)
  • Edge Marker (EM-15)
  • Voucher for free participation in a one-day workshop of your choice or a discount of €100 for a multi-day workshop.
Comes with Tormek manual in German language.
Tormek Sharpening System
Proven for many years and constantly perfected wet working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.
The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The offset front end can also be used for flat honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and lowerable water container.
A summary of the advantages of Tormek sharpening machines
Longer working life of T-8 and T-4 Original:
  • Stainless steel spindle with EzyLock-System for easier stone assembling
  • Solid zinc cast housing with integrated vertical and horizontal support
  • Better motor insulation

Additional advantages of T-8 Original:
  • Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection
  • Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life
  • Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper
     
    more
    less
    Further details on the manufacturer
     
    Exklusively at DICTUM: If you buy a Tormek T-8 or T-4 from DICTUM, you can choose between a voucher for free participation in a one-day workshop of your choice or a discount of 100 € for a multi-day workshop. The voucher amount cannot be set off against the purchase of products.
     
    Article no. 716034
    Brand Tormek
    Ready to ship, delivery time 3-4 workdays within Germany
    €759.00 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Type Price Quantity
    Tormek T-8 Original
    Tormek T-8 Original

    Article number 716034
      €759.00
     
    Plenty of accessories and spare parts

    Accessories

    Tormek Pro Angle Master WM-200

    Tormek Pro Angle Master WM-200

    For setting the grinding angle and checking the bevel geometry. Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.
    €28.50

    incl. VAT plus shipping costs

    Article No. 705240

    Tormek Square Edge Jig SE-77

    Tormek Square Edge Jig SE-77

    For plane blades and paring chisels. Also suitable for Japanese chisels. Slightly convex cutting shapes can also be sharpened using two setting wheels (included with T-8).
    €69.90

    incl. VAT plus shipping costs

    Article No. 716035

    Tormek Diamond Grinding Wheel DE-250, Grit 1200

    Tormek Diamond Grinding Wheel DE-250, Grit 1200

    Diamond grinding wheel for a very fine finish. Ideal for carving gouges and knives. Incl. Tormek ACC-150 Anti-corrosion Concentrate (150 ml, No. 716077 ). It is advisable to use diamond grinding wheels for wet grinding only as this...
    €284.00

    incl. VAT plus shipping costs

    Article No. 716078

    Tormek Diamond Grinding Wheel DF-250, Grit 600

    Tormek Diamond Grinding Wheel DF-250, Grit 600

    Universal diamond grinding wheel, combines effective material removal and fine finish. Ideal for chisels and plane blades. Incl. Tormek ACC-150 Anti-corrosion Concentrate (150 ml, No. 716077 ). It is advisable to use diamond grinding...
    €284.00

    incl. VAT plus shipping costs

    Article No. 716079

    Tormek Diamond Grinding Wheel DC-250, Grit 360

    Tormek Diamond Grinding Wheel DC-250, Grit 360

    Diamond grinding wheel for quick and effective material removal, ideal for pre-grinding dull blades or repairing blades with nicks. Incl. Tormek ACC-150 anti-corrosion concentrate (150 ml, No. 716077 ). It is advisable to use diamond...
    €294.00

    incl. VAT plus shipping costs

    Article No. 716080

    Tormek Anti-corrosion Concentrate ACC-150

    Tormek Anti-corrosion Concentrate ACC-150

    For cleaning diamond grinding wheels and protecting them against corrosion if not used for a long time. 2 x 150 ml.
    €39.60

    (Content: €132.00 / 1 litre)

    incl. VAT plus shipping costs

    Article No. 716077

    Tormek Axe Jig SVA-170

    Tormek Axe Jig SVA-170

    For axe heads up to 170 mm in size (larger axes can be sharpened without a jig using the universal support).
    €16.40

    incl. VAT plus shipping costs

    Article No. 705228

    Tormek Handbook »Water Cooled Sharpening of Edge Tools« (HB 10)

    Tormek Handbook »Water Cooled Sharpening of Edge Tools« (HB 10)

    By Torgny Jansson. General introduction to the basics of sharpening and detailed instructions for use of the Tormek.
    €28.50

    incl. VAT plus shipping costs

    Article No. 705199

    DICTUM »Carbon Cut« Grinding Wheel, Grit 80

    DICTUM »Carbon Cut« Grinding Wheel, Grit 80

    Extra-coarse wheel with hard bond for repairing damaged tool blades. Primarily suitable for double-layered blades and carbon steel. Aluminium oxide abrasive.
     
    €129.00

    incl. VAT plus shipping costs

    Article No. 716030

    Tormek Universal Support, Extended US-430

    Tormek Universal Support, Extended US-430

    Extended Universal Support for sharpening long tools, such as knives or machetes. Micro adjust with scale for precise setting. Suitable for Tormek T-8, T-7, T-4 and older series models.
    €74.00

    incl. VAT plus shipping costs

    Article No. 716058

    Tormek Case TC-800

    Tormek Case TC-800

    The Tormek Case keeps your devices and accessories neatly stored, stackable and easy to carry thanks to the premium leather handle. Fits inserts HTK-00 (No. 716191 ), TNT-00 (No. 716192 ) and T8-00 (No. 716193 ).
    €58.90

    incl. VAT plus shipping costs

    Article No. 716190

    Tormek Insert for Hand Tool Kit HTK-806

    Tormek Insert for Hand Tool Kit HTK-806

    The HTK-00 insert can be used to store all the devices included in the Hand Tool Kit (No. 705223 ). Suitable for Tormek Case TC-800 (No. 716190 ) and Tormek Sharpening Station T-740 (No. 705233 ).
    €25.20

    incl. VAT plus shipping costs

    Article No. 716191

    Tormek Insert for Woodturner's Kit TNT-808

    Tormek Insert for Woodturner's Kit TNT-808

    The TNT-00 insert can be used to store all the devices included in the Woodturner's Kit (No. 705454 ). Suitable for Tormek Case TC-800 (No. 716190 ) and Tormek Sharpening Station T-740 (No. 705233 ).
    €25.20

    incl. VAT plus shipping costs

    Article No. 716192

    Tormek Insert for T-8 Original Accessories T8-00

    Tormek Insert for T-8 Original Accessories T8-00

    The T8-00 insert can be used to store all the devices of the Tormek T-8 Original (No. 716034 ). Suitable for Tormek Case TC-800 (No. 716190 ) and Tormek Sharpening Station T-740 (No. 705233 ).
    €23.30

    incl. VAT plus shipping costs

    Article No. 716193

    Tormek CW-220 Composite Honing Wheel

    Tormek CW-220 Composite Honing Wheel

    The composite honing wheel has an integrated polishing agent and is easy to handle. An advantage over the leather honing wheel is that the composite wheel can be used in clean environments and no honing paste has to be applied.
    €84.00

    incl. VAT plus shipping costs

    Article No. 716194

    DICTUM »Black Crystal« CBN Grinding Wheel, Ø 250 mm, Circumfer. Coating, B54

    DICTUM »Black Crystal« CBN Grinding Wheel, Ø 250 mm,...

    This CBN grinding wheel has been specifically designed for use on wet grinding machines such as the Tormek T-7/T-8. The CBN-coated, precisely balanced aluminium body allows grinding without water or coolant. This saves time and keeps the...
    variants
     
    €299.00

    Article No. 715417

    DICTUM »Black Crystal« CBN Grinding Wheel, Ø 250 mm, One Side Coated

    DICTUM »Black Crystal« CBN Grinding Wheel, Ø 250 mm, One Side...

    This CBN grinding wheel has been specifically designed for use on wet grinding machines such as the Tormek T-7/T-8. The CBN-coated, precisely balanced aluminium body allows grinding without water or coolant. This saves time and keeps the...
    variants
     
    €325.00

    Article No. 715419

    DICTUM »Ultra-Speed« Grinding Wheel, Grit 3000

    DICTUM »Ultra-Speed« Grinding Wheels

    For grinding double-layered blades as well as chrome/vanadium steels and HSS. Hard bond. Aluminium oxide abrasive.
    variants
     
    €279.00

    incl. VAT plus shipping costs

    Article No. 727850

    DICTUM »Black Carbide« Grinding Wheel, Grit 220

    DICTUM »Black Carbide« Grinding Wheel, Grit 220

    Black silicon carbide is particularly suitable for hard materials such as HSS but also for carbon steels. Especially woodturners appreciate the fast stock removal and the long lifetime of the abrasive. Black silicon carbide abrasive.
     
    €197.00

    incl. VAT plus shipping costs

    Article No. 727848

    DICTUM CBN Black Crystal Grinding Wheel, Ø 250 mm, Both Sides Coated, B46

    DICTUM CBN Black Crystal Grinding Wheel, Ø 250 mm, Both Sides...

    This CBN grinding wheel has been specifically designed for use on wet grinding machines such as the Tormek T-7/T-8. The CBN-coated, precisely balanced aluminium body allows grinding without water or coolant. This saves time and keeps the...
    variants
     
    €335.00

    Article No. 715420

    DICTUM CBN Black Crystal Grinding Wheel, Ø 250 mm, Both Sides Coated, B54

    DICTUM CBN Black Crystal Grinding Wheel, Ø 250 mm, Both Sides...

    This CBN grinding wheel has been specifically designed for use on wet grinding machines such as the Tormek T-7/T-8. The CBN-coated, precisely balanced aluminium body allows grinding without water or coolant. This saves time and keeps the...
    variants
     
    €335.00

    Article No. 715421

    DICTUM »Ultra-Speed« Grinding Wheel, Grit 1000

    DICTUM »Ultra-Speed« Grinding Wheels

    For grinding double-layered blades as well as chrome/vanadium steels and HSS. Hard bond. Aluminium oxide abrasive.
    variants
     
    €229.00

    incl. VAT plus shipping costs

    Article No. 727849

    DICTUM »Ultra-Speed« Grinding Wheel, Grit 220

    DICTUM »Ultra-Speed« Grinding Wheels

    For grinding double-layered blades as well as chrome/vanadium steels and HSS. Hard bond. Aluminium oxide abrasive.
    variants
     
    €164.00

    incl. VAT plus shipping costs

    Article No. 727847

    Tormek Planer Blade Jig SVH-320

    Tormek Planer Blade Jig SVH-320

    For blades of any length, minimum blade width 13 mm.
    €179.00

    incl. VAT plus shipping costs

    Article No. 705207

    Tormek Rotating Base

    Tormek Rotating Base

    Enables you to easily rotate the machine 180° and lock it with complete stability. It makes it easy to alternate between sharpening/honing or sharpening towards or away from the edge. Fits all models.
    €49.40

    incl. VAT plus shipping costs

    Article No. 705221

    Tormek Tool Rest SVD-110

    Tormek Tool Rest SVD-110

    For turning tools (scrapers, scorps, inshaves), chisels, scraper blades etc. »Torlock« locking system.
    €34.10

    incl. VAT plus shipping costs

    Article No. 705218

    Tormek Rubber Work Mat RM-533

    Tormek Rubber Work Mat RM-533

    This waterproof yet non-slip rubber mat is ideal as a workpad for sharpening machines as well as for sharpening by hand using waterstones. The raised rim and all-round groove will retain any water spillage. The relatively soft material...
    €50.50

    incl. VAT plus shipping costs

    Article No. 705198

    Tormek Hand Tool Kit HTK-806

    Tormek Hand Tool Kit HTK-806

    Includes: Short Tool Jig (SVS-38) Axe Jig (SVA-170) Knife Jig (KJ-45) Small Knife Holder (SVM-00) Knife Jig (KJ-140) Scissors Jig (SVX-150) Comes in practical plastic box with hard foam inlay (HTK-00).
    €203.00

    incl. VAT plus shipping costs

    Article No. 705223

    Tormek Moulding Knife Jig SVP-80

    Tormek Moulding Knife Jig SVP-80

    Sharpens all makes and shapes of profile knifes. Also for profiled paint removal blades suitable for Tormek T-8, T-7, T-4, T-3 and old series models. For profile knifes with 24, 30 or 38 mm distance between guide holes. Not suitable for...
    €172.30

    incl. VAT plus shipping costs

    Article No. 705238

    Tormek Drill Bit Sharpening Attachment DBS-22

    Tormek Drill Bit Sharpening Attachment DBS-22

    Sharpening the complex tip geometry of a drill by hand requires plenty of practice. Using the Tormek drill bit sharpener attachment, you can now sharpen a 4-facet drill bit with the usual wet working sharpening method on your drill for...
    €224.00

    incl. VAT plus shipping costs

    Article No. 705231

    Tormek Woodturner's Kit TNT-808

    Tormek Woodturner's Kit TNT-808

    Includes: Gouge Jig (SVD-186 R) Multi Jig (SVS-50) Tool Rest (SVD-110) Profiled Leather Honing Wheel (LA-120) Turning Tool Setter (TTS-100) Dust Cover for Tormek Sharpening System (MH-380) Instruction box for woodturners (in...
    €319.00

    incl. VAT plus shipping costs

    Article No. 705454

    Tormek Stone Grader SP-650

    Tormek Stone Grader SP-650

    For regrading and dressing Tormek sharpening stones.
    €27.50

    incl. VAT plus shipping costs

    Article No. 705209

    Tormek Handbook »Nass-Schärfen von Schneidwerkzeugen« (HB 10)

    Tormek Handbook »Nass-Schärfen von Schneidwerkzeugen« (HB 10)

    By Torgny Jansson. General introduction to the basics of sharpening and detailed instructions for use of the Tormek (every machine comes with handbook).
    €28.50

    incl. VAT plus shipping costs

    Article No. 705211

    Tormek Replacement Honing Compound PA-70

    Tormek Replacement Honing Compound PA-70

    The honing paste is used with leather honing wheels. Thanks to the unique properties of the leather combined with the honing paste, the burr is effectively removed without damaging the cutting edge. At the same time, the bevel is finely...
    €10.90

    (Content: €155.71 / 1 kg)

    incl. VAT plus shipping costs

    Article No. 705213

    Tormek Universal Support US-105 for T-7

    Tormek Universal Support US-105 for T-7

    With fine adjustment suitable for Tormek T-7, T-8 and old series models.
    €40.60

    incl. VAT plus shipping costs

    Article No. 705206

    Tormek Small Knife Holder SVM-00

    Tormek Small Knife Holder SVM-00

    Enables you to sharpen even the smallest knives like wood carving knives and pocket knives. Used in combination with the Tormek Knife Jig SVM-45.
    €35.00

    incl. VAT plus shipping costs

    Article No. 705232

    Tormek Short Tool Jig SVS-38

    Tormek Short Tool Jig SVS-38

    For short gouges and V-blades. Blade length min. 45 mm, blade width max. 38 mm.
    €23.80

    incl. VAT plus shipping costs

    Article No. 705239

    Tormek Profiled Leather Honing Wheel LA-120

    Tormek Profiled Leather Honing Wheel LA-120

    For honing and polishing the inside of turning tools, gouges and V-shaped tools, interchangeable wheels.
    €55.10

    incl. VAT plus shipping costs

    Article No. 705227

    variants
    €43.80

    incl. VAT plus shipping costs

    Article No. 705203

    Dust Cover for Tormek Sharpening System MH-380

    Dust Cover for Tormek Sharpening System MH-380

    Linen, suitable for Tormek T-7 and T-8.
    €24.50

    incl. VAT plus shipping costs

    Article No. 705215

    Tormek Sharpening Station (TS-740)

    Tormek Sharpening Station (TS-740)

    This robust sharpening station offers not just a sharpening table but also storage space for the Tormek sharpening jigs and accessories. You can adjust the working height to fit your exact size. This allows full control over sharpening,...
    €779.00

    incl. VAT plus shipping costs

    Article No. 705233

    Tormek Bench Grinder Mounting Set BGM-100

    Tormek Bench Grinder Mounting Set BGM-100

    Though primarily designed for turners, this mounting set, in combination with the gouge jig (SVD-186 R), the multi jig (SVS-50) and the tool rest (SVD-110), allows you to sharpen all turning tools with the Tormek system also on a...
    €85.60

    incl. VAT plus shipping costs

    Article No. 705225

    Tormek Horizontal Base XB-100

    Tormek Horizontal Base XB-100

    For Tormek T-7 and T-3.
    €28.50

    incl. VAT plus shipping costs

    Article No. 705226

    Tormek Turning Tool Setter TTS-100

    Tormek Turning Tool Setter TTS-100

    For adjusting bevel angles of turning tools and chisels, independently of wheel diameter. Used in combination with jigs (SVD-186 R and SVS-50).
    €27.40

    incl. VAT plus shipping costs

    Article No. 705237

    Tormek Adjustable Trueing Tool TT-50

    Tormek Adjustable Trueing Tool TT-50

    With diamond tip, for trueing ingrained or unround grinding wheels.
    €79.30

    incl. VAT plus shipping costs

    Article No. 705210

    Tormek Scissors Jig SVX-150

    Tormek Scissors Jig SVX-150

    For all straight scissors' blades. Demountable hedge shears up to max. 200 mm. Blade thickness max. 9 mm
    €49.50

    incl. VAT plus shipping costs

    Article No. 705205

    Tormek Multi Jig SVS-50

    Tormek Multi Jig SVS-50

    Universal jig for turning tools and carving gouges with straight and curved cutting edges and for skew and straight chisels.
    €54.00

    incl. VAT plus shipping costs

    Article No. 705229

    Tormek Converter OWC-1

    Tormek Converter OWC-1

    Attachment to adapt the Tormek bench grinder mounting kit BGM-100 (No. 705225 ) directly to a Wolverine V-arm. It allows to use any Tormek honing guide on double-wheeled grinders with the Wolverine system.
    €16.10

    incl. VAT plus shipping costs

    Article No. 705353

    Tormek Gouge Jig SVD-186 R

    Tormek Gouge Jig SVD-186 R

    For turning tools and hollow gouges, as well as interchangeable cutters for hollowing tools etc., up to 36 mm wide. Adjustable in cutting angle and shape.
    €89.90

    incl. VAT plus shipping costs

    Article No. 716033

     

    Replacement parts

    DICTUM »Carbon Cut« Grinding Wheel, Grit 80

    DICTUM »Carbon Cut« Grinding Wheel, Grit 80

    Extra-coarse wheel with hard bond for repairing damaged tool blades. Primarily suitable for double-layered blades and carbon steel. Aluminium oxide abrasive.
     
    €129.00

    incl. VAT plus shipping costs

    Article No. 716030

    Plastic bearing

    Plastic bearing

    Fits No. 705228 , 705236 and 705247 .
    €3.20

    incl. VAT plus shipping costs

    Article No. 800012

    Tormek Settling Disc

    Tormek Settling Disc

    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €4.20

    incl. VAT plus shipping costs

    Article No. 800035

    variants
    €65.30

    incl. VAT plus shipping costs

    Article No. 705212

    Button Switch for Tormek

    Button Switch for Tormek

    The switch is available in two types - depending on the year the machine was built, as a toggle switch or a button switch. Check whether a toggle switch no. 800046 or a button switch no. 8000504 is installed on your machine. You must...
    €49.40

    incl. VAT plus shipping costs

    Article No. 800504

    Tormek Original Replacement Grinding Wheel SG-250, Grit 220

    Tormek Original Replacement Grinding Wheel SG-250, Grit 220

    This hard-bond stone is suitable for pre-sharpening double-layered blades as well as chrome-vanadium steel and HSS.
    €169.00

    incl. VAT plus shipping costs

    Article No. 705201

    Tormek Main Shaft Set MSK-250

    Tormek Main Shaft Set MSK-250

    For easier fitting of the grinding stones the main shaft is now supplied with a left-hand thread. The new EzyLock nut can be tightened by hand and securely clamps the stone. Set consists of main shaft with left-hand thread, EzyLock nut,...
    variants
    €46.40

    incl. VAT plus shipping costs

    Article No. 800500

    Tormek Knurled Screw Sharpening Wheel

    Tormek Knurled Screw Sharpening Wheel

    Suitable for Tormek T-7, T-8 and old series models.
    €21.70

    incl. VAT plus shipping costs

    Article No. 800038

    Knurled Nut for Tormek

    Knurled Nut for Tormek

    Fits Tormek T-3, T-4, T-7 and T-8.
    €14.50

    incl. VAT plus shipping costs

    Article No. 800343

    Tormek Eyelet for Cover No. 800040

    Tormek Eyelet for Cover No. 800040

    Suitable for Tormek T-3, T-4, T-7 and old series models.
    €7.40

    incl. VAT plus shipping costs

    Article No. 800042

    Tormek Diamond Tip ADV D 50

    Tormek Diamond Tip ADV D 50

    For the diamond stone dresser. Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.
    €40.60

    incl. VAT plus shipping costs

    Article No. 705217

    Tormek Driving Wheel Safety Lock Pin

    Tormek Driving Wheel Safety Lock Pin

    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €3.40

    incl. VAT plus shipping costs

    Article No. 800037

    Tormek Settling Disc

    Tormek Settling Disc

    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €16.40

    incl. VAT plus shipping costs

    Article No. 800034

    Tormek Replacement Honing Compound PA-70

    Tormek Replacement Honing Compound PA-70

    The honing paste is used with leather honing wheels. Thanks to the unique properties of the leather combined with the honing paste, the burr is effectively removed without damaging the cutting edge. At the same time, the bevel is finely...
    €10.90

    (Content: €155.71 / 1 kg)

    incl. VAT plus shipping costs

    Article No. 705213

    Knurled Screw fastening Rest for Tormek

    Knurled Screw fastening Rest for Tormek

    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €6.90

    incl. VAT plus shipping costs

    Article No. 800041

    Tormek Eyelet M12, H4 at Drive Wheel

    Tormek Eyelet M12, H4 at Drive Wheel

    Suitable for Tormek T-7, T-8 and old series models.
    €5.50

    incl. VAT plus shipping costs

    Article No. 800039

    variants
    €61.60

    incl. VAT plus shipping costs

    Article No. 800007

    Main Shaft Bearing for Tormek Supergrind 2000 / 1200

    Main Shaft Bearing for Tormek Supergrind 2000 / 1200

    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €5.80

    incl. VAT plus shipping costs

    Article No. 800010

    Tormek Horizontal Base XB-100

    Tormek Horizontal Base XB-100

    For Tormek T-7 and T-3.
    €28.50

    incl. VAT plus shipping costs

    Article No. 705226

    Tormek Water Container AWT-250

    Tormek Water Container AWT-250

    Suitable for Tormek T-7 and old series models.
    €35.10

    incl. VAT plus shipping costs

    Article No. 705216

    Tormek Adjustable Cover for Rest

    Tormek Adjustable Cover for Rest

    Suitable for Tormek T-7 and old series models.
    €27.40

    incl. VAT plus shipping costs

    Article No. 800040

    Tormek Water Container R3090

    Tormek Water Container R3090

    Suitable for Tormek T-8.
    €35.80

    incl. VAT plus shipping costs

    Article No. 800672

    Scraper for Water Container, Tormek T-8 Original

    Scraper for Water Container, Tormek T-8 Original

    For cleaning the water container of the Tormek T-8 Original.
    €10.50

    incl. VAT plus shipping costs

    Article No. 800673