Prices with or without VAT?
This setting applies to all prices but may be changed at any time.
 

Tormek T-4 incl. Adjustable Trueing Tool TT-50

"Tormek-Original" sharpening stone, grit 220, Ø 200 x 40 mm; leather honing wheel Ø 145 x 26 mm;...
NEW! Ultimate precision, solid zinc-cast top
The TORMEK T-4, an advanced version of the T-3 model, takes precision and stability to a new level. Both the vertical and horizontal bases for the universal support and the integrated carrying handle are made in the same zinc casting and therefore permanently joined together. The motor and main shaft are fixed to the cast top, resulting in a solid construction which significantly improves accuracy during sharpening.
"Tormek-Original" sharpening stone, grit 220, Ø 200 x 40 mm; leather honing wheel Ø 145 x 26 mm; solid zinc casting top with universal support with fine adjustment (horizontal and vertical settings). Impact-resistant ABS plastic housing. 230 V, 120 W, 120 rpm, 8.0 kg.
Includes:
  • Adjustable trueing tool TT-50 with diamond tip, for trueing ingrained or unround grinding wheels
  • Stone grader (SP-650)
  • Angle gauge (WM 200)
  • Honing compound (PA 70)
  • Handbook (HB 10)
  • Instruction video, (DVD 1)
  • Workshop "Sharpening on the Tormek"
Tormek Sharpening System
Proven for many years and constantly perfected, wet-working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables the achievement of exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch. The offered grinding wheels assures short sharpening times under the recommended conditions in combination with the greatest possible tool protection. The front end can also be used for plane honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and sliding water container.
A summary of the advantages of the Tormek sharpening machines
Longer working life of T-7 and T-4:
  • Stainless steel spindle with EzyLock-System for easier stone assembling
  • Better motor insulation

Additional advantages of T-7:
  • Electrophoretic dip painted casing
  • Designed for continuous operation
  • Improved water container with magnetic dirt collector, overspill rim and drip-off plate
  • 2 additional rubber feet to drain off water on the case

Guarantee:
  • T-4 has 7 years guarantee (when used for commercial, industrial or educational purpose the guarantee is 2 years)
  • T-7 has 10 years guarantee (with registration; also for commercial, industrial or educational purpose)
     
    more
    less
    Hier finden Sie weitere Details zum Hersteller

    Tormek® Sharpening System

    Proven for many years and constantly perfected wet-working sharpening machines are the basis of the ingenious Tormek-sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables the achievement of exact cutting geo-metry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch. The "Tormek-Original" ceramic wheel assures short sharpening times under all conditions in combination with the greatest possible tool protection. The front end can also be used for plane honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and sliding water container.

    A summary of the advantages of the Tormek sharpening machines

    Longer working life of T-7 and T-4:

    • Stainless steel spindle with EzyLock-System for easier stone assembling
    • Better motor insulation

    Guarantee:

    • T-4 has 7 years guarantee, when used for commercial, industrial or educational purpose the guarantee is 2 years.
    • T-7 has 10 years guarantee with registration, also for commercial, industrial or educational purpose.

    Additional advantages of T-7:

    • Electrophoretic dip painted casing
    • Designed for continuous operation
    • Improved water container with magnetic dirt collector, overspill rim and drip-off plate
    • 2 additional rubber feet to drain off water on the case
    Additional links

    Available downloads:

    Tormek Machine Models
     

    Further information

    Our Services Tips & Tricks Workshops
    Learn the professional use of the Tormek machine. If you buy a Tormek T-4 or T-8 you may take part in a special course "Sharpening with Tormek" free of charge.
    Article no. 716031
    Brand Tormek

    Set consists of the following articles:

    Ready to ship today, Delivery time 1-3 workdays within Germany

    Price advantage

    €399.00 per Set

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Type Price Quantity
    a:3:{s:2:"DE";s:40:"Tormek T-4 inkl. Abdrehvorrichtung TT-50";s:2:"EN";s:46:"Tormek T-4 incl. Adjustable Trueing Tool TT-50";s:2:"FR";s:54:"T-4 Tormek incl. dispositif de dressage de meule TT-50";} Price advantage
      €399.00
     

     
     
    Plenty of accessories and spare parts

    Accessories

    Tormek Handbook, Grinding and Sharpening Edge Tools (HB 10)
    Tormek® Handbook, Grinding and Sharpening Edge Tools (HB 10)
    By Torgny Jansson. General introduction to the basics of sharpening and detailed instructions for use of the Tormek. (Every machine comes with handbook and DVD).
    €12.30

    incl. VAT plus shipping costs

    Article No. 705199

    DICTUM Japanese Sharpening Wheel, Grit 1000
    DICTUM® Japanese Sharpening Wheel, Grit 1000
    Suitable for HSS as well as carbon steel and double-layered steel. Hard bond for highly effective polishing with little abrasion.
    €122.80

    incl. VAT plus shipping costs

    Article No. 716040

     

    Replacement parts

    Tormek Orginal Replacement Wheel SG-200, Grit 220
    Tormek Orginal Replacement Wheel SG-200, Grit 220
    This hard-bond stone is suitable for pre-sharpening double-layered blades as well as chrome-vanadium steel and HSS.
    €91.90

    incl. VAT plus shipping costs

    Article No. 705196

    Plastic bearing
    Plastic bearing
    Fits No. 705228 , 705236 and 705247 .
    €2.50

    incl. VAT plus shipping costs

    Article No. 800012

    Tormek Settling Disk
    Tormek Settling Disk
    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €1.50

    incl. VAT plus shipping costs

    Article No. 800035

    Tormek Pro Angle Master WM-200
    Tormek Pro Angle Master WM-200
    For setting the grinding angle and checking the bevel geometry. Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.
    €19.30

    incl. VAT plus shipping costs

    Article No. 705240

    Tormek Drive Wheel with Rubber Band for T-3 and T-4
    Tormek Drive Wheel with Rubber Band for T-3 and T-4
    Suitable for Tormek T-3, T-4 and old series models.
    €27.90

    incl. VAT plus shipping costs

    Article No. 800008

    Knurled Nut for Tormek
    Knurled Nut for Tormek
    Fits Tormek T-3, T-4, T-7 and T-8.
    €5.80

    incl. VAT plus shipping costs

    Article No. 800343

    Tormek Eyelet for Cover No. 800040
    Tormek Eyelet for Cover No. 800040
    Suitable for Tormek T-3, T-7 and old series models.
    €3.70

    incl. VAT plus shipping costs

    Article No. 800042

    Tormek Water Container WB-200
    Tormek Water Container WB-200
    Suitable for Tormek T-3, T-4 and old series models.
    €12.90

    incl. VAT plus shipping costs

    Article No. 705241

    Tormek Diamond Tip ADV D 50
    Tormek Diamond Tip ADV D 50
    For the diamond stone dresser. Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.
    €35.90

    incl. VAT plus shipping costs

    Article No. 705217

    Tormek Driving Wheel Safety Lock Pin
    Tormek Driving Wheel Safety Lock Pin
    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €1.50

    incl. VAT plus shipping costs

    Article No. 800037

    Tormek Instruction DVD
    Tormek Instruction DVD
    „Edge-tool sharpening the Tormek way“. (Comes with every machine). 23 min., DVD 2.0, PAL. In German, English, French and Swedish.
    €12.90

    incl. VAT plus shipping costs

    Article No. 705446

    Tormek Settling Disk
    Tormek Settling Disk
    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €2.30

    incl. VAT plus shipping costs

    Article No. 800034

    Tormek Handbook, Nassschleifen und Abziehen von Schneidwerkzeugen (HB 10)
    Tormek Handbook, Nassschleifen und Abziehen von...
    By Torgny Jansson. General introduction to the basics of sharpening and detailed instructions for use of the Tormek. (Every machine comes with handbook and DVD).
    €23.20

    incl. VAT plus shipping costs

    Article No. 705211

    Tormek Honing Compound PA-70
    Tormek Honing Compound PA-70
    For leather honing wheels No. 705212 and 705197 . 70 g.
    €9.60

    (Content: €13.71 / 100 gramme)

    incl. VAT plus shipping costs

    Article No. 705213

    Knurled Screw fastening Rest for Tormek
    Knurled Screw fastening Rest for Tormek
    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €4.70

    incl. VAT plus shipping costs

    Article No. 800041

    Tormek Wedge, Universal Rest
    Tormek Wedge, Universal Rest
    Suitable for Tormek T-3 and old series models.
    €5.30

    incl. VAT plus shipping costs

    Article No. 800045

    Tormek Cover
    Tormek Cover
    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €4.10

    incl. VAT plus shipping costs

    Article No. 800047

    Universal Support US-103 for T-3 and T-4
    Universal Support US-103 for T-3 and T-4
    With fine adjustment suitable for Tormek T-3, T-4 and old series models.
    €33.60

    incl. VAT plus shipping costs

    Article No. 705202

    €38.40

    incl. VAT plus shipping costs

    Article No. 705197

    Main Shaft Bearing for Tormek Supergrind 2000 / 1200
    Main Shaft Bearing for Tormek Supergrind 2000 / 1200
    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €3.90

    incl. VAT plus shipping costs

    Article No. 800010

    Tormek Assembling Wave
    Tormek Assembling Wave
    Suitable for Tormek T-3 and old series models.
    €4.90

    incl. VAT plus shipping costs

    Article No. 800043

    €20.50

    incl. VAT plus shipping costs

    Article No. 705226

    Tormek Main Shaft Set MSK-200
    Tormek Main Shaft Set MSK-200
    For easier fitting of the grinding stones the main shaft is now supplied with a left-hand thread. The new EzyLock nut can be tightened by hand and securely clamps the stone. Set consists of main shaft with left-hand thread, EzyLock nut,...
    €37.90

    incl. VAT plus shipping costs

    Article No. 800501

     

    Customers also purchased

    Customers also viewed

    Viewed