Sculpting tools

1 of 38
DICTUM Carving Tool, Flat/Skew, Double Bevel 2/6 mm

DICTUM Carving Tool, Flat/Skew, Double Bevel

Straight chisels are preferred for lettering, but are also suitable for chip carving and for smoothing straight or slightly convex surfaces in figure sculpting. The skewed variant can be drawn across the surface and cuts into corners...
variants
   
€27.50

incl. VAT plus shipping costs

Article No. 701524

DICTUM Carving Tools, 12-Piece Set

DICTUM Carving Tools, 12-Piece Set

With these twelve sculptor's tools you are perfectly equipped for sculpting figures and ornaments. Flat 10 mm; flat/skew 10 mm; V-parting tool 41 V 65° / 6 mm; gouges, straight sweep 6 / 10 and 20 mm; sweep 8 / 6 and 13 mm; sweep 9 / 6...
   
€399.00

incl. VAT plus shipping costs

Article No. 701481

DICTUM Carving Tool, Pod Tool 64/6 mm

DICTUM Carving Tool, Pod Tool

Thanks to their conical form, pod tools are used for backcutting in relief carving and for general finishing work. Their projecting corners make it easy to cut within narrow recesses, in which the angle of the gouge can still be corrected.
variants
   
€29.60

incl. VAT plus shipping costs

Article No. 701499

DICTUM Carving Tool, Pod Tool 66/6 mm

DICTUM Carving Tool, Pod Tool

Thanks to their conical form, pod tools are used for backcutting in relief carving and for general finishing work. Their projecting corners make it easy to cut within narrow recesses, in which the angle of the gouge can still be corrected.
variants
   
€29.50

incl. VAT plus shipping costs

Article No. 701506

DICTUM Carving Tool, Pod Tool 70/6 mm

DICTUM Carving Tool, Pod Tool

Thanks to their conical form, pod tools are used for backcutting in relief carving and for general finishing work. Their projecting corners make it easy to cut within narrow recesses, in which the angle of the gouge can still be corrected.
variants
   
€31.90

incl. VAT plus shipping costs

Article No. 701508

DICTUM Carving Tool, Dogleg Gouge 82/6 mm

DICTUM Carving Tool, Dogleg Gouge 82/6 mm

This gouge is used to clear the ground of deep, shouldered areas to their final depth and to rework corners.
   
€47.40

incl. VAT plus shipping costs

Article No. 701529

DICTUM Carving Tool, Gouge, Back Bent, Inside Bevel 34/6 mm

DICTUM Carving Tools, Gouges, Back Bent, Inside Bevel

Primarily used for convex shapes and cylindrical profiles which cannot be worked on with a turned straight gouge because of the strong curve.
variants
   
€33.90

incl. VAT plus shipping costs

Article No. 701477

DICTUM Carving Tool, Gouge/V-Parting Tool, Short Bent 29/10 mm

DICTUM Carving Tools, Gouge/V-Parting Tools, Short Bent

Similar to the long bent form, these gouges are also used for deep, curved shapes. The even stronger bend of the gouge allows you to carve transitions in even deeper areas and to create small radiuses and arches.
variants
   
€30.60

incl. VAT plus shipping costs

Article No. 701461

DICTUM Carving Tool, Gouge/V-Parting Tool, Short Bent 30/10 mm

DICTUM Carving Tools, Gouge/V-Parting Tools, Short Bent

Similar to the long bent form, these gouges are also used for deep, curved shapes. The even stronger bend of the gouge allows you to carve transitions in even deeper areas and to create small radiuses and arches.
variants
   
€30.60

incl. VAT plus shipping costs

Article No. 701463

DICTUM Carving Tool, Gouge/V-Parting Tool, Short Bent 32/6 mm

DICTUM Carving Tools, Gouge/V-Parting Tools, Short Bent

Similar to the long bent form, these gouges are also used for deep, curved shapes. The even stronger bend of the gouge allows you to carve transitions in even deeper areas and to create small radiuses and arches.
variants
   
€30.80

incl. VAT plus shipping costs

Article No. 701749

DICTUM Carving Tool, V-Parting Tool 41 V 65°/3 mm

DICTUM Carving Tools, V-Parting Tools

V-parting tools are popularly used in relief carving to delimit areas. Another important use is the cutting of even grooves.
variants
   
€32.10

incl. VAT plus shipping costs

Article No. 701466

DICTUM Carving Tool, V-Parting Tool 45 V 95°/3 mm

DICTUM Carving Tools, V-Parting Tools

V-parting tools are popularly used in relief carving to delimit areas. Another important use is the cutting of even grooves.
variants
   
€32.40

incl. VAT plus shipping costs

Article No. 701475

1 of 38