WoodRat WR900

WoodRat - probably the most versatile system for your power router

Developed for cutting classic joints in solid wood, such as dovetail and finger joints, mortises...
Developed for cutting classic joints in solid wood, such as dovetail and finger joints, mortises and tenons, housing joints, lap joints, tongue and groove joints, as well as for profiling, cutting grooves and rabbets, and much more.
When spacing fingers and tenons you are completely free and independent of templates. You work like a classic joiner by first cutting the positive part and then using it as a template for the counterpart. Instead of sawing and chiselling, you cut with the router based on markings.
The WoodRat channel is made of solid, anodised aluminium, with a sliding bar at the front that is moved horizontally without backlash by means of a steel cable. There are two clamping systems on the sliding bar (or only one on the WoodRat 600). You clamp the workpiece extremely tight so that you can climb-cut tenons, tongues and raised panels without risk. In the left clamping system, you position the model and transfer the cut outline directly to the workpiece.
Above the channel is the base plate on which glides the router plate, which is guided either with two guide rails or with the centre plate. The router is screwed to the router plate. These are ideal conditions for safely working solid wood in a variety of ways - as precisely as with a router on a cross-table, but much more flexible!
Additional benefits:
  • Compatible with almost all known routers
  • Can work wood between 5 and 50 mm thick
  • No expensive precision bits required
  • Maximum clamping width up to 750 mm
  • Additional applications possible with self-made accessories
  • Safe climb-cutting without breakout
  • High repeat accuracy
  • Cutting based on markings
  • All router settings are comfortable to use
  • Simple, safe, maintenance-free mechanics
WoodRat
Developed for cutting classic joints in solid wood, such as dovetail and finger joints, mortises and tenons, housing joints, lap joints, tongue and groove joints, as well as for profiling, cutting grooves and rabbets, and much more.
When spacing fingers and tenons you are completely free and independent of templates. You work like a classic joiner by first cutting the positive part and then using it as a template for the counterpart. Instead of sawing and chiselling, you cut with the router based on markings.
The WoodRat channel is made of solid, anodised aluminium, with a sliding bar at the front that is moved horizontally without backlash by means of a steel cable. There is a clamping systems on the sliding bar. You clamp the workpiece extremely tight so that you can climb-cut tenons, tongues and raised panels without risk. In the left clamping system, you position the model and transfer the cut outline directly to the workpiece.
Above the channel is the base plate on which glides the router plate, which is guided either with two guide rails or with the centre plate. The router is screwed to the router plate. These are ideal conditions for safely working solid wood in a variety of ways - as precisely as with a router on a cross-table, but much more flexible!
Additional benefits:
  • Compatible with almost all known routers
  • Can work wood between 5 and 50 mm thick
  • No expensive precision bits required
  • Maximum clamping width up to 430 mm
  • Additional applications possible with self-made accessories
  • Safe climb-cutting without breakout
  • High repeat accuracy
  • Cutting based on markings
  • All router settings are comfortable to use
  • Simple, safe, maintenance-free mechanics

    Scope of delivery

    • WR 900 with fitted sliding bar
    • 2 guide rails
    • 2 aluminium fences
    • 2 cam locks
    • Base plate
    • Router plate
    • Centre plate
    • Clear centre liner
    • Dust chute
    • Cutter block
    • Parallelogram
    • Raising plate
    • Aluminium stop
    • 2 stops
    • Spare-parts pack with Bowden wire
    • 2 acrylic slats
    • Measuring rod and cursor
    • Adhesive tape
    • NEW:Detailed and revised German manual (English on demand)
    • Includes voucher for a one day course Making Classic Wood Joints with the WoodRat
    • Router not included!
     
    more
    less
    Further details on the manufacturer

    WoodRat

    WoodRat

    Designed by Woodworkers.Developed in 1988 by architect and woodworker Martin Godfrey, the WoodRat has become an insider tip on the woodworking scene. When it comes to precision and versatility of router accessories, it is one of the major innovations of the last few decades.

    Additional links
    • Number of Fences 2
    • Workpiece Width max. 750 mm
    • Dimensions 960 mm
    Article no. 717600
    Brand WoodRat
    €699.00 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Type Price Quantity
    WoodRat WR900
    WoodRat WR900

    Article number 717600
      €699.00
     
    Plenty of accessories and spare parts

    Accessories

    Hoffmann Key W2, 100 Pieces, 9.5 mm

    Hoffmann Key W2, 100 Pieces, 9.5 mm

    Key cross-section: 10 x 8 mm Applications for the Hoffmann Key W2 Interior fittings Inset door frames Skirting and cornices Cladding doors and windows Mitred or square cut architraves Cabinetry
    variants
    €8.40

    incl. VAT plus shipping costs

    Article No. 718526

    Hoffmann Key W3, 100 Pieces, 15.8 mm

    Hoffmann Key W3, 100 Pieces, 15.8 mm

    Key cross-section: 13 x 9.5 mm Applications for the Hoffmann Key W3 Interior fittings Work-tops Corner units/framing Handrails Angular and circular windows Wood/aluminium windows
    variants
    €11.90

    incl. VAT plus shipping costs

    Article No. 718532

    Hoffmann Key W1, 100 Pieces, 10 mm

    Hoffmann Key W1, 100 Pieces, 10 mm

    Key cross-section: 7 x 5.5 mm. Applications for the Hoffmann Key W1 Frames for pictures, mirrors, boxes set-on plinths Cornices Georgian window bars Drawers
    variants
    €6.60

    incl. VAT plus shipping costs

    Article No. 718523

    Hoffmann Dovetail Router Bit CT, for Key W1

    Hoffmann Dovetail Router Bit CT, for Key W1

    Original Hoffmann Dovetail router bit in tungsten carbide (CT). Matches the Hoffmann Key for a perfect fit and lasting joints.
    variants
    €62.30

    incl. VAT plus shipping costs

    Article No. 718520

    MAFELL Collet 6 mm

    MAFELL Collet 6 mm

    Fits MAFELL LO 65 Ec.
    variants
    €42.84

    incl. VAT plus shipping costs

    Article No. 704233K