Underframe for DICTUM Multifunction Table
For exact, reproducible, fast and easy sawing or milling of any angle. Whether in the hole grid of the table top or in the T-slot for infinitely variable angle settings, with the DICTUM bench dog system and a guide rail (available as...
€1,131.00
incl. VAT plus shipping costs
Article No. 707796
Sliding Table for DICTUM Universal Guide Rail
Plastic table with guide stop for DICTUM Universal Clamp and Guide Rails. Hand circular saws, for example, or other machines can be mounted on the table (although the user must bore mounting holes additionally) in order to be slid along...
€28.20
incl. VAT plus shipping costs
Article No. 727354
Cross Connector for DICTUM Universal Guide Rail, 4-Piece Set
90° Connector for DICTUM Universal Guide Rail. Angled or square templates can be assembled. Ideal e.g., for pocket grooves.
€19.20
incl. VAT plus shipping costs
Article No. 727359
Longitudinal Connector for DICTUM Universal Guide Rail
For extending the DICTUM Universal Guide Rails. Two or more universal guide rails can be connected to each other with the longitudinal connectors.
€15.20
incl. VAT plus shipping costs
Article No. 727358
Workpiece Hold Down Clamp for DICTUM Universal Guide Rail
Hold down clamps and stops in two versions e.g. for series boring on drill presses. Workpieces can be quickly and precisely positioned and securely clamped when used in combination with the DICTUM Universal Clamp and Guide Rails. Maximum...
€39.50
incl. VAT plus shipping costs
Article No. 727353
90° Try Square for DICTUM Universal Guide Rail
The square converts the universal clamp and guide rail into a 90° angle. The try square is screwed directly to the clamp rail. This allows rapid material cutting without the need for extensive scribing. Drilling screws included.
€8.30
incl. VAT plus shipping costs
Article No. 727345
Star Knob Screws with T-slot Nuts for DICTUM Universal Guide...
You can make your own fixing devices for the DICTUM Universal Guide Rails using this set. Incl. 6 star knob screws, washers and T-slot nuts each. Thread length 8 mm, clamping range on rail (without washers) 5.5-10 mm.
€4.90
incl. VAT plus shipping costs
Article No. 727348
Lever Clamp Extension for DICTUM Universal Guide Rail
The 175 mm long lever fits all DICTUM Universal Clamp and Guide Rails. It extends the lever and facilitates the fastening or releasing of the guide rail
€5.60
incl. VAT plus shipping costs
Article No. 727350
Wide Chucks for DICTUM Universal Guide Rail, Pair
Use of the wider chucks distributes the clamping pressure on the workpiece more evenly and prevents any pressure marks. You can, for example, attach wooden jaw faces to the chuck via the two drill-holes on each chuck jaw. The chuck is...
€6.50
incl. VAT plus shipping costs
Article No. 727349
DICTUM Universal Clamp and Guide Rail
Guide rails are indispensable for straight edge work with hand circular saws, jigsaws or routers. The universally applicable DICTUM guide rail may be positioned quickly and securely with the integrated clamping system. The rigid...
€30.50
incl. VAT plus shipping costs
Article No. 727342
Rail Ferrules for DICTUM Universal Guide Rail, Pair
For clamping the DICTUM Universal Guide Rail to the workpiece. T-slot nuts allow clamping across the rail. Maximum clamping height 50 mm. Jaw depth 18 mm.
€35.80
incl. VAT plus shipping costs
Article No. 727357
DICTUM Universal Guide Rail
The guide rail is clamped securely to the workpiece with the track clamps (No. 727357 ) for linear milling and saw work. For greater distances, multiple rails can be assembled with longitudinal connectors (No. 727358 ). These rails can...
€23.50
incl. VAT plus shipping costs
Article No. 727356
DICTUM Universal Guide Rail Set 710
For milling work, the guide rails are firmly clamped to the panels to be machined. The cross connectors allow the rails to be mounted at a 90° angle, e.g. for pocket milling. The rigid aluminium profile with its T-slots offers additional...
€99.90
incl. VAT plus shipping costs
Article No. 727479
Featherboard for DICTUM Universal Guide Rail
Whether for milling, on the saw or sanding equipment, the featherboard presses the workpiece securely to the length stop of the machine. Mounted on the DICTUM Universal Clamp and Guide Rail it can be used universally. Dimension 193 x 80...
€12.60
incl. VAT plus shipping costs
Article No. 727352
Side-To-Side Connectors for DICTUM Universal Guide Rail,...
Two or more universal clamp and guide rails can be connected adjacently. This allows the rails to be lengthened. The clamping force can be increased by connecting multiple chucks to each other. Includes screws and T-slot nuts.
€26.40
incl. VAT plus shipping costs
Article No. 727347
Back-To-Back Connectors for DICTUM Universal Guide Rail,...
Connect two clamp and guide rails with the twist of a hand and use them as a clamping aid on the workbench. You can clamp in two directions simultaneously with the rails using the back-to-back assembly.
€21.70
incl. VAT plus shipping costs
Article No. 727346
Stop Block for DICTUM Universal Guide Rail
In the case of insert milling or sawing, you need the entry and exit point of the tool. The travel path of the machine can be precisely limited with the stop block on the clamp and guide rail. Suitable for all DICTUM Universal Clamp and...
€17.70
incl. VAT plus shipping costs
Article No. 727351
€18.30
incl. VAT plus shipping costs
Article No. 727362
ProfessionalLine Extension Cable, 10 m
Extension cable made of BREEMAXX-PUR cable IP 44. Ideal for rough use on construction sites, in the workshop or other industrial environments. With extra-robust safety plug and socket with cap. UV-resistant plug and socket with bend...
€46.00
incl. VAT plus shipping costs
Article No. 720299
ProfessionalLine Cable Reel, 33 m
Suitable for construction sites as per BGI 608 and for permanent outdoor use. With BREMAXX-PUR cable IP 44. Pro-reel with all-round roll over protection. The Rubbabren body and reel material made of a plastic and rubber mix is extremely...
€179.00
incl. VAT plus shipping costs
Article No. 720297
ProfessionalLine Power Block
Mobile power block with 15 m extension cable and 4 sockets. IP 54, suitable for rough use on construction sites and for permanent outdoor use. With visual indicator lamp and foldable suspension hook and strap for more mounting options....
€49.00
incl. VAT plus shipping costs
Article No. 720298
ProfessionalLine SteelCore Cable Reel, 33 m
Fully insulated and with steel core suitable for construction sites as per BGI 608 and for permanent outdoor use. With BREMAXX-PUR cable IP 44. Reel body made of sheet steel, front and back insulated for professional use. Innovative...
€153.00
incl. VAT plus shipping costs
Article No. 720296
NVR Switch with Europlug
The switch unit can be mounted on e.g. router or saw tables in order to easily switch the attached machines on or off. The machine cable is plugged into the switch box, which is connected to the power supply. The undervoltage release...
€69.00
incl. VAT plus shipping costs
Article No. 707989
UJK Dog Rail Clip, 2-Piece Set
These simple-looking spring clips firmly secure a guide rail to Parf dogs or other dogs, e.g. when sawing on a multifunction table. This prevents the guide rail from accidentally shifting due to a slippery or dusty surface or vibrations,...
€23.90
incl. VAT plus shipping costs
Article No. 707987
UJK Parf Chamfer Tool
This specially designed tool cuts a neat, small chamfer around the precise 20 mm dog hole made by the UJK Technology 20 mm cutter, as part of using the Parf Guide System. You can also use it on the Festool MFT/3 table. A shallow chamfer...
€34.50
incl. VAT plus shipping costs
Article No. 720654
Silbergleit Dry Slip-additive
Anti-rust and non-stick coating with long-lasting effect thanks to its exceptional abrasion resistance. Easy application, e.g. with a cloth. Does not contain graphite or silicone. Areas of application As slip-additive: Invisible and dry...
€10.80
(Content: €43.20 / 1 litre)
incl. VAT plus shipping costs
Article No. 706178
UJK Parfguide System MK II
The Parf drilling system is a very precise and fast method for making your own perforated plates for e.g. multifunction tables and workbenches. The 20 mm boreholes in an exact, right-angled grid equipped with Parf Bank Pins or Parf Super...
€229.00
incl. VAT plus shipping costs
Article No. 720774
Kickback Protection for MICROJIG GRR-RIPPER 3D
Grips the rear edge of the workpiece, increases the feed force, prevents the workpiece from being ejected and is adjustable to the respective workpiece thickness. Avoids tear-outs and splintering when used as »sacrificial wood«. Scope of...
€19.50
incl. VAT plus shipping costs
Article No. 718047
Thrust Piece 3 mm for MICROJIG Pushblock GRR-RIPPER 3D
Extremely narrow pressure beam that guides thin strips up to a width of max. 3 mm safely between saw blade and longitudinal fence. A non-slip rubber coating prevents the workpiece from slipping and avoids pressure points on soft wood....
€19.50
incl. VAT plus shipping costs
Article No. 718048
MICROJIG Pushboard GRR-RIP BLOCK
The well thought-out pushboard has non-slip rubber studs on the underside. The clever touch is the four lowerable hooks that serve as kickback protection and, depending on the application, can be pushed up or down to hook the workpiece....
€40.20
incl. VAT plus shipping costs
Article No. 718049
Spare Thrust Pieces for MICROJIG Pushblock GRR-RIPPER 3D, Set
Fits MICROJIG Pushblock GRR-RIPPER 3D (No. 718045 , 718046 ). 3 pieces, width 6, 13, 28 mm.
€41.20
incl. VAT plus shipping costs
Article No. 718050
UJK Surface Cam Clamps, Ø 20 mm, 2-Piece-Set
The surface cam clamps are fitted on the 20 mm Parf Dogs or bench dogs to prevent the workpieces from being pulled up and slipping. When milling wooden slats or Domino dowels, the cam clamps secure the workpiece in place on the...
€19.80
incl. VAT plus shipping costs
Article No. 715521
Klemmsia Slot Nut with External Thread
Practical slot nut for Klemmsia Hold-down Clamp Adapter Basic and Basic Mini. Suitable for PantoRouter No. 720556 , 720557 , 720757 , 720755 ; DICTUM Multifunction Table No. 707796 ; DICTUM T-Track No. 707764 , 707765 , 707766 . Thread...
€5.10
incl. VAT plus shipping costs
Article No. 708119
DICTUM Self-clamping Connecting Bushing Ø 20 mm, M8
The 18 mm long bushing with internal thread acts as a connector between self-made auxiliary devices, e.g. fences or templates, which are mounted in the hole grid of a workbench or multifunction table. A circumferential rubber O-ring...
€4.90
incl. VAT plus shipping costs
Article No. 729506
Protective Screen for MICROJIG GRR
Fits GRR-RIPPER 3D push block and GRR RIP Block. The transparent protective shield can also be used as a parallel fence.
€19.40
incl. VAT plus shipping costs
Article No. 718493
MICROJIG Pushblock GRR-RIPPER 3D
The 3D pushblock enables the most precise cuts on workpieces and protects your hands in every working position. No other push stick or sliding block offers more precise workpiece control or a higher degree of safety. Safety in 3D: 1)...
€69.50
incl. VAT plus shipping costs
Article No. 718045
Microdial Tapering Jig
For formatting panel material or producing tapered components. Create 2-, 4-, 6- or 8-sided tapered chair or table legs with unmatched precision, control and safety. For even more safety, you can work with up to two GRR-RIPPER ADVANCED...
€153.90
incl. VAT plus shipping costs
Article No. 718495
Additional Profiles for DICTUM Multifunction Table PRO, Cross...
The additional aluminium profiles with milled screw connectors allow the installation of e.g. further shelves on the DICTUM Multifunctional Table PRO. The additional profiles are available in pairs for longitudinal (No. 729663 ) or cross...
€93.40
incl. VAT plus shipping costs
Article No. 729662
Additional Profiles for DICTUM Multifunction Table PRO,...
The additional aluminium profiles with milled screw connectors allow the installation of e.g. further shelves on the DICTUM Multifunctional Table PRO. The additional profiles are available in pairs for longitudinal (No. 729663 ) or cross...
€113.90
incl. VAT plus shipping costs
Article No. 729663
UJK Parf System Fence
Precision milled fence, fits Parf System. The 600 mm long aluminium fence has three sets of holes along its length. Each set comprises four holes. The distance between each set is 96 mm; the holes are at 32 mm centres (for System 32)....
€117.00
incl. VAT plus shipping costs
Article No. 715520
€67.47
incl. VAT plus shipping costs
Article No. 721102K
€72.83
incl. VAT plus shipping costs
Article No. 721103K
€16.07
incl. VAT plus shipping costs
Article No. 721151K
MAFELL Guide Bag Set incl. 2 x F 160 + F-VS + 2 x F-SZ 180 mm
The set includes: 2 x F 160 + F-VS + 2 x F-SZ 180 MM + guide bag.
€384.49
€245.26
incl. VAT plus shipping costs
Article No. 721153K
Groz Drill Press Vice, UG75
This lightweight drill press vice with a prism jaw and a smooth, laterally guided jaw is used for secure clamping and fixing of workpieces on bench and pillar drills. Both jaws have support surfaces for clamping flat workpieces. In...
€49.70
incl. VAT plus shipping costs
Article No. 714521
Milescraft »TrackClamps«, 2-Piece Set
Compact, lightweight track clamps. For e.g. Festool guide rails or T-tracks with min. 12 mm inner width and 7 mm slot opening.
€26.50
incl. VAT plus shipping costs
Article No. 714540
Milescraft »Grabber« Push Block
The Milescraft Grabber is ideal for use on router tables, table saws, jointers and even band saws. Safety is very important and you always want to keep your hands and fingers as far away from the cutting tool as possible. The ergonomic...
€19.90
incl. VAT plus shipping costs
Article No. 714533
Wixey Digital Setting Gauge for Woodworking Machines
Designed for woodworking, this depth setting gauge is useful for many applications. The easy-to-read display is simple to operate. The measuring tip can also be used to take depth measurements in narrow boreholes. Applications: Distance...
€27.90
incl. VAT plus shipping costs
Article No. 721056