Nitecore Li-Ion Battery 18650, 4000 mAh, NL1840HP
The Nitecore Li-Ion battery type 18650 NL1840HP has a capacity of 4000 mAh and can deliver an output of up to 10 A. This makes it ideally suited for high-power LED torches.
€26.90
incl. VAT plus shipping costs
Article No. 826256
Nitecore HC65 UHE Headlamp, 2000 lm
The Nitecore HC65 UHE is the upgraded successor to the popular HC65 V2. The HC65 UHE is a powerful and compact headlamp equipped with three different light sources. The main LED's of the HC65 UHE achieves an impressive luminosity of 2000...
€99.90
incl. VAT plus shipping costs
Article No. 826255
DICTUM Water-cooled Grinder SM250
Die DICTUM Nassschleifmaschine ist das ideale Schärfsystem - einfache und sichere Handhabung, exakte Schneidengeometrien, reproduzierbare Winkel. Ob Stemm-, Hobel- oder Drechseleisen, Messer oder Scheren, die Nassschleifmaschine als...
€699.00
incl. VAT plus shipping costs
Article No. 707799
Plastic Bearing for DICTUM Water-cooled Grinder
Plain bearing with collar, internal/external diameter 15/21 mm, length 10 mm. Fits DICTUM Water-cooled Grinder No. 707799.
€1.90
incl. VAT plus shipping costs
Article No. 714561
Internal Clamping Flange for DICTUM Water-cooled Grinder
This clamping flange is fitted behind the grinding wheel of the DICTUM Water-cooled Grinder (No. 707799). Internal/external diameter 12/50 mm.
€19.50
incl. VAT plus shipping costs
Article No. 714568
Rubberised Magnet for Water Container
This magnet with rubber coat can be put into the water container of any water-cooled grinder. The removed metal particles adhere to the magnet and thus no longer contaminate the cooling water. The magnet can then be easily removed from...
€4.90
incl. VAT plus shipping costs
Article No. 714569
Water Deflector for DICTUM Water-cooled Grinder
The water deflector has two magnets and is simply attached to the side plate of the wet grinding machine. Dripping water that falls onto the housing, especially when processing wide blades, is thus drained off via the side plate into the...
€16.90
incl. VAT plus shipping costs
Article No. 714570
Star Knob for DICTUM Water-cooled Grinder
Low-shaped star knob. Brass insert with M12 thread. Fits DICTUM Water-cooled Grinder No. 707799.
€6.90
incl. VAT plus shipping costs
Article No. 714571
€12.90
incl. VAT plus shipping costs
Article No. 714579
DICTUM Support Arm for Sharpening Guides
The support arm with 12 mm diameter fits all common sharpening guides with 12 mm holder. It is the connection between the machine and sharpening guide. When sharpening without a support, it serves as a hand rest. A knurled nut allows...
€49.90
incl. VAT plus shipping costs
Article No. 720807
DICTUM Stone Grader
The stone grader can be used to change or influence the grit of your grinding wheel. A 220 grit grinding wheel can be changed to a fine grit of approx. 1000 by pressing the fine side of the stone grader onto the running wheel. To reset...
€19.90
incl. VAT plus shipping costs
Article No. 721040
Setting Gauge for Sharpening Guides, Basic
For setting the bevel angles for sharpening guides on water-cooled grinders or double-wheeled grinders. The grinding wheel diameter and the desired bevel angle are set on the gauge and then transferred to the chisel or plane blade...
€19.90
incl. VAT plus shipping costs
Article No. 721043