Nano Hone Lapping Plate Ridge Tech NL-5

This lapping plate, with its star and hexagon pattern, maximizes the number of edge-material...
This lapping plate, with its star and hexagon pattern, maximizes the number of edge-material contact points. Recommended for sharpening stones from 1000 to 30 000 grit. Flatness tolerance < 0.05 mm (after diamond coating). Approx. grit 240 (60 micron).
Diamond lapping plates have either a full-surface or an interrupted diamond coating. With lapping plates with interrupted diamond coating, not the plate's entire surface is brought to bear but only the virtually indestructible and sharp edges of each of the raised party of the pattern distributed over the plate’s surface.
This design has the following advantages:
  • Makes shaping a lot quicker thanks to allowing the abrasive slurry to quickly drain away
  • Requires less force thanks to the smaller contact area
  • Significantly longer lapping plate service life
  • Extremely even surface and hence able to create even surfaces on the stone being resurfaced
     
    more
    less
    Further details on the manufacturer

    Nano Hone

    Nano Hone

    Nano Hone is an entity of HMS Enterprises Inc., which is headquartered in the USA and has a production site in Japan. Nano Hone has over 40 years experience in the field of sharpening, dressing and woodworking, and is dedicated to developing outstanding, innovative and high-quality sharpening products.

    • Dimensions 240 x 60 x 20 mm
    • Grit 240 (60 microns)
    Article no. 711221
    Brand Nano Hone
    €294.00 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Article
    Dimensions
    Grit
    Price
    Quantity

    Article no.: 711221

    Dimensions: 240 x 60 x 20 mm
    Grit: 240 (60 microns)
    Price: €294.00
    Quantity:
     
    Suitable for

    Suitable for

    Blue Belgian Whetstone, Honing/Polishing Stone, Bench Stone

    Blue Belgian Whetstone, Honing/Polishing Stone, Bench Stone

    Thicker and longer lasting than the cream-coloured stones, but with equally good honing properties.
    €67.90

    incl. VAT plus shipping costs

    Article No. 705570

    Cerax Combination Stone with Base, Grit 1000/3000

    Cerax Combination Stone with Base, Grit 1000/3000

    With two different grits. Comes with Nagura stone. For sharpening.
    variants
    €54.60

    incl. VAT plus shipping costs

    Article No. 711024

    Cerax Combination Stone without Base, Grit 1000/3000

    Cerax Combination Stone without Base, Grit 1000/3000

    With two different grits. Comes with Nagura stone. For sharpening.
    variants
    €38.70

    incl. VAT plus shipping costs

    Article No. 711558

    Awasedo Polishing Stone, Grit 8000

    Awasedo Polishing Stone, Grit 8000

    Traditional Japanese polishing stone manufactured in a small batch series. It hardly clogs, features a noticeable abrasive action and yet a high polishing effect. Because of its hard bond, the stone does not wear quickly. Thanks to its...
    €81.90

    incl. VAT plus shipping costs

    Article No. 711084

    variants
    €84.50 €76.90

    incl. VAT plus shipping costs

    Article No. 711338

    variants
    €101.30 €89.00

    incl. VAT plus shipping costs

    Article No. 711339

    Naniwa »Super Stone S1« Sharpening Stone, Grit 800

    Naniwa »Super Stone S1« Sharpening Stone, Grit 800

    The Super Stone S1 is equivalent to the Super Stone S2. The different name is merely due to the smaller abrasive thickness of 10 mm. This stone series therefore is a reasonably-priced alternative for sharpening jobs where only small...
    €32.00 €24.90

    incl. VAT plus shipping costs

    Article No. 711342

    Naniwa »Super Stone S1« Combination Stone, Grit 3000/10 000

    Naniwa »Super Stone S1« Combination Stone, Grit 3000/10 000

    With two different grits for sharpening and honing. Ideal grit mix for razors.
    €113.70 €103.00

    incl. VAT plus shipping costs

    Article No. 711356

    »Tsushima« Japanese Natural Sharpening/Honing Stone

    »Tsushima« Japanese Natural Sharpening/Honing Stone

    Very fine Japanese natural sharpening stone that is cultivated on the seabed (region Tsushima-Nagasaki). This natural sharpening stone cuts well and produces very little slurry. Also suitable for cleaning the structure of sharpening...
    €129.00

    incl. VAT plus shipping costs

    Article No. 711210

    Kunsuto Honing Stone, Grit 6000

    Kunsuto Honing Stone, Grit 6000

    Fine grain water stones for removing the burr or polishing. White aluminium oxide abrasive.
    variants
    €58.70

    incl. VAT plus shipping costs

    Article No. 711234

    Kunsuto Polishing Stone, Grit 8000

    Kunsuto Polishing Stone, Grit 8000

    Fine grain water stones for removing the burr or polishing. White aluminium oxide abrasive.
    variants
    €75.40

    incl. VAT plus shipping costs

    Article No. 711235

    Kunsuto Polishing Stone, Grit 10 000

    Kunsuto Polishing Stone, Grit 10 000

    Fine grain water stones for removing the burr or polishing. White aluminium oxide abrasive.
    variants
    €95.90 €79.00

    incl. VAT plus shipping costs

    Article No. 711236

    Nano Hone Shaping Stone, Grit 400

    Nano Hone Shaping Stone, Grit 400

    The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
    variants
    €63.70

    incl. VAT plus shipping costs

    Article No. 711226

    Nano Hone Sharpening Stone, Grit 1000

    Nano Hone Sharpening Stone, Grit 1000

    The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
    variants
    €77.50

    incl. VAT plus shipping costs

    Article No. 711227

    Nano Hone Honing Stone, Grit 6000

    Nano Hone Honing Stone, Grit 6000

    The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
    variants
    €83.60

    incl. VAT plus shipping costs

    Article No. 711228

    Nano Hone Shaping Stone, Grit 200

    Nano Hone Shaping Stone, Grit 200

    The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
    variants
    €63.70

    incl. VAT plus shipping costs

    Article No. 711249

    Nano Hone Sharpening Stone, Grit 3000

    Nano Hone Sharpening Stone, Grit 3000

    The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
    variants
    €79.90

    incl. VAT plus shipping costs

    Article No. 711256

    Nano Hone Polishing Stone, Grit 10 000

    Nano Hone Polishing Stone, Grit 10 000

    The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
    variants
    €124.90

    incl. VAT plus shipping costs

    Article No. 711257