Veritas Shop Rule
Robust marking rule made of solid extruded aluminium profile with flush ends on one side. Ideal for measuring on the machine table, for marking out internal dimensions or layout tasks. Tapered edges to avoid parallax errors that can...
€19.80
incl. VAT plus shipping costs
Article No. 732031
Woodpeckers Paolini Stainless Steel Rule, 150 mm
The wear-resistant stainless steel ruler with anodised aluminium stop is particularly precise and equipped with special details for woodworking requirements: The fine notch in the end of the rule enables exact scribing parallel to the...
€58.70
incl. VAT plus shipping costs
Article No. 718790
Woodpeckers Paolini Stainless Steel Rule, 200 mm
The wear-resistant stainless steel ruler with anodised aluminium stop is particularly precise and equipped with special details for woodworking requirements: The fine notch in the end of the rule enables exact scribing parallel to the...
€65.40
incl. VAT plus shipping costs
Article No. 718791
Woodpeckers Paolini Stainless Steel Rule, 300 mm
The wear-resistant stainless steel ruler with anodised aluminium stop is particularly precise and equipped with special details for woodworking requirements: The fine notch in the end of the rule enables exact scribing parallel to the...
€72.50
incl. VAT plus shipping costs
Article No. 718792
Woodpeckers Marking Rule
Precise, torsion-resistant marking rule with centre scale, specially developed for the requirements in the wood sector. Laser engraved graduation for precise marking Simple positioning by recessed grip Standard and centre scale for fast...
€45.90
incl. VAT plus shipping costs
Article No. 718449
Woodpeckers T-square Marking Rule, 600 mm
Thanks to the holes at 2-mm intervals, you can create very precise markings. The measuring edge is chamfered by 30° for a more precise reading and has a laser-engraved millimetre scale. On the top, the marking rule has drill holes based...
€189.00
incl. VAT plus shipping costs
Article No. 718440
Woodpeckers Straight Edge Rule
These Woodpeckers straight edge rules guarantee accurate marking. Thanks to the two different shaft widths, markings and dimensions can be exactly transferred or marked both on the board edge and on the board surface. The internal angle...
€17.20
incl. VAT plus shipping costs
Article No. 718472
Veritas Classic Bench Rule
This relatively slender aluminium rule, which resembles a classic ruler, is lightweight and easy to handle and therefore ideal for precise drawing and design tasks. Tapered edges to avoid parallax errors that can occur when marking....
€9.80
incl. VAT plus shipping costs
Article No. 732059
Bridge City AS-24v3 Adjustable Square, 610 mm
The adjustable T bevel has a split anodised aluminium head. One head piece is firmly fixed to the blade at a 90° angle; the other head piece can pivot, thanks to the lever function. This means you can adjust it to any angle. One edge of...
€220.00
incl. VAT plus shipping costs
Article No. 720724
Shinwa Precision Ruler with Flush Starts
The flush starts of the scale at both ends of the ruler facilitate the reading of measurements. Millimetre scale on the front and back, each in 0.5 and 1.0 mm graduations.
€8.90
incl. VAT plus shipping costs
Article No. 730818
Shinwa »Pickup« Precision Rules
Thanks to the upturned right end, this ruler is easy to pick up from smooth surfaces. Matted and deep-etched millimetre scale with large numbers for easy reading.
€4.40
incl. VAT plus shipping costs
Article No. 707840
Shinwa Precision Rule, 1.5 m
This flexible 1.5 m-long rule is extremely precise and exceptionally easy to read. Use it for precisely marking or measuring even large workpieces. Made of hardened spring steel, it is guaranteed to keep its shape for years to come....
€139.00
incl. VAT plus shipping costs
Article No. 717126
€5.40
incl. VAT plus shipping costs
Article No. 707263
€8.90
incl. VAT plus shipping costs
Article No. 707255
Precision Rule, Ultra-Flexible Version
Highly flexible rule for measuring and marking curved surfaces and small angles, e.g. when turning, in model construction, boat building etc.
€10.50
incl. VAT plus shipping costs
Article No. 707270
Shinwa Cutting Rule
Rigid aluminium cutting rule with hardened steel edge for protection against wear. Deep-etched millimetre scale, rubber pad.
€47.00
incl. VAT plus shipping costs
Article No. 717124
Shinwa Cutting Rule with Handle
Aluminium cutting rule with deep-etched millimetre scale on both sides and firm steel edge. The rubber pad on the underside prevents slipping and the rubber-coated handle provides protection from incision wounds while also allowing the...
€79.00
incl. VAT plus shipping costs
Article No. 707157
Flexible Rule
Flexible rule for marking, scribing or transferring curves and arches. Vinyl with a lead core, millimetre and inch scale, inking edge.
€6.80
incl. VAT plus shipping costs
Article No. 708094
Incra Precision Protractor
Removable fence Length scale with marking holes Protractor with marking holes Two protractors with marking slots for drawing a pencil Includes a 0.5 mm mechanical pencil
€35.90
incl. VAT plus shipping costs
Article No. 707522
Incra Precision Marking Rule
Length scale with marking holes Length scale with marking slots for drawing a pencil Additional 0.25 mm graduations allow extremely accurate markings
€12.20
incl. VAT plus shipping costs
Article No. 707516
Incra Precision Bend Rule
Length scale with marking holes Edge scale for transferring markings, e.g. for dovetail joints Depth scale for depth markings Comes with 0.5 mm mechanical pencil
€16.90
incl. VAT plus shipping costs
Article No. 707518
Incra Precision T-Rule
Removable fence Length scale with marking holes Length scale with marking slots for drawing a pencil Depth scale for depth markings Additional holes at increments of 2.5 tenth of a millimetre allow extremely accurate markings
€13.50
incl. VAT plus shipping costs
Article No. 707747
Hattori Precision T-Rule
Milled from solid 8 mm-thick aluminium, the marking rule is torsion-resistant and robust and allows accurate and easy scribing. The outer edges are bevelled at 30° and have easy-to-read laser-etched scales in mm. The rule has precisely...
€29.90
incl. VAT plus shipping costs
Article No. 714642
Woodpeckers Straight Edge Rule Stop
Robust stop with a locking screw for fast marking and checking repetitive measurements.
€5.90
incl. VAT plus shipping costs
Article No. 718476
Bridge City AS-24v3 Cursor
This magnetic cursor has a metric scale on one side and a V-notch on the other. It makes it easier to transfer the marking of individual dimensions onto the workpiece. Fits Bridge City Adjustable Square No. 720724 .
€22.90
incl. VAT plus shipping costs
Article No. 720725
Veritas Ruler Stop
The stopper is slid on a metal ruler or the leg of a square and fixed in the desired position with a knurled screw. The slip-proof stopper made of aluminium is suitable for rulers up to a thickness of 1.2 mm and a width of 22 - 28.5 mm.
€17.00
incl. VAT plus shipping costs
Article No. 703632
Shinwa Diameter/Radius Control Gauge
The circle segments can be used to check the radii. In combination with the lower scale, the tapered slot in the centre is used for measuring the diameter of round bars and pins. The scale on the back with 0.5 mm markings can be used to...
€13.70
incl. VAT plus shipping costs
Article No. 717542
Depth Setting Gauge for DICTUM Lathe S 175
For mounting on the tailstock. Facilitates precise depth adjustment during drilling. The drilling depth can be limited by the stopper supplied. Scale 0-100 mm. Fits DICTUM Lathe S 175 (No. 707783 , 707847 ).
€39.90
incl. VAT plus shipping costs
Article No. 707789
Shinwa Taper Gauge with Metal Protector and Clip
Taper gauge made of rustproof steel for measuring joints, grooves and internal diameters. Thanks to the metal protector with clip, the gauge can be attached to any jacket or pocket. On the back is a correction table for precise results,...
€18.90
incl. VAT plus shipping costs
Article No. 717229
Woodpeckers Story Stick Pro Caliper Arms, Offset
Ideal accessory for the Story Stick Pro Marking Rule. Thanks to these offset perspex tabs, you can transfer the markings from the workpiece straight to the circular bench saw without changing the tabs. Fits No. 718443 and 718455 . 2 pieces.
€26.00
incl. VAT plus shipping costs
Article No. 718442
€24.00
incl. VAT plus shipping costs
Article No. 718441
Shinwa Rule Stopper
Robust steel stopper with a locking screw for quick marking and examining repeat measurements.
€10.70
incl. VAT plus shipping costs
Article No. 717329
Hattori Precision Marking Rule
Removable fence made of anodised aluminium Scale with 0.25 mm graduation and round marking holes Scale with 0.5 mm graduation and marking slots for a pencil Vertical end scale up to 50 mm for depth marking Supplied with 0.5 mm mechanical...
€19.50
incl. VAT plus shipping costs
Article No. 714644
Hattori Precision Bend Rule, 180 mm
Scale with 0.5 mm graduation and round marking holes Scale with 1 mm graduation and marking slots for drawing a pencil over the edge Vertical scales up to 20 mm Supplied with 0.5 mm mechanical pencil and spare leads
€19.90
incl. VAT plus shipping costs
Article No. 714648
Hultafors Fibreglass Folding Rule
Locking into place at exactly 90°, this polyamide Swedish rule is an outstandingly versatile tool. Reinforced with fibreglass, it is extremely durable and very stable. The measuring scale is imprinted on both sides, making it easy to...
€7.80
incl. VAT plus shipping costs
Article No. 708025
Hultafors Downy Birch Folding Rule
Made of the finest Swedish downy birch, this folding rule has cult status. Despite its lightweight construction with wooden segments just 2 mm thick, it is extremely resistant to breakage. The flush-fitting pivots are made of hardened...
€7.90
incl. VAT plus shipping costs
Article No. 708024
Wood Stock Folding Rule
Every segment of this folding rule is made from a different type of wood. The front side has a scale and the rear side provides information on the distribution, characteristics and use of each type of wood. The folding rule not only...
€20.50
incl. VAT plus shipping costs
Article No. 708029
Wiha Longlife Plus Composite Folding Rule
The plastic blades with top layers made of longitudinal glass fibres absorb bending forces and ensure unmatched rigidity. This allows perfect, easy horizontal and vertical measuring with fully opened folding rule. Accuracy class II (±0.7...
€14.60
incl. VAT plus shipping costs
Article No. 717876
White Beech Folding Rule
White beech folding rule with 3.4 mm thick segments and hidden steel pivots made from hardened steel. Millimetre scale on both sides. Accuracy class III (±1.4 mm per 2 m).
€4.40
incl. VAT plus shipping costs
Article No. 708055
BMI Aluminium Folding Rule
The special aluminium alloy with matt black anodised surface and high-contrast scale ensures non-glare reading. The deep-etched numbers and graduations are extremely wear-resistant, weatherproof and resistant to chemicals, grease and...
€31.10
incl. VAT plus shipping costs
Article No. 708060
Shinwa Tape Measure »Fit Gear«, 5.5 m
Ergonomic carbon steel tape measure with robust ABS plastic housing and additional nylon cover. Double sided scaling with extra large digits, with vertical arrangement on the back. The damped tape feed protects the mechanism, a precise...
€16.20
incl. VAT plus shipping costs
Article No. 721359
Shinwa »Fit Gear« Tape Measure, 5.5 m, with Magnet
Ergonomic carbon steel tape measure with robust ABS plastic housing and additional nylon cover. Double sided scaling with extra-large digits, with vertical arrangement on the back. The cushioned tape feed protects the mechanism, a...
€20.90
incl. VAT plus shipping costs
Article No. 730910
Shinwa Telescopic Measure
This telescopic measure is an indispensable aid for measuring clear space during interior refinishing or masonry work. Large numbers allow the scale to be read even in poor lighting conditions. The measure is equipped with two extendable...
€54.00
incl. VAT plus shipping costs
Article No. 717517
Shinwa Triangle Scale, Aluminium, 150 mm
Handy triangular scale for easy conversion when working with different scales. Made of solid aluminium, black matt finish with deeply etched millimetre scale.
€12.50
incl. VAT plus shipping costs
Article No. 730858
Hultafors Tape Measure Ergonomic
Ergonomic tape measure with high-impact ABS plastic case and rubber-coated button. Wear-resistant blade with a highly accurate inkjet-printed scale. Smooth blade return with anti-wear function, firm lock reduces tape movement. For easy...
€17.20
incl. VAT plus shipping costs
Article No. 701635
Hultafors Tape Measure, 30 m, Fibreglass
Fibreglass tape measure with robust ABS housing and unique one-hand operation for optimal handling. Fibreglass measuring tapes are strong, flexible and can be bent without any problem. The tape measure resists moisture, temperature...
€72.50
incl. VAT plus shipping costs
Article No. 745271
Hultafors Talmeter Tape Measure
This revised version of the Hultafors bestseller will impress you with its precise functionality and indestructible mechanics. An additional blade that can be opened out with a sliding tab, and a second scale, allow exact measuring of...
€23.00
incl. VAT plus shipping costs
Article No. 708036
Stanley Tape Measure
Retractable tape measure with locking mechanism and high-impact housing. Easily fits into any pocket or, thanks to the metal clip, can be worn on a belt. The polymer coating makes the tape highly wear-resistant and the anti-reflective...
€4.90
incl. VAT plus shipping costs
Article No. 707287