Sonstige

Products from Sonstige

Buy Sonstige products online at DICTUM.

Multi-Clip

Patented traction clamp for securing wooden parts for assembly or glueing, bundling cables, rods or wires, securing ladders, posts or pipes, etc. Two or more clamps can be combined to accommodate larger objects. Made of high-strength...

€3.90

incl. VAT plus shipping costs

Article No. 705870

See details

Revolving Punch Pliers

For punching leather, cardboard, rubber, plastic etc. Six punches with diameters of 2 / 2.5 / 3 / 3.5 / 4 and 4.5 mm. The diameter is displayed in the view window. Pressed, anti-skid corded steel shanks with stop. 270 g.

€15.90

incl. VAT plus shipping costs

Article No. 711995

See details

Automatic Punch Set with 26 Letters and Numbers

With this set you can easily mark wood and non-hardened metal. The knurled brass handle works with spring-load, you do not need a hammer. Simply insert a letter or number bit into the hexagon socket and press down. Letters are approx. 4...

€17.20

incl. VAT plus shipping costs

Article No. 708324

See details

Ethanol (Alcohol) 96 %, 1 l

This pure alcohol is ideal for dissolving and diluting shellac and other resins, as well as for cleaning brushes. It is denatured and therefore not suitable for human consumption. Thanks to the special denaturing agent used, our alcohol...

€10.20

incl. VAT plus shipping costs

Article No. 810039

See details

Arkansas Multiform Slipstones, 4-Piece Set

In a wooden case. Flat-pointed straight back, flat-pointed round back, knife-shaped, flat-skewed rounded back. Translucent Arkansas (extra-fine). 58 x 23 x 6 mm.

€43.70

incl. VAT plus shipping costs

Article No. 705260

See details

Natural Whetstone for Scythes, Rozsutec

Natural stone from the Slovakian Mala-Fatra Mountains. Grit 300-400. High density and very small material removal, for drawing out the cutting edge For honing during cutting For scythe cuttings in soft grasses and herbs (wet grassland...

€14.90

incl. VAT plus shipping costs

Article No. 705582

See details

Turpentine Oil

One of the most valuable solvents on a natural basis, ideal for thinning vegetable oils, oil paints and varnishes as well as for making glazes and polishes with resins, waxes or pigments. This low-viscosity oil, obtained by...

€4.40

(Content: €44.00 / 1 litre)

incl. VAT plus shipping costs

Article No. 705293

See details

Pure Orange Oil

Low-viscosity orange oil from the peel of the sweet orange, ideal for thinning vegetable-based protective wood oils, and its grease dissolving properties make it a useful household cleaner. Mixing 1-5 % of it with a linseed or tung oil...

€13.90

(Content: €55.60 / 1 litre)

incl. VAT plus shipping costs

Article No. 705277

See details

Astra Shellac

Bleached, highly transparent shellac, for clear polishes.

€20.70

(Content: €82.80 / 1 kg)

incl. VAT plus shipping costs

Article No. 810030

See details

Fiber-Lining

€2.70

incl. VAT plus shipping costs

Article No. 250351

See details

Brass Eyelet, Normal Shaft, Inch Thread, Violin, 4 x 4 mm

Brass Eyelets, Normal Shaft, Inch Thread

10-Pce Set

€10.60

incl. VAT plus shipping costs

Article No. 250961

See details

Brass Eyelets, Thick Shaft, Metric Thread

10-Pce Set

€13.00

incl. VAT plus shipping costs

Article No. 250976

See details

Brass Eyelets, Normal Shaft, Metric Thread

10-Pce Set

€10.60

incl. VAT plus shipping costs

Article No. 250981

See details

Standard Soundpost Setter, Violin, Viola

Nickel-plated, plastic grip.

€12.10

incl. VAT plus shipping costs

Article No. 700101

See details

Scissor-Shaped Soundpost Setter, Violin, Viola

Made of brass.

€6.10

incl. VAT plus shipping costs

Article No. 700105

See details

Purfling Channel Cleaner

Hardened tool steel blade with hardwood handle.

€11.90

incl. VAT plus shipping costs

Article No. 700606

See details

Ball Handle for Fingerplanes

The end with M5 thread fits into adjusted holes in Herdim planes with screw caps and wooden wedges (32, 40 and 50 mm overall length) and Herdim fingerboard plane. The ball end enables effortless, precise and easy driving of the plane...

€14.30

incl. VAT plus shipping costs

Article No. 702519

See details

Fingerboard Pads

For an even distribution of clamping pressure when gluing fingerboards in place. Pads with cork lining to prevent risk of surface damage of the neck. The radiuses of both pads perfectly adjusted to the true radiuses of a violin neck and...

€9.80

incl. VAT plus shipping costs

Article No. 735810

See details

Laurin Carbon Steel Blade

Made of carbon steel (80CrV2) for extreme sharpness, not rustproof. The blades, which are hardened to 58 HRC, still require polishing and sharpening. Rustic forging skin.

€10.10

incl. VAT plus shipping costs

Article No. 830920

See details

Quick-Release Chuck ECO with Morse Taper DIN 238, #2 MT

Quick-Release Chucks ECO with Morse Taper DIN 238

Good value for money. Quick-release chuck for craft and hobby use. For use on lathes, routers and vertical drilling machines. Self-tightening and high-force clamping. No chuck key, tighten and release effortlessly by hand. Jaw opening...

€43.50

incl. VAT plus shipping costs

Article No. 705658

See details

Bending Strap for Bending Iron

For pressing the ribs against the bending iron. Made of highly flexible, 0.3 mm thick stainless steel fitted with a wire handle on each end.

€27.90

incl. VAT plus shipping costs

Article No. 704325

See details

Slick

Slick for making beam joints and for finishing work. Double-layered, well-proportioned blade with a cutting edge of White Paper Steel. Handle made of Japanese red oak.

€273.00

incl. VAT plus shipping costs

Article No. 710802

See details

Handiwork Metal 150

Fine saw for non-hardened metals and hard plastics. The rubber handle provides a comfortable and secure grip. Replaceable blade. Can also be used with blade for wood (No. 712716 ).

€18.50

incl. VAT plus shipping costs

Article No. 712715

See details

Analogue Calliper

Bevelled scale in mm and inch for parallax-free reading. Deep-etched stainless steel, slide with 0.05 mm vernier and locking screw.

€28.80

incl. VAT plus shipping costs

Article No. 707303

See details

Redheart 150 x 150 x 50 mm

The incomparable shades of colour with partly purple and golden brown streaks make this intensive blazing red wood, also called »Chakte Kok«, especially attractive. To retain its rich hues, the hard, fine-pored wood should be treated...

€28.20

incl. VAT plus shipping costs

Article No. 831379

See details

Mother-of-Pearl, Eyes, white

Circular pieces.

€3.30

incl. VAT plus shipping costs

Article No. 830813

See details

English Sliding Bevel, Walnut

Stock made of walnut with brass fittings. Angles are fixed through an adjustment screw, which is not in the way like a lever when marking or transferring angles. Blued and hardened steel blade.

€29.90

incl. VAT plus shipping costs

Article No. 707327

See details

Drill Stops, 7-Piece Set

Slide-on rings with locking screws for wood and metal drills. They serve as simple and effective depth stops when drilling. Ø 3.2 / 4.8 / 6.4 / 8 / 9.5 / 11.1 and 12.7 mm, including hex key for locking screw.

€9.70

incl. VAT plus shipping costs

Article No. 701879

See details

Ryoba Restauro 125

This compact Japanese saw with two different tooth spacings and an ultra-thin blade is the first choice for the finest cuts in tight spaces and cutting off dowels or other projecting wooden parts flush with the surface. Beech handle.

€21.90

incl. VAT plus shipping costs

Article No. 712123

See details

Inspection Mirror

For inspecting hollow bodies and areas that are hard-to-reach.

€17.30

incl. VAT plus shipping costs

Article No. 707111

See details

Precision Scriber

Japanese precision scribers with very finely ground, extra-hard tips, for marking metal, glass, ceramics, and plastic. The extremely sharp points can also be used for customizing probes and other small objects.

€18.30

incl. VAT plus shipping costs

Article No. 717118

See details

Blade Blank Ajikiri, 3 Layers

For small chopping and rocker knives. Blue Paper Steel core, with black forging skin. Double bevel. Not rustproof. The blade must be polished and sharpened.

€39.90

incl. VAT plus shipping costs

Article No. 719539

See details

Marking Knife »Kogatana« Standard, Double Bevel, Blade Width 3 mm

Marking Knives »Kogatana« Standard, Double Bevel

These hand-forged blades made of double- or triple-layered steel are exceptionally sharp, wear-resistant and easy to resharpen. 58 HRC.

€21.50

incl. VAT plus shipping costs

Article No. 710205

See details

Japanese Planting Trowel

Lightweight compact professional hand spade with a thin, yet robust stainless steel blade.

€9.30

incl. VAT plus shipping costs

Article No. 717923

See details

Ebony, 1st Quality, 300 x 50 x 15 mm

Ebony, one of the hardest, densest woods in the world, is often used in turnery, cabinet making, restoration work and musical instrument making for parts which need to either be particularly beautiful or resistant to wear, e.g. keys,...

€14.80

incl. VAT plus shipping costs

Article No. 831021

See details

All-steel Mini Chisels, 6-Piece Set

For fine restoration work and model making. Stainless steel hardened to approx. 50 HRC, coarse finish.

€18.40

incl. VAT plus shipping costs

Article No. 700430

See details

Benzoin

Benzoin processed into paint is traditionally used as a glossy polished covering on shellac surfaces or high-quality oil-varnished surfaces. The pure benzoin almond offered here is obtained by cutting into the bark of Siamese Styrax...

€9.90

(Content: €99.00 / 1 kg)

incl. VAT plus shipping costs

Article No. 810023

See details

Precision Rule, Ultra-Flexible Version

Highly flexible rule for measuring and marking curved surfaces and small angles, e.g. when turning, in model construction, boat building etc.

€10.50

incl. VAT plus shipping costs

Article No. 707270

See details

HSS Chisel for Cabinetmakers, Blade Width 6 mm

HSS Chisels for Cabinetmakers

Ideal for restoration, on-site carpentry and cabinetmaking. Normal blade length available in all standard chisel sizes.

€49.00

incl. VAT plus shipping costs

Article No. 718931

See details

Glue Container, Stainless Steel, 250 ml

€10.90

incl. VAT plus shipping costs

Article No. 736006

See details

Wooden Clamp

Fast-acting, lightweight clamps. The clamping pressure is adjustable via a lever. Protective, cork-lined jaws. Ratcheting steel bar, beech jaws. Max. clamping pressure approx. 160 kg.

€14.80

incl. VAT plus shipping costs

Article No. 705753

See details

Precision Knife Edge Ruler

The best way of checking if a surface is flat is with this straight edge, using the light-gap method. The rules are bevelled on the measurement edge and have a textured rubber grip. Stainless steel, accuracy grade 00 in accordance with...

€18.60

incl. VAT plus shipping costs

Article No. 707290

See details

Diamond Needle Files, Polycrystalline, 10-Piece Set

Flat 9.5 x 2.5 mm, half-round 9 x 3 mm, square 4.5 mm, three-square 6 mm, round 5 mm, warding 9.5 x 2.5 mm, knife-shaped 9 x 3.5 mm, barrette 9.5 x 4 mm, crossing 7.5 x 3.5 mm, crossing 5.7 x 4.5 mm. Grit D107.

€29.90

incl. VAT plus shipping costs

Article No. 711044

See details

Japanese Puzzle Box »Himitsu Bako«, 4-sun*

Himitsu Bako boxes are certainly among the most intriguing hand-crafted wooden objects made in Japan. At first glance, they appear to be nothing more than simple boxes with intricately inlaid surfaces. Try to open them and you will...

€59.00

incl. VAT plus shipping costs

Article No. 820035

See details

Acrylic Pen Blank, Mother of Pearl/Black

Ideal for writing utensils and minor turning work. Since acrylic has good stability, it can be processed without a sleeve if the thickness is suitable.

€5.30

incl. VAT plus shipping costs

Article No. 831459

See details

Pumice Powder

Fine polishing powder for intermediate grinding, e.g. in French polishing or as a pore filler (is transparent with shellac). Pure silicate rocks. Applied with water or liquid paraffin.

€3.60

(Content: €14.40 / 1 kg)

incl. VAT plus shipping costs

Article No. 810050

See details

Hooks and Picks, 6-Piece Set

Stainless steel dental picks and hooks with fine needle-point tips for picking up, adjusting, marking, or cleaning small objects.

€19.90

incl. VAT plus shipping costs

Article No. 700431

See details

German Carpenter's Square

The standard square for every carpenter is made of rustproof spring steel and has a seamless cut. An etched scale on both sides of the square can be used for external and internal measuring. The holes, spaced 5 mm apart, on the short...

€25.90

incl. VAT plus shipping costs

Article No. 707279

See details

1 2 3 of 83