Lie-Nielsen Honing Guide

Solid side clamping honing guide, made of stainless steel, with a bronze bearing. The different...
Solid side clamping honing guide, made of stainless steel, with a bronze bearing. The different removable jaws allow for the clamping of chisels with a blade width of under 5 mm, of mortise chisels, short plane blades and skew blades. The honing guide comes with the standard pair of jaws that fit most chisel and blade types. This honing guide has been designed specifically for Lie-Nielsen blades and chisels but is also suited for tools from other manufacturers. The 12 mm wide roller in combination with the use of different pressure points on the blade during sharpening allow for slightly cambered blades. Standard jaws included.
     
    more
    less
    Further details on the manufacturer

    Lie-Nielsen

    Lie-Nielsen
    • Max. blade width 70 mm
    • Max. blade thickness 7 mm
    Article no. 701211
    Brand Lie-Nielsen
    Ready to ship, delivery time 3-4 workdays within Germany
    €189.90 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Type Price Quantity
    Lie-Nielsen Honing Guide
    Lie-Nielsen Honing Guide

    Article number 701211
      €189.90
     
    Plenty of accessories and spare parts

    Accessories

    Long Jaws for Lie-Nielsen Honing Guide

    Long Jaws for Lie-Nielsen Honing Guide

    The long jaws fit all spokeshave blades and match the following Lie-Nielsen planes: Low-angle jack rabbet plane, bench rabbet plane, cabinet maker's scraper No. 85, shoulder plane. These jaws are reversible. The short end hones a bevel...
    €55.80

    Article No. 701213

    Chisel Jaws for Lie-Nielsen Honing Guide

    Chisel Jaws for Lie-Nielsen Honing Guide

    The chisel jaws fit 3 mm (1/8 inch) and 4.5 mm (3/16 inch) Lie-Nielsen bevel edge chisels as well as 6-19 mm (1/4 to ¾ inch) standard bevel edge chisels.
    €55.80

    Article No. 701214

    Mortise Chisel Jaws for Lie-Nielsen Honing Guide

    Mortise Chisel Jaws for Lie-Nielsen Honing Guide

    The mortise chisel jaws fit all Lie-Nielsen mortise chisels, as well as the 25 mm (1 inch) bevel edge chisel.
    €55.80

    Article No. 701215

    18° Skewed Jaws for Lie-Nielsen Honing Guide, Right

    18° Skewed Jaws for Lie-Nielsen Honing Guide, Right

    The 18° skewed jaws fit Lie-Nielsen skew block plane.
    variants
    €55.80

    Article No. 701217

    30° Skewed Jaws for Lie-Nielsen Honing Guide, Right

    30° Skewed Jaws for Lie-Nielsen Honing Guide, Right

    The 30° skewed jaws fit Lie-Nielsen side rabbet planes.
    variants
    €55.80

    incl. VAT plus shipping costs

    Article No. 701219

     

    Passend dazu