Herdim reamers / drills

variants
€54.00

incl. VAT plus shipping costs

Article No. 730501

variants
€64.90

incl. VAT plus shipping costs

Article No. 730502

Herdim Peg Reamer, Violin

Herdim Peg Reamer, Violin

Affordable old pattern design works perfectly for reaming holes 7.5-8.3 mm. Material: Steel
€35.60

incl. VAT plus shipping costs

Article No. 730213

variants
€99.80

incl. VAT plus shipping costs

Article No. 730601

variants
€69.90

incl. VAT plus shipping costs

Article No. 730503

Herdim Endpin Reamer, Cello, Straight Edges, Uncoated

Herdim Endpin Reamers, Cello

(Also suited for cello peghole bushings)
variants
€169.00

incl. VAT plus shipping costs

Article No. 730701

variants
€249.00

incl. VAT plus shipping costs

Article No. 730702

Herdim Taper Pin, Violin, Taper 1/20

Herdim Taper Pins

For setting ring-shaped peghole bushings and for smoothing the sur-faces of the holes. Made of tool steel, precision-ground conical pin, without cutting edges.
variants
€48.30

incl. VAT plus shipping costs

Article No. 730525

Herdim Calibrated Stop Ring for Peg Reamers, 7.8 mm

Herdim Calibrated Stop Ring for Peg Reamers

Stop ring for reaming peg holes.
variants
€7.10

incl. VAT plus shipping costs

Article No. 730218

Herdim Peg Ending Tool

Herdim Peg Ending Tool

For peg length and peg end adjustment. Works universally with all pegs with diameter up to 8.5 mm. Material: Aluminum/Stainless Steel The tool is designed to ease the elaboration and refinement of the peg ending. A standard tapering of...
€58.40

incl. VAT plus shipping costs

Article No. 730214

Herdim Tone Hole Reamers HSS, 8 x 9,25 mm

Herdim Tone Hole Reamers, spiral toothed

Cleanly cut tone holes improve both the tonal clarity and appearance of flutes, clarinets and oboes. The spiral cutting edges of the Herdim drills allow perfectly round holes with finely finished surfaces to be cut, even in wood with...
variants
€53.60

incl. VAT plus shipping costs

Article No. 730407

Herdim System Peg Reamer with 1/4 Hexagonal Shaft, Violin

Herdim System Peg Reamers with 1/4 Hexagonal Shaft

The Herdim peghole reamers for violin and cello pegs can be used with the beautiful wooden handles in spindle shape. The drills can also be driven with a cordless power drill. In this case the cutting action is especially smooth and...
variants
€99.90

incl. VAT plus shipping costs

Article No. 730412

Herdim System Smoothing Reamer with 1/4 Hexagonal Shaft

Herdim System Smoothing Reamer with 1/4 Hexagonal Shaft

The cutting edges of the regular Herdim reamers are bevel ground to a sharp edge, resulting in an aggressive cutting action. This smoothing reamer however has cutt­ing edges which are on one side slightly rounded, according to the radius...
€99.90

incl. VAT plus shipping costs

Article No. 730413

Herdim System Calibrated Stop Ring for Peg Reamers, Violin 4/4 Thin

Herdim System Calibrated Stop Rings for Peg Reamers

Using the calibrated stop rings on Herdim reamers enables you to trim the pegholes to a definite diameter matching precisely the final diameter of the Herdim standardized pegs. The same applies to the conical holes of endbuttons and...
variants
€3.60

incl. VAT plus shipping costs

Article No. 730430

Padouk Handle for Reamers with Hexagonal Shaft, Spindle Shape, Violin

Padouk Handles for Reamers with Hexagonal Shaft, Spindle Shape

The 1/4" magnetic handle holds the reamer safely when manually operated without power tool.
variants
€8.90

incl. VAT plus shipping costs

Article No. 700398

Herdim Peg Shaper and Reamer, 22-Piece Set

Herdim Peg Shaper and Reamer, 22-Piece Set

22-piece set of tools for fitting pegs of all sizes from 1/16 violin - 4/4 cello, as well as for making peghole bushings. Peg shapers (one of each) No. 730101 , -102, -201, -202, -203; 8 repl. blades No. 730100 , 6 replacement blades No....
€799.00

incl. VAT plus shipping costs

Article No. 730300