Tormek T-4

»Tormek Original« sharpening wheel, grit 220, Ø 200 x 40 mm; leather honing wheel Ø 145 x 26 mm;...
NEW! Ultimate precision, solid zinc-cast top
The TORMEK T-4, an advanced version of the T-3 model, takes precision and stability to a new level. Both the vertical and horizontal bases for the universal support and the integrated carrying handle are made in the same zinc casting and therefore permanently joined together. The motor and main shaft are fixed to the cast top, resulting in a solid construction which significantly improves accuracy during sharpening.
»Tormek Original« sharpening wheel, grit 220, Ø 200 x 40 mm; leather honing wheel Ø 145 x 26 mm; solid zinc casting top with universal support with fine adjustment (horizontal and vertical settings). Impact-resistant ABS plastic housing. 230 V, 120 W, 120 rpm, 8 kg.
Includes:
  • Stone grader (SP-650)
  • Angle gauge (WM-200)
  • Honing compound (PA-70)
  • Handbook (HB-10)
  • Instruction video (DVD-1)
  • Voucher for free participation in a one-day workshop of your choice or a discount of 100 € for a multi-day workshop
Comes with Tormek manual in German language.
Tormek Sharpening System
Proven for many years and constantly perfected wet-working sharpening machines are the basis of the ingenious Tormek sharpening system. A range of jigs, which can be mounted on the universal support, makes the sharpening of any cutting tool easier. Tormek enables the achievement of exact cutting geometry and consistent results for chisels, turning tools, knives, shears or machine tools. Also suitable for workshops and instructional settings because of safe operation - no sparks are produced and it has an overload safety clutch.
The offered grinding wheels assure short sharpening times under all conditions in combination with the greatest possible tool protection. The front end can also be used for plane honing. The leather honing wheel removes burrs quickly and leaves a perfectly polished cutting edge. Robust construction with solid housing and sliding water container.
A summary of the advantages of Tormek sharpening machines
Longer working life of T-8 and T-4:
  • Stainless steel spindle with EzyLock-System for easier stone assembling
  • Solid zinc cast housing with integrated vertical and horizontal support
  • Better motor insulation

Additional advantages of T-8:
  • Electrophoretic dip painted casing, zinc cast housing frame and robust ABS plastic sides for better corrosion protection
  • Silent running, maintenance free motor, designed for continuous operation, 25 000 hour life
  • Improved water container with screw lift for easy positioning, overspill rim, drip-off plate, magnetic swarf collector and magnetic cleaning scraper
  • Two additional rubber feet to drain off water on the case
     
    more
    less
    Further details on the manufacturer
    Additional links

    Available downloads:

    Tormek Machine Models
     

    Further information

    Our Services Tips & Tricks Workshops
     
    • T-4 features a 7 year warranty (when used for commercial, industrial or educational purpose the warranty is 2 years)
    • T-8 features a 7 year warranty (upon registration also for commercial, industrial or educational purpose)
     
     
    Discover product in our flip catalogue:
    Discover product in our flip catalogue:
     
     
    If you buy a Tormek T-8 or T-4 from DICTUM, you can choose between a voucher for free participation in a one-day workshop of your choice or a discount of 100 € for a multi-day workshop. The voucher amount cannot be set off against the purchase of products.
     
    Article no. 705195
    Brand Tormek
    Ready to ship today, delivery time 2-3 workdays within Germany
    €349.00 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Type Price Quantity
    Tormek T-4
    Tormek T-4

    Article number 705195
      €349.00
     
    Plenty of accessories and spare parts

    Accessories

    Tormek Handbook, Grinding and Sharpening Edge Tools (HB 10)

    Tormek® Handbook, Grinding and Sharpening Edge Tools (HB 10)

    By Torgny Jansson. General introduction to the basics of sharpening and detailed instructions for use of the Tormek (every machine comes with handbook).
    €23.20

    incl. VAT plus shipping costs

    Article No. 705199

    DICTUM Japanese Sharpening Wheel, Grit 1000

    DICTUM® Japanese Sharpening Wheel, Grit 1000

    Suitable for HSS as well as carbon steel and double-layered steel. Hard bond for highly effective polishing with little abrasion.
    €122.80

    incl. VAT plus shipping costs

    Article No. 716040

     

    Replacement parts

    Tormek Original Replacement Wheel SG-200, Grit 220

    Tormek Original Replacement Wheel SG-200, Grit 220

    This hard-bond stone is suitable for pre-sharpening double-layered blades as well as chrome-vanadium steel and HSS.
    €92.90

    incl. VAT plus shipping costs

    Article No. 705196

    Plastic bearing

    Plastic bearing

    Fits No. 705228 , 705236 and 705247 .
    €2.50

    incl. VAT plus shipping costs

    Article No. 800012

    Tormek Settling Disk

    Tormek Settling Disk

    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €1.50

    incl. VAT plus shipping costs

    Article No. 800035

    Button Switch for Tormek

    Button Switch for Tormek

    The switch is available in two types - depending on the year the machine was built, as a toggle switch or a button switch. Check whether a toggle switch no. 800046 or a button switch no. 8000504 is installed on your machine. You must...
    €20.20

    incl. VAT plus shipping costs

    Article No. 800504

    Tormek Pro Angle Master WM-200

    Tormek Pro Angle Master WM-200

    For setting the grinding angle and checking the bevel geometry. Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.
    €19.30

    incl. VAT plus shipping costs

    Article No. 705240

    Tormek Drive Wheel with Rubber Band for T-3 and T-4

    Tormek Drive Wheel with Rubber Band for T-3 and T-4

    Suitable for Tormek T-3, T-4 and old series models.
    variants
    €29.90

    incl. VAT plus shipping costs

    Article No. 800008

    Knurled Nut for Tormek

    Knurled Nut for Tormek

    Fits Tormek T-3, T-4, T-7 and T-8.
    €5.90

    incl. VAT plus shipping costs

    Article No. 800343

    Tormek Eyelet for Cover No. 800040

    Tormek Eyelet for Cover No. 800040

    Suitable for Tormek T-3, T-4, T-7 and old series models.
    €3.90

    incl. VAT plus shipping costs

    Article No. 800042

    Tormek Water Container WB-200

    Tormek Water Container WB-200

    Suitable for Tormek T-3, T-4 and old series models.
    €13.60

    incl. VAT plus shipping costs

    Article No. 705241

    Tormek Diamond Tip ADV D 50

    Tormek Diamond Tip ADV D 50

    For the diamond stone dresser. Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.
    €35.90

    incl. VAT plus shipping costs

    Article No. 705217

    Tormek Driving Wheel Safety Lock Pin

    Tormek Driving Wheel Safety Lock Pin

    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €1.50

    incl. VAT plus shipping costs

    Article No. 800037

    Tormek Instruction DVD

    Tormek Instruction DVD

    „Edge-tool sharpening the Tormek way“. (Comes with every machine). 23 min., DVD 2.0, PAL. In German, English, French and Swedish.
    €13.30

    incl. VAT plus shipping costs

    Article No. 705446

    Tormek Settling Disk

    Tormek Settling Disk

    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €2.30

    incl. VAT plus shipping costs

    Article No. 800034

    Tormek Handbook, Nassschleifen und Abziehen von Schneidwerkzeugen (HB 10)

    Tormek Handbook, Nassschleifen und Abziehen von...

    By Torgny Jansson. General introduction to the basics of sharpening and detailed instructions for use of the Tormek (every machine comes with handbook).
    €23.20

    incl. VAT plus shipping costs

    Article No. 705211

    Tormek Honing Compound PA-70

    Tormek Honing Compound PA-70

    For leather honing wheels No. 705212 and 705197 . 70 g.
    €9.90

    (Content: €14.14 / 100 g)

    incl. VAT plus shipping costs

    Article No. 705213

    Knurled Screw fastening Rest for Tormek

    Knurled Screw fastening Rest for Tormek

    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €5.20

    incl. VAT plus shipping costs

    Article No. 800041

    Tormek Wedge, Universal Rest

    Tormek Wedge, Universal Rest

    Suitable for Tormek T-3, T-4 and old series models.
    €5.30

    incl. VAT plus shipping costs

    Article No. 800045

    Tormek Cover

    Tormek Cover

    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €4.40

    incl. VAT plus shipping costs

    Article No. 800047

    Tormek Universal Support US-103 for T-3 and T-4

    Tormek Universal Support US-103 for T-3 and T-4

    With fine adjustment suitable for Tormek T-3, T-4 and old series models.
    €34.30

    incl. VAT plus shipping costs

    Article No. 705202

    variants
    €38.40

    incl. VAT plus shipping costs

    Article No. 705197

    Main Shaft Bearing for Tormek Supergrind 2000 / 1200

    Main Shaft Bearing for Tormek Supergrind 2000 / 1200

    Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.
    €3.90

    incl. VAT plus shipping costs

    Article No. 800010

    Tormek Assembling Wave

    Tormek Assembling Wave

    Suitable for Tormek T-3 and old series models.
    €4.90

    incl. VAT plus shipping costs

    Article No. 800043

    Tormek Horizontal Base XB-100

    Tormek Horizontal Base XB-100

    For Tormek T-7 and T-3.
    €20.90

    incl. VAT plus shipping costs

    Article No. 705226

    Tormek Main Shaft Set MSK-200

    Tormek Main Shaft Set MSK-200

    For easier fitting of the grinding stones the main shaft is now supplied with a left-hand thread. The new EzyLock nut can be tightened by hand and securely clamps the stone. Set consists of main shaft with left-hand thread, EzyLock nut,...
    variants
    €38.70

    incl. VAT plus shipping costs

    Article No. 800501

     

    DICTUM Low-speed Grinder DS 150 L

    €209.00

    incl. VAT plus shipping costs

    Article No. 720782

    DICTUM Double-wheeled Grinder DS 150 S

    €109.00

    incl. VAT plus shipping costs

    Article No. 720795

    Tormek T-8 incl. Hand Tool Kit HTK-706

    €749.00 €709.00

    incl. VAT plus shipping costs

    Article No. 716055

    Tormek T-8

    €639.00

    incl. VAT plus shipping costs

    Article No. 716034