Tapered saw blade
This backsaw with a large saw blade is perfect for deep cuts in the direction of the grain, such as cutting mortise and tenon joints. The well-balanced saw cuts efficiently on the push stroke and without jamming up to a depth of 9 cm.
Western saws of exceptional quality, optimised for specific uses. The blade teeth of Swedish spring steel are first milled and set on the machine and then fine-tuned by hand. Each saw undergoes an intensive cutting test before it leaves the factory. Handles of figured maple, secured with traditional split-nut screws, and a solid brass back complete these premium saws.
Advantages of tapered saw blades
- Less weight on the saw blade
- Centre of mass is closer to the handle for a more balanced saw
- Faster and more aggressive cutting. If the back of the saw is held horizontally during cutting, each tooth is lower than the one before, resulting in faster stock removal
- Blade length 405 mm
- Overall length 540 mm
- Cut depth 83 / 92 mm
- Blade thickness 0.5 mm
- Setting 0.8 mm
- Triangular teeth for rip cuts 2.3 mm
Discover product in our flip catalogue:
Article out of stock - Article early May 2018 available
€193.00 per piece(s)
Prices incl. VAT
For Japanese and Western saws with adjustable depth stop for settings of 0.7-2.0 mm. Different set measurements can be adjusted by turning the depth-stop plate with its spiral-shaped increasing bevel. HSS plunger, aluminium body
Triangular files with round edges for sharpening European-style saws. The round edges maintain the slightly rounded gullet between the saw’s teeth and thus prevent cracks between the teeth (sharp angles crack more easily than curved...