Klemmsia Hold-down Clamp Adapter, Basic, Shaft 19 mm, Clamping Height 150 mm

The body of the hold-down clamp is the same as that of the Klemmsia clamps. It can be used for...
The body of the hold-down clamp is the same as that of the Klemmsia clamps. It can be used for clamping down workpieces or converted into a standard clamp by means of the attached screw mechanism in the perforated stud system. It can also be used with C-slot profile rails thanks to the supplied groove screws (13 mm wide with 8 mm groove). The 40 mm high hornbeam block fitted to the lower end acts as a stopper and prevents the hold-down clamp from slipping. The included extension has the same height as the fitted hornbeam block, which allows even very thin workpieces to be firmly clamped to the workbench. The clamp features slip-resistant, surface-protecting cork pads and is therefore ideal for:
  • Holding down workpieces
  • Clamping round workpieces without damaging the profile
  • Conversion into a standard clamp
Regulation of the clamping pressure via a cam lever. Movable clamp arm. Zinc-plated steel bar. Made of German hornbeam.
Shaft length 95 mm.
     
    more
    less
    Further details on the manufacturer

    Klemmsia

    • Jaw depth 110 mm
    • Length 300 mm
    • Shaft diameter 19 mm
    • Clamping height 150 mm
    Article no. 708125
    Brand Klemmsia
    Ready to ship, delivery time 5-8 workdays within Germany
    €41.90 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Article
    Jaw depth
    Length
    Shaft diameter
    Clamping height
    Price
    Quantity

    Article no.: 708125

    Jaw depth: 110 mm
    Length: 300 mm
    Shaft diameter: 19 mm
    Clamping height: 150 mm
    Price: €41.90
    Quantity:
     

    Article no.: 708126

    Jaw depth: 110 mm
    Length: 420 mm
    Shaft diameter: 19 mm
    Clamping height: 250 mm
    Price: €42.20
    Quantity:
     
    Plenty of accessories and spare parts

    Accessories

    Klemmsia Clamping Arm, Standard, Jaw Depth 150 mm

    Klemmsia Clamping Arm, Standard, Jaw Depth 150 mm

    Fits No. 708125 , 708126 , 708127 , 708128 , 708133 .
    variants
    €8.40

    incl. VAT plus shipping costs

    Article No. 708130

    Klemmsia Slot Nut with External Thread

    Klemmsia Slot Nut with External Thread

    Practical slot nut for Klemmsia Hold-down Clamp Adapter Basic and Basic Mini. Suitable for PantoRouter No. 720556 , 720557 , 720757 , 720755 ; DICTUM Multifunction Table No. 707796 ; DICTUM T-Track No. 707764 , 707765 , 707766 ....
    €5.10

    incl. VAT plus shipping costs

    Article No. 708119

    Klemmsia Clamping Arm 90°, Throat Depth 110 mm

    Klemmsia Clamping Arm 90°, Throat Depth 110 mm

    Maximum clamping force at 90° position of the eccentric lever. Fits No. 708125 , 708126 , 708127 , 708128 , 708133 .
    €9.90

    incl. VAT plus shipping costs

    Article No. 708159

     

    Replacement parts

    Klemmsia Clamping Arm, Standard, Jaw Depth 110 mm

    Klemmsia Clamping Arm, Standard, Jaw Depth 110 mm

    Fits No. 708125 , 708126 , 708127 , 708128 , 708133 .
    variants
    €7.80

    incl. VAT plus shipping costs

    Article No. 708129

    Extension for Klemmsia Hold-down Clamp

    Extension for Klemmsia Hold-down Clamp

    Fits No. 708125 , 708126 , 708127 , 708128 .
    €5.50

    incl. VAT plus shipping costs

    Article No. 708132

     
    Suitable for

    Suitable for

    Tabletop for DICTUM MFT, Hole Pattern & T-slot, Multi-layer Beech

    Tabletop for DICTUM MFT, Hole Pattern & T-slot, Multi-layer Beech

    Replacement top with hole grid for DICTUM Multifunction Table PRO. Eight 8 mm T-slots and 24 holes with a diameter of 20 mm enable bench dogs, track clamps, slot nuts, hold down clamps, and clamping devices to be precisely positioned at...
    €239.00

    incl. VAT plus shipping costs

    Article No. 714290