Water Container for DICTUM Water-cooled Grinder
Plastic water container for hanging on the side plate of the DICTUM Water-cooled Grinder No. 707799.
€14.90
incl. VAT plus shipping costs
Article No. 830583
DICTUM Water-cooled Grinder SM250, Basic-Grind Grinding Wheel
A water-cooled grinder is the perfect sharpening system when it comes to versatility, simple and safe handling, precise cutting edge geometry, consistent angles, tool protection and short setting and sharpening times. Whether chisels,...
€699.00
incl. VAT plus shipping costs
Article No. 707799
Setting Gauge for Sharpening Guides, Basic
For setting the bevel angles for sharpening guides on water-cooled grinders or double-wheeled grinders. The grinding wheel diameter and the desired bevel angle are set on the gauge and then transferred to the chisel or plane blade...
€19.90
incl. VAT plus shipping costs
Article No. 721043
DICTUM Support Arm for Sharpening Guides
The support arm with 12 mm diameter fits all common sharpening guides with 12 mm holder. It is the connection between the machine and sharpening guide. When sharpening without a support, it serves as a hand rest. A knurled nut allows...
€49.90
incl. VAT plus shipping costs
Article No. 720807
DICTUM Stone Grader
The stone grader can be used to change or influence the grit of your grinding wheel. A 220 grit grinding wheel can be changed to a fine grit of approx. 1000 by pressing the fine side of the stone grader onto the running wheel. To reset...
€19.90
incl. VAT plus shipping costs
Article No. 721040
Drive Wheel with Silicone Band for DICTUM Water-cooled Grinder
Outer diameter 185 mm, inner diameter 12 mm. Fits DICTUM Water-cooled Grinder No. 707799.
€19.90
incl. VAT plus shipping costs
Article No. 830587
Leather Honing Wheel for DICTUM Water-cooled Grinder
After sharpening the blades on the grinding wheel, you can switch to a leather honing wheel. In combination with the Polishing and Honing Paste (No. 705055 ), this removes burrs quickly and reliably and leaves a perfectly polished edge....
€34.90
incl. VAT plus shipping costs
Article No. 830592
External Clamping Flange for DICTUM Water-cooled Grinder
This clamping flange is placed on the grinding wheel on the DICTUM Water-cooled Grinder (No. 707799). It distributes the contact pressure of the knurled nut. Internal/external diameter 12/50 mm.
€12.90
incl. VAT plus shipping costs
Article No. 830595
DICTUM Präzisionswinkel 90°
Dieser einzigartige Präzisionswinkel vereint die Eigenschafften von einem Prüfwinkel und einem Anreißwinkel . Bislang nur als separate Werkzeuge erhältlich, bietet der DICTUM Präzisionswinkel exakte Messergebnisse sowie präzises und...
€79.00
incl. VAT plus shipping costs
Article No. 708208
DICTUM Präzisionswinkel 90°
Dieser einzigartige Präzisionswinkel vereint die Eigenschafften von einem Prüfwinkel und einem Anreißwinkel . Bislang nur als separate Werkzeuge erhältlich, bietet der DICTUM Präzisionswinkel exakte Messergebnisse sowie präzises und...
€99.00
incl. VAT plus shipping costs
Article No. 708219
DICTUM Präzisionswinkel 90°
Dieser einzigartige Präzisionswinkel vereint die Eigenschafften von einem Prüfwinkel und einem Anreißwinkel . Bislang nur als separate Werkzeuge erhältlich, bietet der DICTUM Präzisionswinkel exakte Messergebnisse sowie präzises und...
€119.00
incl. VAT plus shipping costs
Article No. 708280
Tabletop for DICTUM MFT, Multi-layer Beech, Factory Seconds
Replacement top with hole grid for DICTUM Multifunction Table PRO. Eight 8 mm T-slots and 24 holes with a diameter of 20 mm enable bench dogs, track clamps, slot nuts, hold down clamps, and clamping devices to be precisely positioned at...
€149.00
incl. VAT plus shipping costs
Article No. 714292
€58.00
incl. VAT plus shipping costs
Article No. 704268
Veritas Rabbet Plane
With this Veritas plane you can produce precise rabbets up to a width of 40 mm and a depth of 20 mm. Large knurled brass screws provide easy and fast adjustment to the fence and depth stop. The blade can be easily aligned and set, it is...
€349.00
incl. VAT plus shipping costs
Article No. 704272
Workpiece Protectors for DICTUM Bench Dogs, 2 Pair
Matching silicone O-ring, Ø 18 x 2.5 mm for DICTUM bench dogs. Fits Aluminium Bench Dogs (Nos. 714689 , 714688 ) and Stainless Steel Bench Dogs (Nos. 729542 , 728773 , 728774 ).
€3.90
incl. VAT plus shipping costs
Article No. 991065
DICTUM Trekking Axe, Black Edition
This axe has everything required for functional aesthetics: Compact/functional shape Easy-to-sharpen, indestructible axe head Durable handle that defies the elements Good design The result: A hand-forged axe made of C60 carbon steel with...
€119.00
incl. VAT plus shipping costs
Article No. 760206
DICTUM Bandsäge BS 200-08, Sonderverkauf
Die komplette Maschine inkl. Türen ist aus Stahlblech gefertigt. Ein zusätzlicher Stahlrahmen verstärkt die Konstruktion, die bei der kleinen Maschine eine höhere Blattspannung zulässt, Vibrationen verringert und bessere...
€249.00
incl. VAT plus shipping costs
Article No. 721418
€3.50
incl. VAT plus shipping costs
Article No. 820522
€3.50
incl. VAT plus shipping costs
Article No. 820523
€2.80
incl. VAT plus shipping costs
Article No. 820551
DICTUM Sanding Belt Guide for Bandsaw
Sawing and sanding with just one machine not only saves investment costs, but also space in the workshop. The DICTUM BS 200-08 Bandsaw (No. 727446 ) can also be operated with sanding belts using the sanding belt guide. Switching from the...
€39.50
incl. VAT plus shipping costs
Article No. 714776
DICTUM Clamp Rack for All-steel Screw Clamps
This clamp rack made of powder-coated sheet steel for all-steel clamps is the ideal solution for storing up to twelve clamps safely and always within easy reach. Neatly organised on the wall, the clamps are stowed away to save space and...
€29.90
incl. VAT plus shipping costs
Article No. 711691
DICTUM Clamp Rack for All-steel Screw Clamps
This clamp rack made of powder-coated sheet steel for all-steel clamps is the ideal solution for storing up to twelve clamps safely and always within easy reach. Neatly organised on the wall, the clamps are stowed away to save space and...
€57.50
incl. VAT plus shipping costs
Article No. 711694
DICTUM Extraction Unit SSA 5200 Twin
With an extraction capacity of 5280 m³/h and a total chip bag volume of 400 litres, this extraction system offers top performance. A 400 volt motor with 1.5 kW power and the precisely balanced steel fan with optimised blade shape ensure...
€1,199.00
incl. VAT plus shipping costs
Article No. 725036
DICTUM Extraction Unit SA 1140
This compact dust extraction unit is particularly suitable for use as a mobile single extraction system. With a footprint of only 0.3 m², the system fits almost anywhere and can be quickly relocated on its four caster wheels. Equipped...
€499.00
incl. VAT plus shipping costs
Article No. 725033
DICTUM Extraction Unit SA 2200
An ideal extraction system for small workshops where several machines need to be connected. Two 100 mm suction ports and an extraction capacity of 2220 m³/h allow for simultaneous extraction from multiple machines*. The extraction unit...
€679.00
incl. VAT plus shipping costs
Article No. 725034
DICTUM Extraction Unit SSA 3500
Powerful and efficient extraction system for large extraction and chip volumes. The high performance in terms of air volume flow (m³/h) and negative pressure (Pa), along with the large capacity of the chip collection bag, make this...
€999.00
incl. VAT plus shipping costs
Article No. 725035
Veritas »Chair Devils« Beading Tool
The »Chair Devils« beading tools are indispensable for chair, stair and boat building. The concave, semi-circular scraper blade achieves a smoother, geometrically more precise surface compared to abrasive machining. The sturdy steel body...
€84.90
incl. VAT plus shipping costs
Article No. 732063
Veritas »Chair Devils« Beading Tool
The »Chair Devils« beading tools are indispensable for chair, stair and boat building. The concave, semi-circular scraper blade achieves a smoother, geometrically more precise surface compared to abrasive machining. The sturdy steel body...
€84.90
incl. VAT plus shipping costs
Article No. 732064
Veritas »Chair Devils« Beading Tool
The »Chair Devils« beading tools are indispensable for chair, stair and boat building. The concave, semi-circular scraper blade achieves a smoother, geometrically more precise surface compared to abrasive machining. The sturdy steel body...
€84.90
incl. VAT plus shipping costs
Article No. 732065
DICTUM Carnauba Wax for Woodturning
Carnauba wax is used on the running lathe to create highly glossy surfaces. The pure wax comes in the form of easy-to-process bars and has no foreign substances added. The natural wax from the Brazilian carnauba palm is known for its...
€6.90
incl. VAT plus shipping costs
Article No. 714795
DICTUM Multifunction Table PRO, T-slot 8 mm, Multi-layer Beech
For exact, reproducible, fast and easy sawing or milling of any angle. Whether in the hole grid or in the tabletop’s 8 mm T-slots or in the encircling T-slot on the aluminium frame for infinitely variable angle settings with the DICTUM...
€1,239.00
incl. VAT plus shipping costs
Article No. 714291
DICTUM »Kyougi« Real Wood Paper, Notepad, 75 x 100 mm, 50 Sheets
Japanese notepad with paper-thin pine sheets with characteristic wood grain, natural texture and the unique scent of pine wood. According to ancient tradition, Kyougi paper is thinly planed by hand with sharp plane blades from one single...
€9.90
incl. VAT plus shipping costs
Article No. 731817
Veritas Classic Bench Rule
This relatively slender aluminium rule, which resembles a classic ruler, is lightweight and easy to handle and therefore ideal for precise drawing and design tasks. Tapered edges to avoid parallax errors that can occur when marking....
€9.80
incl. VAT plus shipping costs
Article No. 732059
Veritas Classic Bench Rule
This relatively slender aluminium rule, which resembles a classic ruler, is lightweight and easy to handle and therefore ideal for precise drawing and design tasks. Tapered edges to avoid parallax errors that can occur when marking....
€12.20
incl. VAT plus shipping costs
Article No. 732060
Veritas Classic Bench Rule
This relatively slender aluminium rule, which resembles a classic ruler, is lightweight and easy to handle and therefore ideal for precise drawing and design tasks. Tapered edges to avoid parallax errors that can occur when marking....
€14.40
incl. VAT plus shipping costs
Article No. 732061
Veritas Classic Bench Rule
This relatively slender aluminium rule, which resembles a classic ruler, is lightweight and easy to handle and therefore ideal for precise drawing and design tasks. Tapered edges to avoid parallax errors that can occur when marking....
€17.70
incl. VAT plus shipping costs
Article No. 732062
Base Plate for DICTUM Double-wheeled Grinder
Matching base plate to connect the Wolverine sharpening system to the DICTUM Low-speed Grinder DS 150 L. The Oneway Wolverine sharpening system (No. 702170 ) was specially developed for sharpening woodturning tools. On double-wheeled...
€39.90
incl. VAT plus shipping costs
Article No. 731699
Table Inserts for SSO 140, 6-piece Set
Three round and three oval table inserts, for different grinding spindle diameters. Fits DICTUM Spindle Grinder SSO 140 (Nos. 727403 , 727457 , 727445 ).
€17.90
incl. VAT plus shipping costs
Article No. 830536
DICTUM Polishing and Honing Paste
Ideal for honing knife and tool blades. Effective and gentle removal of the burr in combination with e.g. leather honing wheels or strops. Cleans and polishes metal parts, gives a brilliant shine and protects surfaces from weathering....
€9.50
(Content: €118.75 / 1 kg)
incl. VAT plus shipping costs
Article No. 705055
DICTUM »Junior« Akagashi Universal 150
The cutting performance and accuracy of the Akagashi »Junior« impresses beginners as well as young advanced artisans. For cuts across, along and diagonal to the grain. Handmade ergonomic handle of oiled Japanese red oak Special raker...
€46.90
incl. VAT plus shipping costs
Article No. 731801
€21.40
incl. VAT plus shipping costs
Article No. 731802
Quick-change Saw Blade for DICTUM Akagashi »Junior« Hardwood 145
Fits DICTUM Handle for Quick-Change Saw Blade 115 mm, »Junior« Akagashi (No. 731804 ).
€16.80
incl. VAT plus shipping costs
Article No. 731803
DICTUM Handle for Quick-Change Saw Blade 115 mm, »Junior«...
Fits saw blade Nos. 731802 , 731803 and 731832 .
€29.90
incl. VAT plus shipping costs
Article No. 731804
DICTUM Sharpening Buddy
Multifunctional jig for sharpening chisels and plane blades. Control device, bevel setter and setting gauge with fence (for setting the blade protrusion on sharpening jigs) combined in one gauge. The perfect companion for sharpening and...
€29.90
incl. VAT plus shipping costs
Article No. 714649
Aluminium Capacity Clamps for Veritas Magnetic Saw Guide
Two capacity clamps for the T-slot profile of the magnetic saw guide. Suitable for material thicknesses up to 51 mm.
€49.90
incl. VAT plus shipping costs
Article No. 704294
Replacement Tape Strips for Veritas Magnetic Saw Guide
Two pairs of self-adhesive replacement strips, length 203 mm.
€4.70
incl. VAT plus shipping costs
Article No. 704295
DICTUM Carving Tools, Gouge/V-Parting Tools, Short Bent
Similar to the long bent form, these gouges are also used for deep, curved shapes. The even stronger bend of the gouge allows you to carve transitions in even deeper areas and to create small radiuses and arches.
€30.80
incl. VAT plus shipping costs
Article No. 701749