Compasses and accessories

Red Rose Reproductions Divider, Leg Length 127 mm

Red Rose Reproductions Dividers

Traditionally, a divider is the ideal marking tool for a variety of tasks, including transferring measurements, dividing distances, and creating geometric shapes. The purist design, easy handling and outstanding quality of this divider...
variants
€188.00

incl. VAT plus shipping costs

Article No. 725030

Red Rose Reproductions Attachment with Pencil Holder

Red Rose Reproductions Attachment with Pencil Holder

Attachment with stainless steel pencil holder - for drawing arcs and circles. The conversion is simple and requires no tools. Instead of the screwed compass point, the attachment is fixed with a knurled screw. The attachment fits both...
€48.50

incl. VAT plus shipping costs

Article No. 725032

Veritas Beam Compass

Veritas Beam Compass

Practical stainless steel beam compass for marking large dimensions. The standard use with only one beam allows the sketching of circles with a diameter of 76-610 mm. With the two included additional beams, the diameter can be easily...
€85.60

incl. VAT plus shipping costs

Article No. 717539

Veritas Log Scribe »Scriber«

Veritas Log Scribe »Scriber«

For transferring contours to round stock, especially for marking corner joints (log home building). Two built-in levels, two steel pins (with a pointed tip for compass work and a rounded tip for smooth scribing) and a pencil holder....
€136.00

incl. VAT plus shipping costs

Article No. 707269

French Spring Dividers, Shaft Length 150 mm

French Spring Dividers

Elegant French spring dividers made of gunmetal finished steel, with hardened points, quick-acting screws.
variants
€21.20

incl. VAT plus shipping costs

Article No. 707150

French Spring Dividers with Pencil Holder, Shaft Length 150 mm

French Spring Dividers with Pencil Holder

Elegant French spring dividers made of gunmetal finished steel, with hardened tips, quick-acting screws.
variants
€29.60

incl. VAT plus shipping costs

Article No. 707151

Wing Divider »L'Arc«, Two Tips

Wing Dividers »L'Arc«

Since as far back as the Middle Ages, the compass has been resplendent on the emblem of the carpenters' guild along with the square and the plane. Since the wing compass allows secure locking of the set measurement, it is considered an...
variants
€42.90

incl. VAT plus shipping costs

Article No. 707376

Wing Divider »L'Arc« with Carpenter’s Pencil Holder, 310 mm

Wing Dividers »L'Arc«, 310 mm

Since as far back as the Middle Ages, the compass has been resplendent on the emblem of the carpenters' guild alongside the square and the plane. Since the wing compass allows secure locking of the set measurement, it is considered an...
variants
€68.30

incl. VAT plus shipping costs

Article No. 707727

Veritas Beam Compass Heads

Veritas Beam Compass Heads

For making beam compasses of any size. Two aluminium heads with pencil holders and steel points, one of which is eccentric to facilitate fine adjustment. Brass hardware. Thin square timbers are suitable as shafts.
€66.70

incl. VAT plus shipping costs

Article No. 707231

Veritas Trammel Points

Veritas Trammel Points

For making beam compasses. The points score clear lines on any wood, and are also effective on aluminium, brass, bronze and unhardened steel. With the points removed, the trammel bodies double as square gauges, clamping onto a square to...
€31.30

incl. VAT plus shipping costs

Article No. 701859

Parallel Marker

Parallel Marker

Ideal for marking built-in elements, joints, door casings, etc. Guide it along the reference surface and the adjustable pencil draws the marking line. Can also be used as a compass, thanks to the steel pin in the lower shaft. Plastic....
€9.60

incl. VAT plus shipping costs

Article No. 716152

Pantograph

Pantograph

The pantograph (Greek for «all-round writer«) transfers drawings, contours and profiles in the same, larger or smaller scale from the plan to the workpiece and thus saves a detour via computer or photocopier. With the help of the milled...
€37.80

incl. VAT plus shipping costs

Article No. 708095

M. Power Tools Point.2.Point

M. Power Tools Point.2.Point

For laying out equal spacings, e.g. dovetails, dowels, etc. Extends to 600 mm and can be locked in any position to transfer up to seven position markings (six equal spacings) to the workpiece. Stainless steel, brass screws. Not suitable...
€31.20

incl. VAT plus shipping costs

Article No. 707267

M. Power Tools Triscribe Marking Heads

M. Power Tools Triscribe Marking Heads

Convert a try square into a precision marking gauge, or a flat ruler (up to 2.5 mm thick) into a practical measuring compass. Two marking heads, hardened needle insert, cutter insert with replacement blade, can also be used with pencil...
€23.90

incl. VAT plus shipping costs

Article No. 707268

Shinwa Scriber

Shinwa Scriber

Japanese log scriber for marking saddle notches in log house construction. Excellent value for money. Removable spirit level, rounded tip with copy function, fine tuning via spring tension. You can insert the pencil in the openings of...
€129.00

incl. VAT plus shipping costs

Article No. 707228

»mylogscriber« Log Scriber

»mylogscriber« Log Scriber

For precise transfer of contours, especially for round timber corner joints (on log buildings). The »mylogscriber« impresses with its curved, glass bead blasted stainless steel tubes in combination with a wide variety of high quality...
€222.00

incl. VAT plus shipping costs

Article No. 730823

UJK 3-in-1 Trammel Set

UJK 3-in-1 Trammel Set

This 3-in-1 trammel set can be used in three different ways: 1. Use both pins to mark out or scribe an arc. 2. Remove one pin and fitting the included HB pencil. 3. Replace one pin with a paper and card cutter blade which is also...
€49.00

incl. VAT plus shipping costs

Article No. 745274

UJK Trammel Set Extension Bar

UJK Trammel Set Extension Bar

Extension bar for UJK 3-in-1 trammel set (No. 745274 ). 64 cm long, gives a useful total length of 128 cm. Made of torsion-resistant aluminium profile with an easy-to-read metric scale.
€37.50

incl. VAT plus shipping costs

Article No. 745275

€16.40

incl. VAT plus shipping costs

Article No. 717187

€17.60

Article No. 717199

Multifunctional Marking T-Rule, 650 mm

Multifunctional Marking T-Rule, 650 mm

This T-rule is a versatile tool for precise work. Its integrated functions enable precise scribing, accurate drilling and the marking of radii thanks to its compass function. A particular highlight is that the fence can be removed at the...
€169.00

incl. VAT plus shipping costs

Article No. 714769

Wing Divider, Polished Stainless Steel

Wing Divider, Polished Stainless Steel

Marking divider made of polished stainless steel, for parallel marking, transferring measurements, dividing distances or marking circles on leather. Maximum opening: 100 mm, shaft length: 70 mm.
€18.70

incl. VAT plus shipping costs

Article No. 745243