Zwingen Musikinstrumentenbau

Herdim Crack Clamp without Rubber Jaws, Jaw Opening 180 mm

Herdim Crack Clamps

The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
variants
€44.90

incl. VAT plus shipping costs

Article No. 735812

variants
€19.00

incl. VAT plus shipping costs

Article No. 735720

Herdim Lower Block Clamp, Violin, Viola

Herdim Lower Block Clamps

For gluing the ribs to the lower block without disassembling the instrument. Once inserted into the instrument, the steel pivot automatically flips into the cross position as the screw is turned. Hardwood body lined with cork.
variants
€6.70

incl. VAT plus shipping costs

Article No. 735800

Herdim Crack-Gluing Clamp

Herdim Crack-Gluing Clamp

Small specialty tool for gluing cracks. Galvanized steel. (Can be tightened with a M2 hex wrench, not included). The blocks lining the crack are cut off after gluing. Opening 12 mm, Depth 5 mm.
€4.90

incl. VAT plus shipping costs

Article No. 705934

Herdim Lining Clamp

Herdim Lining Clamp

For glueing of lining. Zinc-coated steel. Depth 15 mm, Ø 5 mm.
€5.70

incl. VAT plus shipping costs

Article No. 703202

Herdim F-Hole Clamp, Jaw Opening 100 mm

Herdim F-Hole Clamp, Jaw Opening 100 mm

The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
€43.80

incl. VAT plus shipping costs

Article No. 735809

Herdim Edge Clamp

Herdim Edge Clamp

For repairing cracks close to the edges. Exceptionally strong titanium coloured aluminum alloy body. Precision double guide rods, adjustable base height, direct pressure application upon closure.
€145.50

incl. VAT plus shipping costs

Article No. 705852

Herdim Rib Corner Clamp, Violin, Viola (4 spindles)

Herdim Rib Corner Clamps

For regluing rib corners. After attaching the clamp to the rib corner area, pressure can be applied directly to both sides of the rib corner using the small perpendicular spindles.
variants
€139.90

incl. VAT plus shipping costs

Article No. 735610

Herdim Hand-Forged Repair Clamps, 7-Piece Set

Herdim Hand-Forged Repair Clamps, 7-Piece Set

The set contains one each of No. 735702 , 735704 , 735707 , 735714 , 735715 , 735718 and 735719 .
€239.00

incl. VAT plus shipping costs

Article No. 735754

Herdim U-Shaped Crack Clamp, Jaw Depth 30 mm

Herdim U-Shaped Crack Clamps

The 4-screw system can be adjusted to any geometry of any crack. Even cracks which are significantly deformed can be brought back together by this versatile tool. Rubber padded plates and silicone pads (No. 820068 not included) enable...
variants
€83.30

incl. VAT plus shipping costs

Article No. 735851

Herdim Aluminium Crack Clamp, Violin, Viola, Jaw Opening 110 mm

Herdim Aluminium Crack Clamps

The Herdim aluminium crack clamps are not only extremely low weight, they also show twisting clamping jaws which are flexible and perfectly accommodate to the contours of the instrument. The risk of chipping the edges when repairing a...
variants
€43.30

incl. VAT plus shipping costs

Article No. 735830

Herdim Aluminium Crack Clamps, Violin, Viola, 4-Piece Set

Herdim Aluminium Crack Clamps

The Herdim aluminium crack clamps are not only extremely low weight, they also show twisting clamping jaws which are flexible and perfectly accommodate to the contours of the instrument. So the risk of chipping the edges when repairing a...
variants
€163.00

incl. VAT plus shipping costs

Article No. 735834

Herdim 3-Arm Crack Clamp without Rubber Jaws, Jaw Opening 240 mm

Herdim 3-Arm Crack Clamps

The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
variants
€85.60

incl. VAT plus shipping costs

Article No. 735819

Herdim Double-Sided Crack Clamp without Rubber Jaws, Jaw Opening 280 mm

Herdim Double-Sided Crack Clamps

The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
variants
€76.90

incl. VAT plus shipping costs

Article No. 735818

Herdim F-Hole Clamp without Rubber Jaws, Jaw Opening 155 mm

Herdim F-Hole Clamps

The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
variants
€43.80

incl. VAT plus shipping costs

Article No. 735817

Herdim Repair Clamps, 7-Piece Set

Herdim Repair Clamps, 7-Piece Set

The set contains one each of No. 735720 , 735721 , 735722 , 735723 , 735724 , 735725 und 735726 . These clamps feature all requirements for repair clamps used on fine and fragile structures: High stiffness versus low weight - especially...
€149.10

incl. VAT plus shipping costs

Article No. 735730

Herdim Neck Drilling Jig

Herdim Neck Drilling Jig

A peghole bore either in a new violin or in one after bushing must be perfectly perpendicular to the longitudinal axis of the instrument. The drilling jig adopts both an instrument or single neck and ensures a perfect perpendicular...
€70.30

incl. VAT plus shipping costs

Article No. 703934

Herdim Over the Rib Repair Clamp, Jaw Depth 122 mm

Herdim Over the Rib Repair Clamps

Some repairs as soundpost patch, opened seam and crack repair must be done on the back plate over the ribs. Clamping the cleats and patches is then, due to the rib height quite a tricky task. Using these over the rib steel clamps is an...
variants
€41.60

incl. VAT plus shipping costs

Article No. 735731

Herdim Holder for Peg Drilling, Violin

Herdim Holders for Peg Drilling

The unique template will guide drilling of the hole perfectly perpendicular and centered on the shaft of any peg.
variants
€14.20

incl. VAT plus shipping costs

Article No. 730117

Herdim Hand-Forged Repair Clamp, Jaw Depth 28 mm

Herdim Hand-Forged Repair Clamps

These traditional clamps, designed for the repair of musical instruments, are excellently suited to the construction of models thanks to their compact size. The two larger versions have a wide grip, and are therefore also used by...
variants
€33.80

incl. VAT plus shipping costs

Article No. 735718

Aluminium Repair Clamp, Jaw Depth 85 mm

Aluminium Repair Clamps

Low weight, torsion-resistant clamps made of hammer-finished, cast aluminium. Offset base, steel screw and ball-jointed swivel pad.
variants
€18.90

incl. VAT plus shipping costs

Article No. 705890

Aluminium Repair Clamps, 5-Piece Set

Aluminium Repair Clamps, 5-Piece Set

Low weight, torsion-resistant clamps made of hammer-finished, cast aluminium. Offset base, steel screw and ball-jointed swivel pad.
€105.00

incl. VAT plus shipping costs

Article No. 705894

Silicone Protective Pad for Herdim Repair Clamps, Ø 12 mm

Silicone Protective Pads for Herdim Repair Clamps

High-quality soft silicone pads that are pulled over the movable pressure plate of repair clamps to optimally protect even the most sensitive varnished surfaces from marring. Fits Herdim Repair Clamps and Herdim Hand-Forged Repair Clamps.
variants
€3.30

incl. VAT plus shipping costs

Article No. 820068

Mini Parallel Clamp

Mini Parallel Clamp

Strong steel clamp for repairing cracks. Galvanised steel.
€14.80

incl. VAT plus shipping costs

Article No. 705723

Edge Clamp with Single Screw

Edge Clamp

Brass, finely machined.
variants
€10.50

incl. VAT plus shipping costs

Article No. 705856

Top Clamp, Violin, Viola

Top Clamps

For gluing down the top underneath the fingerboard, cork-lined aluminum clamping pad.
variants
€85.80

incl. VAT plus shipping costs

Article No. 705820

Fingerboard Pads, Violin, Viola

Fingerboard Pads

For an even distribution of clamping pressure when gluing fingerboards in place. Pads with cork lining to prevent risk of surface damage of the neck. The radiuses of both pads perfectly adjusted to the true radiuses of a violin neck and...
€9.80

incl. VAT plus shipping costs

Article No. 735810

Steel Lining Clamp

Steel Lining Clamp

High clamping pressure, plastic-lined jaws.
€4.30

incl. VAT plus shipping costs

Article No. 705861

variants
€4.70

incl. VAT plus shipping costs

Article No. 735650

Rubber Cork Pads, Ø 8 mm, 10 Pieces

Rubber Cork Pads

Delicate surfaces of fine musical instruments require cushioned clamping. Different sizes of these self adhesive 1 mm thick cork cushions offer versatility to cushion any conceiveable tool and clamp. Simple removing makes possible to...
variants
€4.50

incl. VAT plus shipping costs

Article No. 735655

Repair Holder, Violin, Viola

Repair Holder, Violin, Viola

Aluminium framework mounted on an acrylic glass base, 28 x 35 cm. Lower bout clamp. Max. opening of body clamp 250 mm.
€134.90

incl. VAT plus shipping costs

Article No. 707010

Shaping Mould for Tops and Backs, Violin

Shaping Moulds for Tops and Backs

Traditional tool for simplify the work on the top and back. Heavy plywood base, 5 adjustable screws to hold the plate.
variants
€54.00

incl. VAT plus shipping costs

Article No. 703931

Bow Rehairing Device

Bow Rehairing Device

Traditional device for safe holding the bow during rehairing process. In length-adjustable tip holder, all holding devices cork padded for secure operation.
€98.90

incl. VAT plus shipping costs

Article No. 703933