Accessories for grinders

DICTUM Sharpening Device for BS 50-55

DICTUM Sharpening Device for BS 50-55

The precisely milled cross slide allows the arm to be moved in two directions at the same time in one operation. Almost all common jigs, e.g. for straight cutting edges, gouges, grinding tables, etc., can be attached and quickly...
€129.00

incl. VAT plus shipping costs

Article No. 729398

DICTUM Sharpening Device for Convex Bevels

DICTUM Sharpening Device for Convex Bevels

Sharpening knives with convex bevels, as is often the case with outdoor or bushcraft knives, is usually only possible by hand. The additional belt guide roller of the BS 50/55 Belt Grinding Device (No. 711284 ) guides the belt in a...
€69.00

incl. VAT plus shipping costs

Article No. 729794

DICTUM Mounting Base for Sharpening Device for Convex Bevels

DICTUM Mounting Base for Sharpening Device for Convex Bevels

Used as a connecting link between the Sharpening Device for Convex Bevels (No. 729794 ) and the Belt Grinding Device BS 50/55 (No. 711284 ).
€13.90

incl. VAT plus shipping costs

Article No. 729795

Clamping Flange, Pair, Bore 12.7 mm (½ Inch)

Clamping Flange, Pair, Bore 12.7 mm (½ Inch)

Made of 3 mm galvanised sheet steel. Outer diameter 60 mm. Fits double-wheeled grinders with 12.7 mm shaft.
€2.90

incl. VAT plus shipping costs

Article No. 830419

Oneway Wolverine Sharpening System, Basic Set

Oneway Wolverine Sharpening System, Basic Set

The Oneway sharpening system was specially designed for woodturning tools but, with its two different jigs, is also suitable for chisels and plane blades as well as other tools. The arm is fitted to a double-wheeled grinder using a base...
variants
€89.20

incl. VAT plus shipping costs

Article No. 702170

Oneway Wolverine Sharpening System, Vari Grind

Oneway Wolverine Sharpening System, Vari Grind

The Oneway sharpening system was specially designed for woodturning tools but, with its two different jigs, is also suitable for chisels and plane blades as well as other tools. The arm is fitted to a double-wheeled grinder using a base...
variants
€53.00

incl. VAT plus shipping costs

Article No. 702171

Grinding Rest for Looking-through Grinding Machine

Grinding Rest for Looking-through Grinding Machine

Suitable grinding rest for looking-through grinding machine. Stable and precise construction Angle adjustment with scale -90° to +90° Height adjustable and rotating Tool and hand rest in one Can be retrofitted with a few simple steps...
€134.30

incl. VAT plus shipping costs

Article No. 706958

LED Precision Optics with Table Clamp

LED Precision Optics

Precision optics with 3 dioptres (1.75x magnification), real glass lense, adjustable LED light and lens cover. Additional hinge allows the lamp head with 125 mm optical glass and 90 LEDs to be pivoted independently of the gooseneck...
€103.00

incl. VAT plus shipping costs

Article No. 720583

Clamping Sleeve for Adaptor Flange

Clamping Sleeve for Adaptor Flange

For mounting CBN grinding wheels Ø 150 mm e.g. on Low-speed Grinder DS 150 L (No. 720782 ). By means of this sleeve, the adaptor flange for CBN grinding wheels can be conveniently clamped to the machine shaft. The clamping sleeve bridges...
€5.10

incl. VAT plus shipping costs

Article No. 707837

Flexible Shaft for DICTUM Mini Double-wheeled Grinder DS 75

Flexible Shaft for DICTUM Mini Double-wheeled Grinder DS 75

Retrofit kit for DICTUM Mini Double-wheeled Grinder DS 75 (No. 728793 ). Shaft length 92 cm.
€9.90

incl. VAT plus shipping costs

Article No. 728796

Flexible Shaft for DICTUM Mini Polishing Motor PM 75

Flexible Shaft for DICTUM Mini Polishing Motor PM 75

Retrofit kit for DICTUM Mini Polishing Motor PM 75 (No. 728794 ). Shaft length 92 cm.
€21.40

incl. VAT plus shipping costs

Article No. 728797

Polishing Disc Mount, Tapered, Pair

Polishing Disc Mount, Tapered, Pair

The tapered thread makes it possible to clamp polishing discs with bore diameter 3-13 mm. For machine shafts with diameter 10 mm. Overall length 92 mm.
€10.60

incl. VAT plus shipping costs

Article No. 728798

Holding Arbors with Clamping Flanges, Pair

Holding Arbors with Clamping Flanges, Pair

One left-hand and one "right-hand holding arbor with two flange discs each. For clamping polishing and grinding discs. Arbor diameter 10 mm x 35 mm. For machine shafts with diameter 10 mm.
€9.90

incl. VAT plus shipping costs

Article No. 728800

Holding Arbors, Pair

Holding Arbors, Pair

One left-hand and one right-hand holding arbor each, incl. clamping nut. For clamping polishing and grinding discs, grinding rollers, etc. Arbor diameter 10 mm x 63 mm. For machine shafts with diameter 10 mm.
€13.40

incl. VAT plus shipping costs

Article No. 728801

Grinding Roller

Grinding Roller

For mounting on the right-hand shaft of the polishing motor. Laminated rubber roller with holding arbor. Incl. sanding sleeves. For machine shafts with diameter 10 mm.
€14.90

incl. VAT plus shipping costs

Article No. 728802

Sanding Sleeve, Ø 50 mm

Sanding Sleeve, Ø 50 mm

Fits grinding roller for DICTUM Mini Polishing Motor (No. 728802 ). Sleeve length 50 mm.
€0.90

incl. VAT plus shipping costs

Article No. 728803

Circular Brush

Circular Brush

Pointed 3-row circular brush with plastic core. For pre- and post-polishing. For tapered polishing disc mounts.
€3.90

incl. VAT plus shipping costs

Article No. 728808

DICTUM Universal Handpiece HD-6.5

DICTUM Universal Handpiece HD-6.5

Handpiece with three-jaw chuck in particularly resilient design for rough work with the bending shaft, large milling, drilling or grinding tools. Max. speed 8500 rpm. Clamping range 1-6.5 mm. Comes with chuck key.
€40.70

incl. VAT plus shipping costs

Article No. 728809

DICTUM Universal Handpiece UH-6

DICTUM Universal Handpiece UH-6

Three-jaw chuck for milling, drilling or grinding work with the bending shaft. Max. speed 20 000 rpm. Clamping range 1-6 mm. Comes with chuck key.
€42.80

incl. VAT plus shipping costs

Article No. 728810

DICTUM Universal Handpiece UH-4

DICTUM Universal Handpiece UH-4

Three-jaw chuck for milling, drilling or grinding work with the bending shaft. Max. speed 20 000 rpm. Clamping range 1-4 mm. Comes with chuck key.
€40.70

incl. VAT plus shipping costs

Article No. 728811

Replacement Carbon Brushes for Mini Double-wheeled Grinder and Polishing Motor

Replacement Carbon Brushes for Mini Double-wheeled Grinder and...

Fits DICTUM Mini Double-wheeled Grinder (No. 728792 , 728793 ) and DICTUM Mini Polishing Motor (No. 728794 , 728795 ).
€2.70

incl. VAT plus shipping costs

Article No. 728813

DICTUM Flexible Shaft with Gear Rim Drill Chuck, 6 mm

DICTUM Flexible Shaft with Gear Rim Drill Chuck

Work flexibly and effectively in hard-to-reach places - no problem with the flexible shaft with a total length of 130 cm. A large handle with hand guard safely covers the rotating drill chuck and provides a good grip. Shaft tools such as...
variants
€32.10

incl. VAT plus shipping costs

Article No. 728820

Splash Guard for DICTUM Mini Polishing Motor PM 75

Splash Guard for DICTUM Mini Polishing Motor PM 75

Thanks to the high speeds of polishing motors, fibres of the polishing discs and polishing paste are spun away. The sheet steel housing with folding splash guard prevents contamination on workbenches or walls. A must for work outside...
€42.60

incl. VAT plus shipping costs

Article No. 728822

Scroll Chuck 6.5 mm

Scroll Chuck 6.5 mm

For mounting on the right-hand shaft. Comes with chuck key. For machine shafts with diameter 10 mm. Clamping range 1-6.5 mm.
€12.90

incl. VAT plus shipping costs

Article No. 728799

Reducer Rings 20/10 mm, 1 pair

Reducer Rings, Pair

For reducing the bore diameter of grinding and polishing wheels. Made of plastic.
variants
€2.00

incl. VAT plus shipping costs

Article No. 729027

DICTUM Short Tool Jig SW-36

DICTUM Short Tool Jig SW-36

For short carving blades, hollow gouges and V-parting tools or small woodturning gouges A plastic cap on the pressure screw avoids pressure marks on the tools. Clamping width max. 36 mm.
€15.50

incl. VAT plus shipping costs

Article No. 721041

DICTUM Universal Tool Rest STU-110

DICTUM Universal Tool Rest STU-110

Support table for sharpening flat cutting edges such as flat chisels and scraper blades, parting tools and inshaves. The 107 x 88 mm support enables a wide range of tools to be guided safely. Suitable for sharpening machines with guide...
€17.90

incl. VAT plus shipping costs

Article No. 721044

DICTUM Long Knife Jig SM-100

DICTUM Long Knife Jig SM-100

For sharpening knife blades from 100 mm blade length. Wide clamping jaws allow the blade to be held securely, and an adjustable stop enables the cutting angle to be precisely set.
€27.90

incl. VAT plus shipping costs

Article No. 721045

DICTUM Scissors Jig SST-115

DICTUM Scissors Jig SST-115

For straight shear blades, hedge shears or plane blades. The jaws can be finely adjusted to the respective blade thickness. The separate guide plate can also be used as a grinding table. Total clamping length 115 mm, max. blade thickness...
€33.50

incl. VAT plus shipping costs

Article No. 721046

CBN Grinding Pin Ø 15 mm, B126

CBN Grinding Pin Ø 15 mm, B126

The cylindrical shape of this CBN grinding pin is ideal for grinding bore holes, radii and contours, and for resharpening carving and hook knives by hand with a flexible shaft or drill. CBN coating around the circumference and on the...
€12.90

incl. VAT plus shipping costs

Article No. 704942

Grinding Disc

Grinding Disc

For mounting on the right-hand shaft of the polishing motor. Velcro disc with mandrel. For machine shafts with diameter 10 mm.
€7.90

incl. VAT plus shipping costs

Article No. 728804

Clamping Flange, Pair, 10/40 mm

Clamping Flange, Pair, 10/40 mm

Inner diameter 10 mm, outer diameter 40 mm. 2 pieces.
€2.30

incl. VAT plus shipping costs

Article No. 729775

Clamping Flange, Pair, 10/55 mm

Clamping Flange, Pair, 10/55 mm

Solid steel, inner diameter 10 mm, outer diameter 55 mm. 2 pieces.
€6.90

incl. VAT plus shipping costs

Article No. 729454

Tool Rest for DICTUM Double-wheeled Grinder DS 150 S, Left

Werkzeugauflage für DICTUM Doppelschleifer DS 150 S

Fits Double-wheeled Grinder DS 150 S (No. 720795 ). Incl. mounting screws.
variants
€9.30

incl. VAT plus shipping costs

Article No. 830407

Tool Rest for DICTUM Low-speed Grinder DS 150 L, Left

Werkzeugauflage für DICTUM Langsamläufer DS 150 L

Suitable for Low-speed Grinder DS 150 L (No. 720782 ). Incl. mounting screws.
variants
€9.30

incl. VAT plus shipping costs

Article No. 830415

Protection Screen Right, Set

Sichtschutz, Set

Protective screen without magnifying glass. Incl. mounting screws. Fits Low-speed Grinder DS 150 L (No. 720782 ) and Double-wheeled grinder DS 150 S (No. 720795 ).
variants
€4.90

incl. VAT plus shipping costs

Article No. 830418

Base Plate for DICTUM Double-wheeled Grinder

Base Plate for DICTUM Double-wheeled Grinder

Matching base plate to connect the Wolverine sharpening system to the DICTUM Low-speed Grinder DS 150 L. The Oneway Wolverine sharpening system (No. 702170 ) was specially developed for sharpening woodturning tools. On double-wheeled...
€39.90

incl. VAT plus shipping costs

Article No. 731699

Hattori Angle Jig for Chisels and Plane Blades

Hattori Angle Jig for Chisels and Plane Blades

Gauge with 14 angles for checking tool cutting edges. The sizes of the angle notches are particularly suitable for chisels and plane blades. An engineer's corner at the base of each slot ensures full contact when checking a bevel and...
€28.90

incl. VAT plus shipping costs

Article No. 714676

DICTUM Polishing and Honing Paste

DICTUM Polishing and Honing Paste

Ideal for honing knife and tool blades. Effective and gentle removal of the burr in combination with e.g. leather honing wheels or strops. Cleans and polishes metal parts, gives a brilliant shine and protects surfaces from weathering....
€9.50

(Content: €118.75 / 1 kg)

incl. VAT plus shipping costs

Article No. 705055

DICTUM Plane Blade Jig SHV-77

DICTUM Plane Blade Jig SHV-77

This variable grinding jig for plane blades up to max. 77 mm width can be tilted +/- 5° by means of additional adjusting screws. This allows plane blades to be fixed and sharpened at precise angles. By turning back both adjusting screws,...
€39.90

incl. VAT plus shipping costs

Article No. 721051

Adaptor Flange with Precision Disc, Bore 12.7 mm, Spigot Length 24 mm

Adaptor Flange with Precision Disc, Bore 12.7 mm

The flange reduces the 32 mm standard bore of the grinding wheels to the 12.7 shaft diameter. It ensures an extremely smooth-running wheel in both axial and radial directions, and even better grinding results. Made in steel.
variants
€12.90

incl. VAT plus shipping costs

Article No. 820908

DICTUM Universal Jig 90° SU-77

DICTUM Universal Jig 90° SU-77

For straight cutting edges such as plane blades, chisels and paring chisels. A fence aligns the clamped blades at a 90° angle. Clamping width max. 77 mm. Suitable for sharpening machines with guide rod diameter 12 mm.
€24.30

incl. VAT plus shipping costs

Article No. 721037

DICTUM Sharpening Buddy

DICTUM Sharpening Buddy

Multifunctional jig for sharpening chisels and plane blades. Control device, bevel setter and setting gauge with fence (for setting the blade protrusion on sharpening jigs) combined in one gauge. The perfect companion for sharpening and...
€29.90

incl. VAT plus shipping costs

Article No. 714649

DICTUM Belt Grinding Device BS 50/55, fits Low-speed Grinder DS 150 L

DICTUM Belt Grinding Device BS 50/55, fits Low-speed Grinder...

With the Belt Grinding Device, the DICTUM Low-speed Grinder DS 150 L becomes even more versatile. By using abrasive belts of 50 mm or 55 mm width on the right side of the machine and the abrasive wheel on the left side, the low-speed...
€119.00

incl. VAT plus shipping costs

Article No. 711284

Tormek Converter OWC-1

Tormek Converter OWC-1

Attachment to adapt the Tormek bench grinder mounting kit BGM-100 (No. 705225 ) directly to a Wolverine V-arm. It allows to use any Tormek honing guide on double-wheeled grinders with the Wolverine system.
€16.10

incl. VAT plus shipping costs

Article No. 705353

Diamond Grinding Wheel Dresser

Diamond Grinding Wheel Dresser

This compact diamond grinding wheel dresser is used for trueing, cleaning and dressing silicon carbide and aluminium oxide grinding wheels of double-wheeled grinders. You simply place the tool on the tool rest and press it against the...
€18.30

incl. VAT plus shipping costs

Article No. 705259

DICTUM Superflange with Precision Disc, Bore 15 mm

DICTUM Superflange with Precision Disc

The flange allows to adjust the 32 mm standard bore of the CBN grinding wheels to the shaft diameter of the different sharpening machines. Made of aluminium.
variants
€14.90

incl. VAT plus shipping costs

Article No. 704848