Accessories and clamping devices

1 of 3
HNT Gordon Multi-function Vice

HNT Gordon Multi-function Vice

Conceived, designed and manufactured by Terry Gordon in Australia, the innovative and unique design of this multi-function vice is based on the exceptional ability of swivelling any object into the correct working position for safe...
€1,998.00

incl. VAT plus shipping costs

Article No. 715705

€142.00

incl. VAT plus shipping costs

Article No. 715706

HNT Gordon Front Vice

HNT Gordon Front Vice

Conceived, designed and manufactured by Terry Gordon in Australia, the innovative design of this front vice is based on the elegant and simple principle that two well-fitting concentric cylinders cannot tilt. Since the jaw surface...
€639.00

incl. VAT plus shipping costs

Article No. 715614

HNT Gordon Tail Vice, 100 mm

HNT Gordon Tail Vice

The tail vice can be fully integrated into the workbench. Only the knurled knob protrudes from the side and the removable brass bench dog can be inserted into a slot from above. This unobtrusive design allows each piece of wood to be...
variants
€298.00

incl. VAT plus shipping costs

Article No. 715612

York »Quick« Front Vice Guide, Spindle Length 300 mm, HVQ515

York »Quick« Front Vice Guide

The Quick front vice guide allows the front vice to be opened or closed quickly without tedious operation of the lathe spindle. The included quick-release mechanism works reliably and without an additional operating mechanism. Closing is...
variants
€114.60

incl. VAT plus shipping costs

Article No. 716279

DICTUM Stainless Steel Bench Dog with Workpiece Protection, Pair, Flat

DICTUM Stainless Steel Bench Dog with Workpiece Protection, Pair

Diameter 19.9 mm for exact fit in 20 mm holes, e.g. in the DICTUM Multifunction Table or the Festool MFT. The support ring Ø 25 mm offers stability and a good stop surface. In addition, O-rings made of abrasion-free silicone can be...
variants
€15.90

incl. VAT plus shipping costs

Article No. 729542

DICTUM Star Knob Screw with Pressure Plate, M8 x 10

DICTUM Star Knob Screw with Pressure Plate, M8

Thanks to the solid pressure plate made of stainless steel and with a diameter of 40 mm, auxiliary devices can be fixed safely and quickly in a hole grid of a workbench or multifunction table. The easy-to-use star knob screw facilitates...
variants
€11.50

incl. VAT plus shipping costs

Article No. 727891

DICTUM Aluminum Front Bench Dogs, Ø 25 mm, 1 pair

DICTUM Aluminum Front Bench Dogs, Ø 25 mm, 1 pair

With dog holes drilled in the front of the bench apron and these specifically developed front bench dogs it is possible to use the rear vice for clamping workpieces in front of the bench top. Can also be used as a support bolt for long...
€47.70

incl. VAT plus shipping costs

Article No. 705833

DICTUM Aluminum Bench Dogs, Ø 25 mm, 1 pair

DICTUM Aluminum Bench Dogs, Ø 25 mm, 1 pair

Round, rotatable bench dogs with a dual ball detent system. The bench dogs' planar clamping surface can be turned around and adjusted to the individual form of the workpiece, thus ensuring a perfect hold. Fits DICTUM workbench »Deluxe...
€49.00

incl. VAT plus shipping costs

Article No. 705832

DICTUM Wooden Square Bench Dogs, 1 pair

DICTUM Wooden Square Bench Dogs, 1 pair

Beechwood bench dogs with steel pressure spring for fixing workpieces at the required height. These bench dogs are gentle on your tools, making them particularly well suited for planing or for clamping delicate workpieces. Fits DICTUM...
€27.90

incl. VAT plus shipping costs

Article No. 705834

DICTUM Bench Dog Ø 19 mm, 1 Pair

DICTUM Bench Dog Ø 19 mm, 1 Pair

Galvanised steel dogs with square head and round shaft. This allows the serrated pressure surface to be turned in any direction. Thanks to the 40 mm long tenon, these dogs are particularly recommended for workbenches with thinner...
variants
€33.70

incl. VAT plus shipping costs

Article No. 716285

DICTUM Carving Support

DICTUM Carving Support

Rugged high-quality carving support made of steamed beech. The support is clamped into your workbench vice, thus provides safe and ergonomic working conditions for all kinds of sculpting projects. The working position can be set flexibly...
€99.00

incl. VAT plus shipping costs

Article No. 701047

Adapter Bolt for DICTUM Mounting Post SSP

Adapter Bolt for DICTUM Mounting Post SSP

The adapter is fixed to the multi-hole plate instead of the threaded column. This allows toggle lever clamps, push rod clamping devices and other quick-action clamps to be positioned on perforated plates with 20 mm holes. The adapter has...
€5.90

incl. VAT plus shipping costs

Article No. 728992

Klemmsia Hold-down Clamp Adapter, Basic, Shaft 19 mm, Clamping Height 150 mm

Klemmsia Hold-down Clamp Adapter, Basic, Shaft 19 mm

The body of the hold-down clamp is the same as that of the Klemmsia clamps. It can be used for clamping down workpieces or converted into a standard clamp by means of the attached screw mechanism in the perforated stud system. It can...
variants
€41.90

incl. VAT plus shipping costs

Article No. 708125

Klemmsia Clamping Arm, Standard, Jaw Depth 110 mm

Klemmsia Clamping Arm, Standard

Fits No. 708125 , 708126 , 708127 , 708128 , 708133 .
variants
€7.80

incl. VAT plus shipping costs

Article No. 708129

Klemmsia Clamping Arm 90°, Throat Depth 110 mm

Klemmsia Clamping Arm 90°, Throat Depth 110 mm

Maximum clamping force at 90° position of the eccentric lever. Fits No. 708125 , 708126 , 708127 , 708128 , 708133 .
€9.90

incl. VAT plus shipping costs

Article No. 708159

Extension for Klemmsia Hold-down Clamp

Extension for Klemmsia Hold-down Clamp

Fits No. 708125 , 708126 , 708127 , 708128 .
€5.50

incl. VAT plus shipping costs

Article No. 708132

Standard Bench Vice

Standard Bench Vice

Metal vice with double guide tracks, trapezoidal thread and extendable bench dog. Screwed to the bottom of the bench plate (installation height 60 mm), jaw drill holes for fastening wooden blocks.
€64.90

incl. VAT plus shipping costs

Article No. 705768

Veritas Twin-Screw Vice

Veritas Twin-Screw Vice

This vice allows you to clamp workpieces anywhere in the vice while the jaws stay parallel. The chain drive ensures parallelism and virtually eliminates the racking common in other vices. The vice can be operated using either handle. A...
€272.00

incl. VAT plus shipping costs

Article No. 705816

Installation Kit for Lie-Nielsen Tail Vice

Installation Kit for Lie-Nielsen Tail Vice

For mounting the Lie-Nielsen tail vice No. 705733 .Kit includes: 2 drills (1/4" und 5/16"), 2 taps (5/16-18 and 3/8-16), 2 transfer punches (Ø 3/8" and 5/16"), 4 hex keys (1/8", 3/16", 7/32" and 1/4"), 3 hex drivers (3/16", 7/32" and...
€30.90

Article No. 705734

End Support for Front Vice Guide Rods

End Support for Front Vice Guide Rods

With an end support that connects the two guide rods of the front vice mechanism, you can precisely adjust the parallel position of the jaw to the bench apron. If the font vice warps, you can restore parallelism with the end support. You...
€39.70

incl. VAT plus shipping costs

Article No. 740223

Setscrew for Vice Jaw

Setscrew for Vice Jaw

A setscrew inside the vice allows counterpressure when clamping one side only and prevents the jaw from tilting.
€23.90

incl. VAT plus shipping costs

Article No. 740222

Front Vice Guide

Front Vice Guide

Solid and robust front vice mechanism for installing in self-made workbenches. Also suitable for modifying or retrofitting existing benches. To ensure parallelism, we recommend installing an end support No. 740223 . Screw length 410 mm,...
€120.40

incl. VAT plus shipping costs

Article No. 740221

Front Vice Guide, Heavy Cast Version

Front Vice Guide, Heavy Cast Version

The extremely robust and torsion-resistant vice mechanism is designed in such a way that even pressure is exerted over the entire width of the vice, even when you clamp workpieces in one jaw end only and with maximum pressure. This...
€198.00

incl. VAT plus shipping costs

Article No. 740224

Tail Vice Guide

Tail Vice Guide

Robust and wear-resistant tail vice used by most renowned workbench manufacturers. The backlash-free and preset all-steel guide is easy to install. Max. opening 210 mm, extra-strong 28 mm spindle Ø, opening for vice handles 27 mm....
€153.00

incl. VAT plus shipping costs

Article No. 740225

Extended Cover for Veritas Twin-Screw Vice

Extended Cover for Veritas Twin-Screw Vice

Expands the maximum spacing of your Veritas Twin-Screw Vice (No. 705816 ) to 610 mm. Comes with a longer chain (1350 mm). Without front and rear cover endpieces.
€44.00

incl. VAT plus shipping costs

Article No. 705851

Heavy Bench Vice, 210 mm

Heavy Bench Vices

Solid metal vice enables exact and strong clamping on the workbench. The grey cast iron jaws run on two 25 mm strong steel guide rods virtually free of play. The 24 mm strong, precisely milled spindle has asymmetrically shaped threads to...
variants
€99.00

incl. VAT plus shipping costs

Article No. 705806

Lake Erie Toolworks Wagon Vice, Premium

Lake Erie Toolworks Wagon Vice, Premium

The wagon vice is a rear vice in which the runner is guided in a groove. Using the runner, the workpiece is either clamped directly or using a bench hook. The handle provided has a screw thread on both sides to allow it to be dismantled...
€329.00

incl. VAT plus shipping costs

Article No. 706174

Lake Erie Toolworks Wood Shoulder Vice, Standard

Lake Erie Toolworks Wood Shoulder Vice, Standard

The principle of the shoulder vice is basically that of a rear vice, but which clamps vertically to the longitudinal edge of the workbench. The clamping runner does not travel to the side as is common in rear vices, but instead towards...
€276.00

incl. VAT plus shipping costs

Article No. 706176

Compact Double-Spindle Front Vice, Heavy Cast Version

Compact Double-Spindle Front Vice, Heavy Cast Version

The compact design enables quick and easy assembly. The robust mounting plate guarantees a warp-resistant vice mechanism for parallel clamping and even pressure across the entire vice surface. The spindle gap of 210 mm also allows for...
€262.00

incl. VAT plus shipping costs

Article No. 740227

Moxon Vice Spindle Set

Moxon Vice Spindle Set

Spindle set for a mobile collet chuck. Joseph Moxon first described and demonstrated this type of vice in his book »Mechanick Exercises« in 1703. These very simple yet enormously useful double-spindle clamps provide the following...
€129.90

incl. VAT plus shipping costs

Article No. 716278

Lake Erie Toolworks, Moxon Vice

Lake Erie Toolworks, Moxon Vice

The Moxon Vice is a fitted front vice. It can be clamped to any workbench. It has also a very flexible working height and can be individually adjusted for an ergonomic posture. Maximum possible clamping width 105 mm. Clearance between...
€193.00

incl. VAT plus shipping costs

Article No. 706175

Lake Erie Toolworks Wood Vice Screw, Basic

Lake Erie Toolworks Wood Vice Screw, Basic

This basic set contains the key components for all popular front vice types (leg vice, twin vice, face vice). However, it is also suitable for developing a wide range of custom wooden screw thread designs.
variants
€180.00

incl. VAT plus shipping costs

Article No. 706177

Lake Erie Toolworks Wood Vice Screw, Premium

Lake Erie Toolworks Wood Vice Screw Premium

This premium set contains the main components for all popular front vice types (leg vice, twin vice, face vice). The handle provided has a screw thread on both sides to allow it to be dismantled again later on. The ends of the handle are...
variants
€252.00

incl. VAT plus shipping costs

Article No. 706173

Hold-down Clamp, Jaw Depth 100 mm, Ø 19-22 mm

Hold-down Clamp

Quickly fastens all types of workpieces to the joiner’s bench top. The rod of the cast ductile iron clamp is slipped into a drill hole, self-locking mechanism.
variants
€12.20

incl. VAT plus shipping costs

Article No. 705756

Sjöbergs Insertion Clamp

Sjöbergs Insertion Clamp

Solid clamp for clamping workpieces to the bench top and the front of the bench apron. Also suitable for clamping on the bench support in the base leg of the DICTUM Workbench »Deluxe 2000«. Large diameter 58 mm plastic pad prevents...
€49.80

incl. VAT plus shipping costs

Article No. 706328

Veritas Bench Clamp, Ø 19 mm, Length 65 mm

Veritas Bench Clamps

This clamping tool will make your workbench even more versatile. The shaft can be inserted into a 19 mm drill hole anywhere on the bench’s top, front or frame. Irregularly shaped workpieces are no match for this clamping system with its...
variants
€36.20

incl. VAT plus shipping costs

Article No. 705926

Square Bench Dogs, 1 pair

Square Bench Dogs, 1 pair

Aluminium bench dogs with steel pressure spring for fixing at the required height. Fits DICTUM workbenches »Allround 1700« und »Deluxe 2000«.
€73.40

incl. VAT plus shipping costs

Article No. 706321

Ulmia Aluminium Bench Dogs, Ø 30 mm, 1 Pair

Ulmia Aluminium Bench Dogs, Ø 30 mm, 1 Pair

Round, rotatable bench dogs with a dual ball detent system. The bench dogs’ planar clamping surface can be turned around and adjusted to the individual form of the workpiece, thus ensuring a perfect hold. Fits DICTUM Workbench »Allround...
€63.40

incl. VAT plus shipping costs

Article No. 706086

Veritas Brass Bench Dogs, 1 Pair, Ø 19 mm, Länge 60 mm

Veritas Brass Bench Dogs, 1 Pair

Cylindrical brass posts (Ø 19 mm) with side springs. The textured jaws have an inward cant (2°) to prevent the workpiece from slipping upwards. Two pieces each. Fits DICTUM workbench »Junior« (No. 706300 , 706077 and 706302 ) and DICTUM...
variants
€23.70

incl. VAT plus shipping costs

Article No. 705924

Brass Bench Dogs, 1 Pair, Ø 19 mm, Length 60 mm

Brass Bench Dogs, 1 Pair, Ø 19 mm

Cylindrical brass bolts (Ø 19 mm) with retaining springs. Knurled jaws with 2° inclination to prevent the workpiece from coming off. Two pieces each. Fits DICTUM Workbench »Junior« (No. 706300 , 706077 and 706302 ), Add-On Vice with...
variants
€17.90

incl. VAT plus shipping costs

Article No. 707868

Veritas Hold Down Clamp, Ø 19 mm

Veritas Hold Down Clamp, Ø 19 mm

Workpieces in all forms and shapes, which are hard to clamp down, can now be held in place easily and securely. The toothed rod is inserted into a horizontal or vertical 19 mm hole on the workbench plate. Tightening the nut activates the...
€99.90

incl. VAT plus shipping costs

Article No. 705760

Bench Wrench

Bench Wrench

Fits DICTUM workbenches and Lie-Nielsen vice mechanisms. Maple handle rod, red beech knobs.
€6.90

incl. VAT plus shipping costs

Article No. 706340

Lie-Nielsen Bench Vice Handle, Low Profile Maple Knobs

Lie-Nielsen Bench Vice Handle

High-quality maple vice handle. The end caps are set off with brass bolsters and screwed into the handle rod with brass screws. The brass bolsters are cushioned with rubber O-rings.
€39.90

Article No. 705727

Universal Multi-purpose Grease, 50 g

Universal Multi-purpose Grease, 50 g

Ultra-smooth, universal lithium grease. For spindles, bearings, sliding surfaces, and components that need to be protected and remain movable. Grease pad suitable for filling grease guns. Burning point > 200 °C, dripping point > 190 °C.
€3.80

(Content: €76.00 / 1 kg)

incl. VAT plus shipping costs

Article No. 810090

Lie-Nielsen Holdfast, Ø 19 - 30 mm

Lie-Nielsen Holdfast

High-quality holdfast of cast ductile iron for clamping workpieces on the workbench. The slight curve of the head provides space to work. The forged shaft is flexible enough to grip the workpiece firmly, but can easily be loosened by...
€65.90

Article No. 705761

Insertion Clamp, Ø 30 mm

Insertion Clamp, Ø 30 mm

This clamp allows workpieces to be fastened in the centre of the worktop or at the front of the workbench. Made in cooperation with a German clamp manufacturer. Fits Ulmia workbenches and DICTUM Workbench »Allround 1700«.
€101.60

incl. VAT plus shipping costs

Article No. 706320

1 of 3