Accessories and clamping devices

1 of 11
HNT Gordon Multi-function Vice

HNT Gordon Multi-function Vice

Conceived, designed and manufactured by Terry Gordon in Australia, the innovative and unique design of this multi-function vice is based on the exceptional ability of swivelling any object into the correct working position for safe...
€1,998.00

incl. VAT plus shipping costs

Article No. 715705

€142.00

incl. VAT plus shipping costs

Article No. 715706

HNT Gordon Front Vice

HNT Gordon Front Vice

Conceived, designed and manufactured by Terry Gordon in Australia, the innovative design of this front vice is based on the elegant and simple principle that two well-fitting concentric cylinders cannot tilt. Since the jaw surface...
€639.00

incl. VAT plus shipping costs

Article No. 715614

HNT Gordon Tail Vice, 100 mm

HNT Gordon Tail Vice

The tail vice can be fully integrated into the workbench. Only the knurled knob protrudes from the side and the removable brass bench dog can be inserted into a slot from above. This unobtrusive design allows each piece of wood to be...
variants
€298.00

incl. VAT plus shipping costs

Article No. 715612

York »Quick« Front Vice Guide, Spindle Length 300 mm, HVQ515

York »Quick« Front Vice Guide

The Quick front vice guide allows the front vice to be opened or closed quickly without tedious operation of the lathe spindle. The included quick-release mechanism works reliably and without an additional operating mechanism. Closing is...
variants
€114.60

incl. VAT plus shipping costs

Article No. 716279

DICTUM Stainless Steel Bench Dog with Workpiece Protection, Pair, Flat

DICTUM Stainless Steel Bench Dog with Workpiece Protection, Pair

Diameter 19.9 mm for exact fit in 20 mm holes, e.g. in the DICTUM Multifunction Table or the Festool MFT. The support ring Ø 25 mm offers stability and a good stop surface. In addition, O-rings made of abrasion-free silicone can be...
variants
€15.90

incl. VAT plus shipping costs

Article No. 729542

DICTUM Star Knob Screw with Pressure Plate, M8 x 10

DICTUM Star Knob Screw with Pressure Plate, M8

Thanks to the solid pressure plate made of stainless steel and with a diameter of 40 mm, auxiliary devices can be fixed safely and quickly in a hole grid of a workbench or multifunction table. The easy-to-use star knob screw facilitates...
variants
€11.50

incl. VAT plus shipping costs

Article No. 727891

DICTUM Aluminum Front Bench Dogs, Ø 25 mm, 1 pair

DICTUM Aluminum Front Bench Dogs, Ø 25 mm, 1 pair

With dog holes drilled in the front of the bench apron and these specifically developed front bench dogs it is possible to use the rear vice for clamping workpieces in front of the bench top. Can also be used as a support bolt for long...
€47.70

incl. VAT plus shipping costs

Article No. 705833

DICTUM Aluminum Bench Dogs, Ø 25 mm, 1 pair

DICTUM Aluminum Bench Dogs, Ø 25 mm, 1 pair

Round, rotatable bench dogs with a dual ball detent system. The bench dogs' planar clamping surface can be turned around and adjusted to the individual form of the workpiece, thus ensuring a perfect hold. Fits DICTUM workbench »Deluxe...
€49.00

incl. VAT plus shipping costs

Article No. 705832

DICTUM Wooden Square Bench Dogs, 1 pair

DICTUM Wooden Square Bench Dogs, 1 pair

Beechwood bench dogs with steel pressure spring for fixing workpieces at the required height. These bench dogs are gentle on your tools, making them particularly well suited for planing or for clamping delicate workpieces. Fits DICTUM...
€27.90

incl. VAT plus shipping costs

Article No. 705834

DICTUM Bench Dog Ø 19 mm, 1 Pair

DICTUM Bench Dog Ø 19 mm, 1 Pair

Galvanised steel dogs with square head and round shaft. This allows the serrated pressure surface to be turned in any direction. Thanks to the 40 mm long tenon, these dogs are particularly recommended for workbenches with thinner...
variants
€33.70

incl. VAT plus shipping costs

Article No. 716285

1 of 11