Pfeil

产品来自 Pfeil

Pfeil

The production of Pfeil® knives is based on an old artisan tradition. The company was founded in 1902 in Langenthal as a knife smithy. Production of the first carving tools was started in around 1942. The high quality of the tools soon led to great popularity with professional carvers, but also with hobby carvers and schools both at home and abroad.

With over 700 forms and sweeps, Pfeil offers the largest and most variable product range. The products of the worlds leading manufacture of fine carving tools are made from specially alloyed, hard tool steel, forged and ground on precision machines, heat-treated in an electric furnace and sharpened by hand ready-for-use. The blades are uniformly hardened to 59-61 HRC along their entire length, the break-proof oiled ash handles are mounted with inner ferrules. Only indigenous woods and solvent-free oils are used.
Your advantage:

  • Quick delivery straight from stock
  • Lifetime warranty on material and workmanship! (Damage caused by improper use is not covered by this warranty)
1 30
Pfeil Sculpture iron, 刮刀/山羊脚,短曲柄形式,针迹11A / 2 mm。

Pfeil Carving Tools, Gouges/V-Parting Tools, Short Bent

与长曲柄版本类似,这些铁杆也用于处理深邃、弯曲的形状。铸铁的曲率更大,可以在更大的深度上创造过渡,并加工小半径和弧度。
 
€ 24.90

计算在内增值税 含运费

商品编号 700705

Pfeil 双手空心换针,针法7。

Pfeil 双手空心换针,针法7。

摔锻坚固的德克塞尔。手柄由天然白蜡木制成。内磨用于精确地应用切割的直接触面。
 
€ 94.40

计算在内增值税 含运费

商品编号 700942

Pfeil Sculpture iron,刮刀/山羊脚,长曲柄形式,缝线12L/10mm。

Pfeil Carving Tools, Gouges/V-Parting Tools, Long Bent

长冠形用在弧形凹槽中,是为了在最低点后能再次穿出形体。因此,凹槽的边缘不会因曲柄形状而受损。
 
€ 31.50

计算在内增值税 含运费

商品编号 700721

Pfeil雕塑铁,花铁,薄型锻造,缝合3F/12mm。

Pfeil Carving Tool, Gouge, Fishtail, Thin Blades

花铁,由于其圆锥形的形状,可用于浮雕的底纹和一般的修饰。由于棱角突出,在狭窄的壁龛中很容易被引导,而且铁的角度仍然可以被修正。
 
€ 26.40

计算在内增值税 含运费

商品编号 700741

Pfeil Sculpture iron, 刮刀/山羊脚,短曲柄形式,针迹11A / 4 mm。

Pfeil Carving Tools, Gouges/V-Parting Tools, Short Bent

与长曲柄版本类似,这些铁杆也用于处理深邃、弯曲的形状。铸铁的曲率更大,可以在更大的深度上创造过渡,并加工小半径和弧度。
 
€ 24.90

计算在内增值税 含运费

商品编号 700706

Pfeil 雕刻机,刀片宽度为15毫米。

Pfeil Woodworking Knives

由瑞士合金钢制成。约59-60HRC,两边的地面。
 
€ 11.20

计算在内增值税 含运费

商品编号 700405

Pfeil Sculpture iron, gouge, straight, stitch 3 / 3 mm.

Pfeil Carving Tools, Gouges, Straight

从粗加工到成型和精加工,凿子是最通用的雕刻工具。如果需要在凸面上工作,每个熨斗还可以倒置引导。这11针,构成了从抠脚到羊脚的过渡,常用来制造形状过渡。
 
€ 20.90

计算在内增值税 含运费

商品编号 700821

Pfeil Sculpture iron, gouge, straight, stitch 3 / 5 mm.

Pfeil Carving Tools, Gouges, Straight

从粗加工到成型和精加工,凿子是最通用的雕刻工具。如果需要在凸面上工作,每个熨斗还可以倒置引导。这11针,构成了从抠脚到羊脚的过渡,常用来制造形状过渡。
 
€ 20.90

计算在内增值税 含运费

商品编号 700822

Pfeil 雕塑铁,平铁,两面研磨,缝合1/8毫米。

Pfeil Carving Tools, Chisels, Double Bevel

平铁最好用于刻字,也可用于雕刻,还可用于磨平图区的直面或微凸面。对角线地面的版本可以进行拉削,铁皮可以更好地引导到角落里。
 
€ 20.90

计算在内增值税 含运费

商品编号 700803

Pfeil缺口雕刻刀,形式7,刀刃宽度13毫米。

Pfeil Chip Carving Knives

现成的研磨和抛光的雕刻刀,手柄为樱桃木制成的细油手柄。形状和尺寸完全适合于小人物的自由雕刻、缺口雕刻和编织。
 
€ 10.60

计算在内增值税 含运费

商品编号 700926

1 30