Herdim System Smoothing Reamer with 1/4 Hexagonal Shaft
The cutting edges of the regular Herdim reamers are bevel ground to a sharp edge, resulting in an...
The cutting edges of the regular Herdim reamers are bevel ground to a sharp edge, resulting in an aggressive cutting action. This smoothing reamer however has cutting edges which are on one side slightly rounded, according to the radius of the reamer. This reduces the cutting performance but improves the surface quality and roundness of the hole. We recommend using this reamer as a finishing tool in addition to the regular reamers, for highest demands in the peg fitting process. The drills can also be driven with a cordless power drill. In this case the cutting action is especially smooth and effortless.Spiral cutting edges with TIN coating.
- 仪器 Violin Standard
- 啮合 spiral
- TIN 涂层 TIN
- 直径 - 最大 10 mm
- 直径 - 最小 5.5 mm
- 圆锥体 1/30
| 商品编号 | 730413 |
| 品牌 | Herdim |
附件
Herdim System Calibrated Stop Ring for Peg Reamers, Violin 4/4...
Using the calibrated stop rings on Herdim reamers enables you to trim the pegholes to a definite diameter matching precisely the final diameter of the Herdim standardized pegs. The same applies to the conical holes of endbuttons and...
Padouk Handle for Reamers with Hexagonal Shaft, Spindle Shape,...
The 1/4" magnetic handle holds the reamer safely when manually operated without power tool.