Herdim
产品来自 Herdim
在 DICTUM 在线购买 Herdim 的产品。
Herdim Peg Shaper and Reamer, 22-Piece Set
22-piece set of tools for fitting pegs of all sizes from 1/16 violin - 4/4 cello, as well as for making peghole bushings. Peg shapers (one of each) No. 730101 , -102, -201, -202, -203; 8 repl. blades No. 730100 , 6 replacement blades No....
Herdim System Peg Reamers with 1/4 Hexagonal Shaft
The Herdim peghole reamers for violin and cello pegs can be used with the beautiful wooden handles in spindle shape. The drills can also be driven with a cordless power drill. In this case the cutting action is especially smooth and...
Herdim System Smoothing Reamer with 1/4 Hexagonal Shaft
The cutting edges of the regular Herdim reamers are bevel ground to a sharp edge, resulting in an aggressive cutting action. This smoothing reamer however has cutting edges which are on one side slightly rounded, according to the radius...
Herdim System Calibrated Stop Rings for Peg Reamers
Using the calibrated stop rings on Herdim reamers enables you to trim the pegholes to a definite diameter matching precisely the final diameter of the Herdim standardized pegs. The same applies to the conical holes of endbuttons and...
Herdim Taper Pins
For setting ring-shaped peghole bushings and for smoothing the sur-faces of the holes. Made of tool steel, precision-ground conical pin, without cutting edges.
Herdim Multi Peg Shapers
The most versatile peg shaper available for professional restoration work. The Herdim Multi is variable in diameter and taper, allowing pegs to be shaped to the exact dimensions of the existing pegholes. This saves time and preserves the...
Herdim Violin, Viola Assembly Clamps, 32-Piece Set
Polyurethane clamping pads with brass-reinforced bushings. Gunmetal-finished spindles with quick-acting brass thumbscrews for easy adjustment.
Herdim Violin, Viola Assembly Clamps
Polyurethane clamping pads with brass-reinforced bushings. Gunmetal-finished spindles with quick-acting brass thumbscrews for easy adjustment.
Herdim Lateral Clamp Spindle
The ideal device for applying lateral pressure to the rib area, e.g. for leveling and properly aligning cracked ribs. Designed to be used in conjunction with Herdim violin or cello assembly clamps. Spindle with adjustable clamping pad...
Herdim Rib Corner Clamps
For regluing rib corners. After attaching the clamp to the rib corner area, pressure can be applied directly to both sides of the rib corner using the small perpendicular spindles.
Herdim Cello Assembly Clamps, 42-Piece Set
The fiber-reinforced plastic clamping pads yield a lightweight yet nevertheless very sturdy clamp. The pads feature additional flexible polyurethane inserts to prevent marking of the wood surface and varnish coat. The spindle is...
Herdim Cello Assembly Clamps
The fiber-reinforced plastic clamping pads yield a low weight yet nevertheless very sturdy clamp. The pads feature additional flexible polyurethane inserts to prevent marking of the wood surface and varnish coat. The spindle is partially...
Herdim Hand-Forged Repair Clamps
These traditional clamps, designed for the repair of musical instruments, are excellently suited to the construction of models thanks to their compact size. The two larger versions have a wide grip, and are therefore also used by...
Herdim Lower Block Clamps
For gluing the ribs to the lower block without disassembling the instrument. Once inserted into the instrument, the steel pivot automatically flips into the cross position as the screw is turned. Hardwood body lined with cork.
Herdim Aluminium Crack Clamps
The Herdim aluminium crack clamps are not only extremely low weight, they also show twisting clamping jaws which are flexible and perfectly accommodate to the contours of the instrument. The risk of chipping the edges when repairing a...
Herdim Aluminium Crack Clamps
The Herdim aluminium crack clamps are not only extremely low weight, they also show twisting clamping jaws which are flexible and perfectly accommodate to the contours of the instrument. So the risk of chipping the edges when repairing a...
Herdim U-Shaped Crack Clamps
The 4-screw system can be adjusted to any geometry of any crack. Even cracks which are significantly deformed can be brought back together by this versatile tool. Rubber padded plates and silicone pads (No. 820068 not included) enable...
Herdim Classic Soundpost Setter, Violin
Hand-forged, patterned after an old English design. Rounded edges, finest workmanship, superb balance, gunmetal finish.
Herdim Profile Patterns, 6-Piece Set
Precision patterns for shaping bridges and fingerboards. The tapered spurs at the base of the bridge patterns are for gauging the string height. 6-piece set for violin, viola and cello made of stainless steel. Sizes according to Hans...
Herdim String Lifter
Practical tools for exchanging, adjusting and fitting bridges. Designed to lift the tensioned strings of the existing bridge, allowing work to be done without risk of dropping the soundpost. The string lifter simultaneously marks the...
Herdim Tone Hole Reamers, spiral toothed
Cleanly cut tone holes improve both the tonal clarity and appearance of flutes, clarinets and oboes. The spiral cutting edges of the Herdim drills allow perfectly round holes with finely finished surfaces to be cut, even in wood with...
Herdim Upper Nut Spacing Templates
Proper spacing of strings on the upper nut of the violin is a must, both from functional and esthetic point of view. Proper spacing involves correct and even outside gap from the fingerboard on both sides (G and E string) and even...
Herdim Repair Clamps, 7-Piece Set
The set contains one each of No. 735720 , 735721 , 735722 , 735723 , 735724 , 735725 und 735726 . These clamps feature all requirements for repair clamps used on fine and fragile structures: High stiffness versus low weight - especially...
Herdim F-Hole Clamp, Jaw Opening 100 mm
The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
Herdim Crack Clamps
The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
Herdim F-Hole Clamps
The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
Herdim Double-Sided Crack Clamps
The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
Herdim Outline Templates, 5-Piece Set
The set contains all necessary templates for plate outline, rib-form outline, neck (scroll) template, f-hole template including the f-hole position and an outer corner form for detailed control on corner details.
Herdim Arching Templates, 4-Piece Sets
Set of three transversal arching and one longitudinal enable to replicate precisely the top or back arching of these instrument patterns. The templates replicate the positive part of the arching, leaving the edgework around the outline...
Herdim Outline Templates, 2-Piece Set, Cello
The set contains all necessary templates for plate outline combined with ribs, scroll and f-hole.
Herdim Radius Gauges, Notched, Guitar, 4-Piece Set
The gauge tailored for quick and accurate measurement of the fretboard base radius, without necessary removal of the strings. Laser cut from 1 mm stainless steel, the set of 4 gauges can measure radii 7.25", 9.5", 10", 12", 14", 15", 16"...
Herdim Radius Gauges, Guitar, 2-Piece Set
Traditional templates for measuring of the curvature of the fretboard. Set of two covers radii 7.25", 9.5", 10", 12", 14", 15", 16" and 20". Laser cut from 1 mm stainless steel.
Herdim Understring Radius Gauges, Guitar, 8-Piece Set
Indispensable when setting and adjusting the magnets of the pickups. The gauge, only 3 mm high at the measuring base, can be slipped under the strings without their removal. The spokes have identical radius on the top and bottom, so the...
Herdim Fretboard Guards, Guitar, 3-Piece Set
Supposed to be placed over fret which is being shaped, to work without worry of fretboard damage. The rubber band holds the guard in position, the rubber band being placed in the way, it does not interfere with the tools in use. Set of 3...