Herdim Crack Clamps
The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
Herdim Lower Block Clamps
For gluing the ribs to the lower block without disassembling the instrument. Once inserted into the instrument, the steel pivot automatically flips into the cross position as the screw is turned. Hardwood body lined with cork.
Herdim Crack-Gluing Clamp
Small specialty tool for gluing cracks. Galvanized steel. (Can be tightened with a M2 hex wrench, not included). The blocks lining the crack are cut off after gluing. Opening 12 mm, Depth 5 mm.
Herdim F-Hole Clamp, Jaw Opening 100 mm
The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
Herdim Edge Clamp
For repairing cracks close to the edges. Exceptionally strong titanium coloured aluminum alloy body. Precision double guide rods, adjustable base height, direct pressure application upon closure.
Herdim Rib Corner Clamps
For regluing rib corners. After attaching the clamp to the rib corner area, pressure can be applied directly to both sides of the rib corner using the small perpendicular spindles.
Herdim U-Shaped Crack Clamps
The 4-screw system can be adjusted to any geometry of any crack. Even cracks which are significantly deformed can be brought back together by this versatile tool. Rubber padded plates and silicone pads (No. 820068 not included) enable...
Herdim Aluminium Crack Clamps
The Herdim aluminium crack clamps are not only extremely low weight, they also show twisting clamping jaws which are flexible and perfectly accommodate to the contours of the instrument. The risk of chipping the edges when repairing a...
Herdim Aluminium Crack Clamps
The Herdim aluminium crack clamps are not only extremely low weight, they also show twisting clamping jaws which are flexible and perfectly accommodate to the contours of the instrument. So the risk of chipping the edges when repairing a...
Herdim 3-Arm Crack Clamps
The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
Herdim Double-Sided Crack Clamps
The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
Herdim F-Hole Clamps
The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
Herdim Repair Clamps, 7-Piece Set
The set contains one each of No. 735720 , 735721 , 735722 , 735723 , 735724 , 735725 und 735726 . These clamps feature all requirements for repair clamps used on fine and fragile structures: High stiffness versus low weight - especially...
Herdim Neck Drilling Jig
A peghole bore either in a new violin or in one after bushing must be perfectly perpendicular to the longitudinal axis of the instrument. The drilling jig adopts both an instrument or single neck and ensures a perfect perpendicular...
Herdim Over the Rib Repair Clamps
Some repairs as soundpost patch, opened seam and crack repair must be done on the back plate over the ribs. Clamping the cleats and patches is then, due to the rib height quite a tricky task. Using these over the rib steel clamps is an...
Herdim Holders for Peg Drilling
The unique template will guide drilling of the hole perfectly perpendicular and centered on the shaft of any peg.
Herdim Hand-Forged Repair Clamps
These traditional clamps, designed for the repair of musical instruments, are excellently suited to the construction of models thanks to their compact size. The two larger versions have a wide grip, and are therefore also used by...
Aluminium Repair Clamps
Low weight, torsion-resistant clamps made of hammer-finished, cast aluminium. Offset base, steel screw and ball-jointed swivel pad.
Aluminium Repair Clamps, 5-Piece Set
Low weight, torsion-resistant clamps made of hammer-finished, cast aluminium. Offset base, steel screw and ball-jointed swivel pad.
Silicone Protective Pads for Herdim Repair Clamps
High-quality soft silicone pads that are pulled over the movable pressure plate of repair clamps to optimally protect even the most sensitive varnished surfaces from marring. Fits Herdim Repair Clamps and Herdim Hand-Forged Repair Clamps.
Fingerboard Pads
For an even distribution of clamping pressure when gluing fingerboards in place. Pads with cork lining to prevent risk of surface damage of the neck. The radiuses of both pads perfectly adjusted to the true radiuses of a violin neck and...
Rubber Cork Pads
Delicate surfaces of fine musical instruments require cushioned clamping. Different sizes of these self adhesive 1 mm thick cork cushions offer versatility to cushion any conceiveable tool and clamp. Simple removing makes possible to...
Repair Holder, Violin, Viola
Aluminium framework mounted on an acrylic glass base, 28 x 35 cm. Lower bout clamp. Max. opening of body clamp 250 mm.
Shaping Moulds for Tops and Backs
Traditional tool for simplify the work on the top and back. Heavy plywood base, 5 adjustable screws to hold the plate.
Bow Rehairing Device
Traditional device for safe holding the bow during rehairing process. In length-adjustable tip holder, all holding devices cork padded for secure operation.