€ 117.80
商品编号 703814
Philip Marcou 的 "Afzelia "迷你切片机
微型刨床配有耐磨黄铜底板，是精确加工边缘和磨平凸形部件的完美选择。刨体由坚固的南非阿菲泽利亚木制成，其高质量的做工和独特的设计令人印象深刻。实心黄铜挡板还可用作断屑器和铁紧固件。黄铜滚花螺钉可快速、轻松地调节熨斗。刨刀采用硬度为 59-60 HRC 的优质 O1 钢，具有极高的切削能力。
Herdim Block Plane No. 100
The Stanley company produced the No. 101 block plane between 1877 and 1962. The tool enjoyed great popularity among musical instrument and fine furniture makers due to its small size and excellent function. The Herdim No. 101...
Herdim Block Plane No. 101
The Stanley company produced the No. 101 block plane between 1877 and 1962. The tool enjoyed great popularity among musical instrument and fine furniture makers due to its small size and excellent function. The Herdim No. 101...
Herdim Micro Plane, with Case
At a mere 12 mm long and 4 mm blade width, this is the smallest functional plane ever to be manufactured in series. Used by violin makers for hollowing surfaces. Brass body with arched sole, ebony wedge. Ebony case. Blade thickness 0.9 mm
Herdim Fingerboard Plane, Concave Arched Sole, Blade Width 18 mm
Concave arched sole with a precise radius R45 for violin and viola enable to shape and chamfer the fingerboard effectively and precisely. HSS blades with outstanding durability on ebony. The plane has an adjustment for a ball handle No....
Herdim Fingerboard Plane with Handle, Concave Arched Sole,...
Concave arched sole with a precise radius R50 for cello and bass enable to shape and chamfer the fingerboard effectively and precisely. HSS blades with outstanding durability on ebony. Body 84 x 32 mm For Cello, Bass
Ibex Finger Plane, Flat Sole
Polished bronze castings with precisely machined beds and screw caps. Rounded bodies with forwardly positioned blades for close work. Blade hardness approx. 60 HRC.
Ibex Finger Planes, Arched Sole
Polished bronze castings with precisely machined beds and screw caps. Rounded bodies with forwardly positioned blades for close work. Blade hardness approx. 60 HRC.
Ball Handle for Fingerplanes
The end with M5 thread fits into adjusted holes in Herdim planes with screw caps and wooden wedges (32, 40 and 50 mm overall length) and Herdim fingerboard plane. The ball end enables effortless, precise and easy driving of the plane...
Bow Maker‘s Plane, Blade Width 30 mm
An upright 90° positioned blade setup of a wooden plane for uneven hardwoods (pernambuco, ebony). Brass sole, HSS blade for cutting-edge durability.
Fingerboard Block Plane, Blade Width 30 mm
Block plane with a very low blade angle and precisely machined narrow mouth opening. It allows extra-thin material removal, that is necessary for a perfect shaping of the cello and bass fingerboard. Brass body, ergonomically shaped brass...
Herdim Scraper Blades
Very even metal structure for a fine burr that is achieved by a special hot rolling process with simultaneous hardening treatment. Hot-rolled - the entire material is elastic and has an even structure Made of spring steel with a small...
Herdim Scraper Blades, Stainless Steel
Thanks to the use of stainless steel, this scraper blade is permanently protected against patches of rust caused by hand perspiration. It is also three times more durable than spring steel scrapers. Hot-rolled - the entire material is...
Herdim Opening Chisel
Using this tool makes opening of the instrument an easy task. Tapered blade can be easily bounced with hammer on the thicker (2 mm) end, very thin blade 0.4 mm easily opens the plate-rib joint. The corner and endblocks can be gently...
Herdim Scroll Gouges
This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
Herdim Scroll Gouges
This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
Herdim Scroll Gouges
This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
Herdim Scroll Gouges
This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
Herdim Cornerblock Gouges
Cornerblock gouges for carving of the corner blocks in the ribs. Tapered octagonal beech handles. Sharpened to ready-to-use.
Herdim Scroll Gouges, 12-Piece Set
This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
Pfeil Flat Bow Making Chisels,
Taper-ground blades made of high-quality tool steel (63 HRC), for bow making. Boxwood handles.
Micro Chisel
For deburring grooves on bridges and saddles as well as for cleaning and removing e.g. residual dried glue. The long neck also allows working in deeper areas. HSS
